元素分析的光谱方法检测标准元素分析的光谱方法-中析研究所检测

(CMA)

(CNAS)

(ISO)

(高新技术企业)

元素分析的光谱方法相关标准参考信息

T/CSTM 00012E-2021 钢铁多元素成分及状态分布表征激光诱导击穿光谱原位统计分布分析方法
简介：Thisdocumentspecifiesamethodtocharacterizethemulti-elementcontentsandstatusinironandsteelbyoriginalpositionstatisticdistributionanalysismethodoflaser-inducedbreakdownspectroscopy.Thisdocumentisapplicabletocharacterizethecontentdistribution,locationdistributionandstatedistributionofmulti-elementinironandsteel.Thecontentfrequencystatisticaldistribution,segregationstatisticaldistribution,apparentdensitystatisticaldistribution,statisticfittingdegreestatisticaldistributionandthetype,contentandparticlesizestatisticaldistributionofinclusionscanbecharacterized.
信息：ICS：77.080.01 CCS：A011 发布：2021-11-10 实施：2021-11-17

GJB 5404.12-2005 高温合金痕量元素分析方法第12部分:氢化物发生原子荧光光谱法测定碲含量
简介：警告——使用本部分的人员应有正规实验室工作的实践经验。本部分并未指出所有可能的安全问题。使用者有责任采取适当的安全和健康措施，并符合国家有关法规规定的条件。本部分规定了用氢化物发生一原子荧光光谱法测定高温合金中碲含量的原理、试剂、仪器、分析步骤、结果计算和允许差。本部分适用于高温合金中碲含量的测定。测定范围：0.00005%～0.010%。
信息：ICS： CCS：H25 发布：2005-04-11 实施：2005-07-01

ASTM D6247-98 用X射线荧光光谱法分析聚烯烃中元素含量的标准试验方法
简介：
信息：ICS：83.020 CCS：发布：1998-04-10 实施：

ASTM D4927-20 用波长色散X射线荧光光谱法对润滑剂和添加剂成分进行元素分析的标准试验方法钡钙磷硫锌
简介：
信息：ICS：75.100 CCS：发布：2020-12-01 实施：

GJB 5404.17-2005 高温合金痕量元素分析方法.第17部分:空心阴极光谱法测定.砷、银、锡、锑、碲、砣、铅和铋含量(常规法)
简介：本部分规定了用空心阴极光谱法测定高温合金中砷、银、锡、锑、碲、砣、铅和铋含量的原理、材料、仪器、分析步骤、结果计算和允许差。本部分适用于镍基和钴基高温合金中砷、银、锡、锑、碲、砣、铅和铋含量的测定。
信息：ICS： CCS：H11 发布：2005-04-11 实施：2005-07-01

ANSI/ASTM D6247-1998 通过X射线荧光光谱法对聚烯烃中元素含量分析的试验方法
简介：This test method covers a general procedure for the determination of elemental content in polyolefins by X-ray fluorescence spectrometry, in concentration levels typical of those contributed by additives and reactor processes. Note 1 -Specific methods and capabilities of users may vary with differences in interelement effects and sensitivities, instrumentation and applications software, and practices between laboratories. Development and use of test procedures to measure particular elements, concentration ranges or matrices is the responsibility of individual users. Note 2 -One general method is outlined herein; alternative analytical practices can be followed, and are attached in notes, where appropriate. The values stated in SI units are to be regarded as the standard. The inch-pound units given in brackets are for information only. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. Specific precautionary statements are given in Section 10. Note 3 -There is no similar or equivalent ISO standard.
信息：ICS：83.020 CCS：G31 发布：1998 实施：1998-08-17

ASTM D4927-15(2020) 润滑剂和添加剂成分元素分析的标准试验方法&x2014；用波长色散X射线荧光光谱法测定钡、钙、磷、硫和锌
简介：
信息：ICS：75.100 CCS：发布：2020-05-01 实施：

GJB 5404.4-2005 高温合金痕量元素分析方法第4部分:甲基异丁基酮萃取分离原子荧光光谱法测定镉含量
简介：本部分规定了用甲基异丁基酮萃取分离一原子荧光光谱法测定高温合金中镉含量的原理、试剂、仪器、分析步骤、结果计算和允许差。本部分适用于高温合金中镉含量的测定。测定范围：0.000005%～0.0002%。
信息：ICS： CCS：H25 发布：2005-04-11 实施：2005-07-01

ASTM D4927-1996 润滑油和添加剂元素分析的标准试验方法.用波长色散的X-射线荧光光谱测定法测定钡、钙、磷、硫和锌的含量
简介：1.1 These test methods cover the determination of barium, calcium, phosphorus, sulfur, and zinc in unused lubricating oils at element concentration ranges from 0.03 to 1.0 mass % (0.01 to 2.0 mass % for sulfur). The range can be extended to higher concentrations by dilution of sample specimens. Additives can also be determined after dilution. Two different methods are presented in these test methods.1.2 Test Method A (Internal Standard Procedure)8212;Internal standards are used to compensate for interelement effects of X-ray excitation and fluorescence (see Sections 1-12, and 19).1.3 Test Method B (Mathematical Correction Procedure)8212;The measured X-ray fluorescence intensity for a given element is mathematically corrected for potential interference from other elements present in the sample (see Sections 1-6, and 13-19).1.4 The preferred concentration units are mass percent barium, calcium, phosphorus, sulfur, or zinc.1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
信息：ICS：75.100 (Lubricants, industrial oils and related pr CCS：E34 发布：1996 实施：

T/CSTM 00012-2017 钢铁多元素成分及状态分布表征激光诱导击穿光谱原位统计分布分析方法
简介：本标准规定了激光诱导击穿光谱原位统计分布分析方法表征钢铁中多元素成分及状态分布。本标准适用于表征钢铁中多元素的含量分布、位置分布和状态分布。可进行含量频度统计分布表征，偏析统计分布表征，表观致密度统计分布表征，统计符合度表征以及夹杂物种类、含量和粒度的统计分布表征。
信息：ICS：77.080.01 CCS：C312 发布：2017-12-29 实施：2018-04-10

GJB 5404.9-2005 高温合金痕量元素分析方法第9部分:氢化物发生原子荧光光谱法测定锑含量
简介：警告——使用本部分的人员应有正规实验室工作的实践经验。本部分并未指出所有可能的安全问题。使用者有责任采取适当的安全和健康措施，并符合国家有关法规规定的条件。本部分规定了用氢化物发生一原子荧光光谱法测定镍基高温合金中锑含量的原理、试剂、仪器、分析步骤、结果计算及允许差。本部分适用于银基高温合金中锑含量的测定。测定范围：0.00005%～0.0030%。
信息：ICS： CCS：H25 发布：2005-04-01 实施：2005-07-01

ASTM D5839-1996(2006) 能量发散X射线荧光光谱法分析危险废油中痕量元素的标准试验方法
简介：The analysis of trace elements is often a regulatory and process specific requirement for facilities utilizing LHWF. With proper instrument standardization, set-up, and quality control, this test method provides the user an accurate, rapid, nondestructive method for trace element determinations.1.1 This test method applies to the determination of trace element concentrations by energy-dispersive X-ray fluorescence (EDXRF) spectrometry in typical liquid hazardous waste fuels (LHWF) used by industrial furnaces.1.2 This test method has been used successfully on numerous samples of LHWF that are mixtures of solvents, oils, paints, and pigments for the determination of the following elements: Ag, As, Ba, Cd, Cr, Hg, Ni, Pb, Sb, Se, and Tl.1.3 This test method also may be applicable to elements not listed above and to the analysis of trace metals in organic liquids other than those used as LHWF.1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
信息：ICS：13.030.30 (Special wastes); 75.160.20 (Liquid fuel CCS：Z23 发布：1996 实施：

ASTM D8064-16 使用多个单色激发光束的单色能量色散X射线荧光光谱法进行土壤和固体废物元素分析的标准测试方法
简介：
信息：ICS：13.030.10 CCS：发布：2016-11-01 实施：

ASTM D4927-05 润滑剂和添加剂组分元素分析的标准试验方法&8212；用波长色散X射线荧光光谱法测定钡、钙、磷、硫和锌
简介：
信息：ICS：75.100 CCS：发布：2005-04-01 实施：

ASTM D8064 - 16 使用多个单色激发光束的单色能量色散X射线荧光光谱法进行土壤和固体废物元素分析的标准测试方法
简介：
信息：ICS：13.030.10 CCS：/ 发布：0000-00-00 实施：0000-00-00

KS D 1702-2015(2020) 通过电感耦合等离子体光谱测定分析矩阵匹配方法痕量元素含量的Platium的测定
简介：
信息：ICS：71.040.40 CCS：发布：2015-12-30 实施：

ASTM D4927-2005 润滑剂和添加剂元素分析的标准试验方法.波长色散的X射线荧光光谱测定法测定钡、钙、磷、硫和锌含量
简介：Some oils are formulated with organo-metallic additives which act as detergents, antioxidants, antiwear agents, and so forth. Some of these additives contain one or more of these elements: barium, calcium, phosphorus, sulfur, and zinc. These test methods provide a means of determining the concentration of these elements which in turn provides an indication of the additive content of these oils.1.1 These test methods cover the determination of barium, calcium, phosphorus, sulfur, and zinc in unused lubricating oils at element concentration ranges shown in . The range can be extended to higher concentrations by dilution of sample specimens. Additives can also be determined after dilution. Two different methods are presented in these test methods.1.2 Test Method A (Internal Standard Procedure)Internal standards are used to compensate for interelement effects of X-ray excitation and fluorescence (see Sections through ). 1.3 Test Method B (Mathematical Correction Procedure)The measured X-ray fluorescence intensity for a given element is mathematically corrected for potential interference from other elements present in the sample (see Sections through ).1.4 The preferred concentration units are mass % barium, calcium, phosphorus, sulfur, or zinc.This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
信息：ICS：75.100 (Lubricants, industrial oils and related pr CCS：E34 发布：2005 实施：

简介： 信息：

ASTM D4927-15 润滑剂和添加剂成分元素分析的标准试验方法&x2014；用波长色散X射线荧光光谱法测定钡、钙、磷、硫和锌
简介：
信息：ICS：75.100 CCS：发布：2015-12-01 实施：

ASTM D6247-98(2004) 用X射线荧光光谱法分析聚烯烃中元素含量的标准试验方法
简介：
信息：ICS：83.020 CCS：发布：2004-07-01 实施：

简介： 信息：

ASTM D5839-15 通过能量分散X射线荧光光谱法对危险废物燃料进行痕量元素分析的标准测试方法
简介：
信息：ICS：13.030.30 CCS：发布：2015-05-01 实施：

ASTM D4927-02 润滑剂和添加剂组分元素分析的标准试验方法&8212；用波长色散X射线荧光光谱法测定钡、钙、磷、硫和锌
简介：
信息：ICS：75.100 CCS：发布：2002-11-10 实施：

简介： 信息：

ASTM D4927-2015 润滑剂和添加剂元素分析的标准试验方法. 用波长色散X射线荧光光谱法测定钡, 钙, 磷, 硫和锌的含量
简介：4.1x00a0;Some oils are formulated with organo-metallic additives which act as detergents, antioxidants, antiwear agents, and so forth. Some of these additives contain one or more of these elements: barium, calcium, phosphorus, sulfur, and zinc. These test methods provide a means of determining the concentration of these elements which in turn provides an indication of the additive content of these oils. 4.2x00a0;Several additive elements and their compounds are added to the lubricating oils to give beneficial performance (see Table 2). 1.1x00a0;These test methods cover the determination of barium, calcium, phosphorus, sulfur, and zinc in unused lubricating oils at element concentration ranges shown in Table 1. The range can be extended to higher concentrations by dilution of sample specimens. Additives can also be determined after dilution. Two different methods are presented in these test methods. 1.2x00a0;Test Method A (Internal Standard Procedure)x2014;Internal standards are used to compensate for interelement effects of X-ray excitation and fluorescence (see Sections 8 through 13). 1.3x00a0;Test Method B (Mathematical Correction Procedure)x2014;The measured X-ray fluorescence intensity for a given element is mathematically corrected for potential interference from other elements present in the sample (see Sections 14 through 19). 1.4x00a0;The preferred concentration units are mass8201;% barium, calcium, phosphorus, sulfur, or zinc. 1.5x00a0;This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
信息：ICS：75.100 CCS：发布：2015 实施：

NF A06-903-2002 锡锭的分析方法.用原子光谱法测定等级99.90%和99.85%锡中的杂质元素含量
简介：
信息：ICS：77.040.30;77.150.60 CCS：H13 发布：2002-09-01 实施：2002-09-20

简介： 信息：

ASTM D4927-14 润滑剂和添加剂成分元素分析的标准试验方法&mdash；用波长色散X射线荧光光谱法测定钡、钙、磷、硫和锌
简介：
信息：ICS：75.100 CCS：发布：2014-12-01 实施：

DIN EN 13615-2002 锡铸锭的分析方法.采用原子光谱法对锡等级为99.90%和99.85%的杂质元素含量测定; 德文版本 EN 13615:2001
简介：
信息：ICS：77.040.30;77.150.60 CCS：H13 发布：2002-04 实施：

简介： 信息：

DB34/T 2127.2-2014 区域地球化学调查样品分析方法第2 部分：X 射线荧光光谱法多元素含量的测定
简介：本标准规定了区域地球化学调查样品(土壤、水系沉积物)中 24 种组分的 X 射线荧光光谱测定方法。本标准适用于土壤、水系沉积物样品中 Na2O、MgO、Al2O3、SiO2、P、K2O、CaO、Ba、Ti、V、Cr、Mn、TFe2O3、Co、Ni、Cu、Zn、Ga、Pb、Rb、Sr、Y、Zr、Nb 的测定。
信息：ICS：07.060 CCS：A44 发布：2014-06-24 实施：2014-07-24

ASTM D4927-2002 润滑油和添加剂元素分析的标准试验方法.用波长色散的X-射线荧光光谱测定法测定钡、钙、磷、硫和锌的含量
简介：1.1 These test methods cover the determination of barium, calcium, phosphorus, sulfur, and zinc in unused lubricating oils at element concentration ranges shown in . The range can be extended to higher concentrations by dilution of sample specimens. Additives can also be determined after dilution. Two different methods are presented in these test methods.1.2 Test Method A (Internal Standard Procedure)8212;Internal standards are used to compensate for interelement effects of X-ray excitation and fluorescence (see Sections 1-11, and 17).1.3 Test Method B (Mathematical Correction Procedure)8212;The measured X-ray fluorescence intensity for a given element is mathematically corrected for potential interference from other elements present in the sample (see Sections 1-6, and 12-17).1.4 The preferred concentration units are mass percent barium, calcium, phosphorus, sulfur, or zinc.1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
信息：ICS：75.100 (Lubricants, industrial oils and related pr CCS：E34 发布：2002 实施：

简介： 信息：

DB34/T 2127.3-2014 区域地球化学调查样品分析方法第3 部分：电感耦合等离子体光谱法多元素含量的测定
简介：本标准规定了区域地球化学调查样品电感耦合等离子体发射光谱法多元素含量的测定方法。本标准适用于水系沉积物及土壤样品中锂、铍、钠、镁、磷、钾、钙、钪、钒、锰、镍、铜、锌、锶、镧、铈等十六种主、微量元素含量的测定。
信息：ICS：07.060 CCS：A44 发布：2014-06-24 实施：2014-07-24

ASTM D4927-96 润滑剂和添加剂组分元素分析的标准试验方法&8212；用波长色散X射线荧光光谱法测定钡、钙、磷、硫和锌
简介：
信息：ICS：75.100 CCS：发布：2001-11-10 实施：

简介： 信息：

ASTM D4927-2014 采用波长色散的X-射线荧光光谱法对润滑油和添加剂元素钡, 钙, 磷, 硫和锌进行元素分析的标准试验方法
简介：4.1x00a0;Some oils are formulated with organo-metallic additives which act as detergents, antioxidants, antiwear agents, and so forth. Some of these additives contain one or more of these elements: barium, calcium, phosphorus, sulfur, and zinc. These test methods provide a means of determining the concentration of these elements which in turn provides an indication of the additive content of these oils. 4.2x00a0;Several additive elements and their compounds are added to the lubricating oils to give beneficial performance (see Table 2). 1.1x00a0;These test methods cover the determination of barium, calcium, phosphorus, sulfur, and zinc in unused lubricating oils at element concentration ranges shown in Table 1. The range can be extended to higher concentrations by dilution of sample specimens. Additives can also be determined after dilution. Two different methods are presented in these test methods. 1.2x00a0;Test Method A (Internal Standard Procedure)x2014;Internal standards are used to compensate for interelement effects of X-ray excitation and fluorescence (see Sections 8 through 13). 1.3x00a0;Test Method B (Mathematical Correction Procedure)x2014;The measured X-ray fluorescence intensity for a given element is mathematically corrected for potential interference from other elements present in the sample (see Sections 14 through 19). 1.4x00a0;The preferred concentration units are mass8201;% barium, calcium, phosphorus, sulfur, or zinc. 1.5x00a0;This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
信息：ICS：75.100 CCS：发布：2014 实施：

ASTM D4927-01 润滑剂和添加剂组分元素分析的标准试验方法&8212；用波长色散X射线荧光光谱法测定钡、钙、磷、硫和锌
简介：
信息：ICS：75.100 CCS：发布：2001-11-10 实施：

简介： 信息：

BS ISO 11938-2013 微束分析.电子探针显微分析.使用波长色散光谱对元素映射的分析方法
简介：
信息：ICS：71.040.50 CCS：N33 发布：2013-04-30 实施：2013-04-30

ASTM D5839-96(2001) 通过能量分散X射线荧光光谱法对危险废物燃料进行痕量元素分析的标准测试方法
简介：
信息：ICS：13.030.30 CCS：发布：2001-01-01 实施：

简介： 信息：

ASTM D5839-96 通过能量分散X射线荧光光谱法对危险废物燃料进行痕量元素分析的标准测试方法
简介：
信息：ICS： CCS：发布：2001-01-01 实施：

简介： 信息：

ISO 11938:2012 微束分析——电子探针微量分析——用波长色散光谱法进行元素映射分析的方法
简介：
信息：ICS：71.040.50 CCS：发布：2012-03-06 实施：

ASTM D4927-2001 润滑油和添加剂元素分析的标准试验方法.用波长色散的X-射线荧光光谱测定法测定钡、钙、磷、硫和锌的含量
简介：1.1 These test methods cover the determination of barium, calcium, phosphorus, sulfur, and zinc in unused lubricating oils at element concentration ranges from 0.03 to 1.0 mass % (0.01 to 2.0 mass % for sulfur). The range can be extended to higher concentrations by dilution of sample specimens. Additives can also be determined after dilution. Two different methods are presented in these test methods.1.2 Test Method A (Internal Standard Procedure)8212;Internal standards are used to compensate for interelement effects of X-ray excitation and fluorescence (see Sections 1-12, and 19).1.3 Test Method B (Mathematical Correction Procedure)8212;The measured X-ray fluorescence intensity for a given element is mathematically corrected for potential interference from other elements present in the sample (see Sections 1-6, and 13-19).1.4 The preferred concentration units are mass percent barium, calcium, phosphorus, sulfur, or zinc.1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
信息：ICS：75.100 (Lubricants, industrial oils and related pr CCS：E34 发布：2001 实施：

简介： 信息：

ISO 11938-2012 微束分析. 电子探针微量分析. 使用波长色散光谱对元素映射的分析方法
简介：
信息：ICS：71.040.50 CCS：发布：2012-03 实施：

EN 13615-2001 工业纯铁罐分析方法-原子光谱法测定罐等级99.90％和99.85％杂质元素.合并勘误表-2002年12月
简介：This European Standard specifies atomic spectroscopic methods (Atomic Absorption Spectrometry (AAS) or inductively coupled plasma Atomic Emission Spectrometry (ICP-AES)) intended for the analysis of ingot tin. It is written for use by experienced analysts familiar with atomic spectrometric techniques.
信息：ICS：77.040.30;77.150.60 CCS：发布：2001 实施：

简介： 信息：

ASTM D4927-10 润滑剂和添加剂组分元素分析的标准试验方法&8212；用波长色散X射线荧光光谱法测定钡、钙、磷、硫和锌
简介：
信息：ICS：75.100 CCS：发布：2010-07-01 实施：

BS EN 12938-2000 锡铅合金分析方法.原子光谱法测定合金和杂质元素含量
简介：This European Standard specifies atomic spectroscopic methods (either AAS or AES) for the analysis of pewter alloy defined in EN 611-1.NOTE This method is also suitable for inductively-coupled plasma emission spectrometry (ICP). It is written for use by experienced analysts familiar with atomic spectrometric techniques.
信息：ICS：77.120.60 CCS：H13 发布：2000-02-15 实施：2000-02-15

简介： 信息：

ASTM D4927-2010 波长色散X射线荧光光谱法对润滑剂和钡、钙、磷、硫以及锌等添加组分急性元素分析的标准试验方法
简介：Some oils are formulated with organo-metallic additives which act as detergents, antioxidants, antiwear agents, and so forth. Some of these additives contain one or more of these elements: barium, calcium, phosphorus, sulfur, and zinc. These test methods provide a means of determining the concentration of these elements which in turn provides an indication of the additive content of these oils.1.1 These test methods cover the determination of barium, calcium, phosphorus, sulfur, and zinc in unused lubricating oils at element concentration ranges shown in Table 1. The range can be extended to higher concentrations by dilution of sample specimens. Additives can also be determined after dilution. Two different methods are presented in these test methods. 1.2 Test Method A (Internal Standard Procedure)8212;Internal standards are used to compensate for interelement effects of X-ray excitation and fluorescence (see Sections 8 through 13). 1.3 Test Method B (Mathematical Correction Procedure)8212;The measured X-ray fluorescence intensity for a given element is mathematically corrected for potential interference from other elements present in the sample (see Sections 14 through 19). 1.4 The preferred concentration units are mass % barium, calcium, phosphorus, sulfur, or zinc. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
信息：ICS：75.100 (Lubricants, industrial oils and related pr CCS：E34 发布：2010 实施：

BS EN 12938-2000 (2001) 锡铅合金分析方法.原子光谱法测定合金和杂质元素含量
简介：
信息：ICS： CCS：发布：2000-01-01 实施：2000-01-01

简介： 信息：