多维色谱检测标准多维色谱-中析研究所检测

(CMA)

(CNAS)

(ISO)

(高新技术企业)

多维色谱相关标准参考信息

GB/T 30519-2014 轻质石油馏分和产品中烃族组成和苯的测定多维气相色谱法
简介：本标准规定了用多维气相色谱技术测定轻质石油馏分和产品中烃族组成和苯含量的试验方法。本标准适用于终馏点不高于215℃的轻质石油馏分或产品如汽油调合组分、溶剂油、汽油产品等中的烃族组成和苯含量的测定。测定浓度范围烯烃体积分数(或质量分数)为0.5%~70%、芳烃体积分数(或质量分数)为1%~80%,苯体积分数(或质量分数)为0.2%~10%。对馏程符合本标准要求、由其他非常规原油如页岩或油砂加工得到的汽油产品或由非石油矿物燃料合成加工的烃类燃料如费托合成油等本方法也同样适用。超出含量范围的样品本方法也可测定,但没有给出精密度数据。对车用汽油,为改善汽油产品性能或其他目的,常含有醚类或醇类含氧化合物组分,也可能有多种含氧化合物组分共存,此时样品中的醚类化合物会随烯烃组分一起出峰,醇类化合物则随C 芳烃组分一起出峰。对于含有含氧化合物的汽油样品,用相关试验方法(如SH/T 0663)测定其中的含氧化合物类型和含量,并参照附录A的步骤对烃族组成结果进行必要校正后,适用于本标准。本标准不适用于测定除苯外的各烃族中的单体组分含量。
信息：ICS：75.160.20 CCS：E31 发布：2014-02-19 实施：2014-06-01

SN/T 4441-2016 进出口化妆品中甲醇的测定多维气相色谱-质谱联用法
简介：
信息：ICS：71.100.70 CCS：Y42 发布：2016-03-09 实施：2016-10-01

SN/T 3362-2012 汽油中烃类、含氧化合物及苯含量的试验方法多维气相色谱法
简介：1.1本标准规定了运用多维色谱法测定汽油中的饱和烃、烯烃、芳烃和含氧化合物的含量，各烃类的含量可以按碳原子个数或总量报告。1.2本标准适用于总芳烃含量不大于50%(体积分数)，总烯烃含量不大于30%(体积分数)和含氧化合物含量不大于15%(体积分数)的汽油的测定。1.3本标准不适用于测定除苯以外的单个烃类组分。1.4在ASTM D4815标准中所列举的含氧化合物不会干扰本方法对烃类组分的测定。在该系列样品内，本标准已对下列含氧化合物进行了测定：甲基叔丁基醚(MTBE)，乙醇，乙基叔丁基醚(ETBE)和叔戊基甲醚(TAME)。其他含氧化合物可以用ASTM D4815或ASTM D5599标准进行定量测定。1.5本标准不适用于含有85%的甲醇和乙醇的M85和E85燃料。
信息：ICS： CCS：E31 发布：2012-12-12 实施：2013-07-01

GB/T 28768-2012 车用汽油烃类组成和含氧化合物的测定.多维气相色谱法
简介：本标准规定了采用气相色谱法测定车用汽油中饱和烃、烯烃和芳烃的方法。本标准也可测定车用汽油中苯含量、含氧化合物和总氧含量。本标准适用于测定总芳烃含量(体积分数)为不大于50%,总烯烃含量(体积分数)为1.5%～30%, 含氧化合物含量(体积分数)为0.8%～15%,总氧含量(质量分数)为1.5%～3%,苯含量(体积分数)为不大于2%的车用汽油。
信息：ICS：75.160.20 CCS：E31 发布：2012-11-05 实施：2013-03-01

SN/T 4438-2016 原油中甲醇含量的测定多维气相色谱法
简介：
信息：ICS：75.080 CCS：E30 发布：2016-03-09 实施：2016-10-01

ASTM D5507-99(2012) 通过毛细管柱/多维气相色谱法测定单体级氯乙烯中痕量有机杂质的标准测试方法
简介：
信息：ICS：83.080.20 CCS：发布：2012-10-10 实施：

ASTM D6296-22 多维气相色谱法测定火花点火发动机燃料中总烯烃的标准试验方法
简介：
信息：ICS：71.040.50 CCS：发布：2022-04-01 实施：

ISO 22854:2016 液体石油产品 - 车用汽油和乙醇中烃类和氧化物的测定（E85）汽车燃料 - 多维气相色谱法
简介：
信息：ICS：75.080 CCS：发布：2016-03-09 实施：

ASTM D7754-11 用多维气相色谱法测定汽车火花点火发动机燃料中痕量氧化合物的标准试验方法
简介：
信息：ICS：75.160.20 CCS：发布：2011-10-01 实施：

ASTM D7059-21 多维气相色谱法测定原油中甲醇的标准试验方法
简介：
信息：ICS：75.040 CCS：发布：2021-12-01 实施：

ISO 22854-2016 液化石油产品. 汽车发动机汽油和乙醇(E85)汽车燃料中烃类和氧化物的测定. 多维气相色谱法
简介：
信息：ICS：75.080;75.160.20 CCS：E31 发布：2016-03 实施：

ASTM D7754-11e1 用多维气相色谱法测定汽车火花点火发动机燃料中痕量氧化合物的标准试验方法
简介：
信息：ICS：75.160.20 CCS：发布：2011-10-01 实施：

BS EN ISO 22854-2021 液化石油产品. 汽车发动机汽油和乙醇 (E85) 汽车燃料中烃类和氧化物的测定. 多维气相色谱法
简介：
信息：ICS：75.080 CCS：E31 发布：2021-08-06 实施：2021-08-06

BS EN 14534-2016 (2017) 石油及其产品的试验方法.BS 2000-526:液体石油产品.汽油中烃类和氧化物的测定.多维气相色谱法
简介：
信息：ICS： CCS：发布：2016-01-01 实施：2016-01-01

ASTM D7754-2011e1 使用多维气相色谱法测定汽车火花点火发动机燃料中微量增氧剂的标准试验方法
简介：5.1x00a0;The analysis of trace oxygenates in automotive spark-ignition engine fuel has become routine in certain areas to ensure compliance whenever oxygenated fuels are used. In addition, test methods to measure trace levels of oxygenates in automotive spark-ignition fuel are necessary to assess product quality. 1.1x00a0;This test method covers the determination of trace oxygenates in automotive spark-ignition engine fuel. The method used is a multidimensional gas chromatographic method using 1,2-dimethoxy ethane as the internal standard. The oxygenates that are analyzed are: methyl-tertiary butyl ether (MTBE), ethyl-tertiary butyl ether (ETBE), diisopropyl ether (DIPE), methanol, tertiary-amyl methyl ether (TAME), n-propanol, i-propanol, n-butanol, i-butanol, tert-butyl alcohol, sec-butyl alcohol, and tert-pentanol. Ethanol is usually not measured as a trace oxygenate since ethanol can be used as the main oxygenate compound in finished automotive spark-ignition fuels such as reformulated automotive spark-ignition fuels. The concentration range of the oxygenates covered in the ILS study was from 10 x00b5;g/Kg to 2000 x00b5;g/Kg. In addition this method is also suitable for the measurement of the C5 isomeric alcohols (2-methyl-1-butanol, 2-methyl-2-butanol) present from the fermentation of ethanol. 1.2x00a0;The ethanol blending concentration for which this test method applies ranges from 1 to 15% by volume. Higher concentrations of ethanol coelute with methanol in the analytical column. Lower levels of ethanol, similar to the other oxygenate, can be calibrated and analyzed also. If higher ethanol concentrations are expected, the window cutting technique can be used to avoid ethanol from entering the analytical column and interfere with the determination of the other oxygenates of interest. Refer to Appendix X1 for details. 1.3x00a0;The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.3.1x00a0;Alternate units, in common usage, are also provided to increase clarity and aid the users of this test method. 1.4x00a0;This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
信息：ICS：75.160.20 CCS：发布：2011 实施：

ISO 22854:2021 液体石油产品 - 车用汽油和乙醇中烃类和氧化物的测定（E85）汽车燃料 - 多维气相色谱法
简介：
信息：ICS：75.080 CCS：发布：2021-07-21 实施：

ASTM D7754-16 用多维气相色谱法测定汽车火花点火发动机燃料中痕量氧化合物的标准试验方法
简介：
信息：ICS：75.160.20 CCS：发布：2016-01-01 实施：

ASTM D7754-2011 用多维气象色谱分析仪测定自动火花点火发动机燃油中痕量氧化剂的标准试验方法
简介：The analysis of trace oxygenates in automotive spark-ignition engine fuel has become routine in certain areas to ensure compliance whenever oxygenated fuels are used. In addition, test methods to measure trace levels of oxygenates in automotive spark-ignition fuel are necessary to assess product quality.1.1 This test method covers the determination of trace oxygenates in automotive spark-ignition engine fuel. The method used is a multidimensional gas chromatographic method using 1,2-dimethoxy ethane as the internal standard. The oxygenates that are analyzed are: methyl-tertiary butyl ether (MTBE), ethyl-tertiary butyl ether (ETBE), diisopropyl ether (DIPE), methanol, tertiary-amyl methyl ether (TAME), n-propanol, i-propanol, n-butanol, i-butanol, tert-butyl alcohol, sec-butyl alcohol, and tert-pentanol. Ethanol is usually not measured as a trace oxygenate since ethanol can be used as the main oxygenate compound in finished automotive spark-ignition fuels such as reformulated automotive spark-ignition fuels. The concentration range of the oxygenates covered in the ILS study was from 10 x00B5;g/Kg to 2000 x00B5;g/Kg. In addition this method is also suitable for the measurement of the C5 isomeric alcohols (2-methyl-1-butanol, 2-methyl-2-butanol) present from the fermentation of ethanol. 1.2 The ethanol blending concentration for which this test method applies ranges from 1 to 15% by volume. Higher concentrations of ethanol coelute with methanol in the analytical column. Lower levels of ethanol, similar to the other oxygenate, can be calibrated and analyzed also. If higher ethanol concentrations are expected, the window cutting technique can be used to avoid ethanol from entering the analytical column and interfere with the determination of the other oxygenates of interest. Refer to Appendix X1 for details. 1.3 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.3.1 Alternate units, in common usage, are also provided to increase clarity and aid the users of this test method. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
信息：ICS：75.160.20 (Liquid fuels) CCS：E31 发布：2011 实施：

ISO 22854-2021 液化石油产品. 汽车发动机汽油和乙醇(E85)汽车燃料中烃类和氧化物的测定. 多维气相色谱法
简介：
信息：ICS：75.080 CCS：E31 发布：2021-07-00 实施：

ASTM D7754-2016 采用多维气相色谱法测定汽车火花点火发动机燃料中痕量充氧剂的标准试验方法
简介：5.1x00a0;The analysis of trace oxygenates in automotive spark-ignition engine fuel has become routine in certain areas to ensure compliance whenever oxygenated fuels are used. In addition, test methods to measure trace levels of oxygenates in automotive spark-ignition fuel are necessary to assess product quality. 1.1x00a0;This test method covers the determination of trace oxygenates in automotive spark-ignition engine fuel. The method used is a multidimensional gas chromatographic method using 1,2-dimethoxy ethane as the internal standard. The oxygenates that are analyzed are: methyl-tertiary butyl ether (MTBE), ethyl-tertiary butyl ether (ETBE), diisopropyl ether (DIPE), methanol, tertiary-amyl methyl ether (TAME), n-propanol, i-propanol, n-butanol, i-butanol, tert-butyl alcohol, sec-butyl alcohol, and tert-pentanol. Ethanol is usually not measured as a trace oxygenate since ethanol can be used as the main oxygenate compound in finished automotive spark-ignition fuels such as reformulated automotive spark-ignition fuels. The concentration range of the oxygenates covered in the ILS study was from 108201;mg/kg to 20008201;mg/kg. In addition this method is also suitable for the measurement of the C5 isomeric alcohols (2-methyl-1-butanol, 2-methyl-2-butanol) present from the fermentation of ethanol. 1.2x00a0;The ethanol blending concentration for which this test method applies ranges from 18201;% to 15% by volume. Higher concentrations of ethanol coelute with methanol in the analytical column. Lower levels of ethanol, similar to the other oxygenate, can be calibrated and analyzed also. If higher ethanol concentrations are expected, the window cutting technique can be used to avoid ethanol from entering the analytical column and interfere with the determination of the other oxygenates of interest. Refer to Appendix X1 for details. 1.3x00a0;The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.3.1x00a0;Alternative units, in common usage, are also provided to increase clarity and aid the users of this test method. 1.4x00a0;This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
信息：ICS：75.160.20 CCS：发布：2016 实施：

NB/SH/T 0741-2010 汽油中烃族组成的测定.多维气相色谱法
简介：本标准规定了用多维气相色谱的方法测定成品汽油或汽油调合组分中的饱和烃、烯烃、芳烃和苯含量。本标准适用于终馏点不高于210℃的石油馏分中饱和烃、烯烃、芳烃和苯含量的测定。浓度范围适用于烯烃体积分数0.5％～70％，、芳烃体积分数1％～80％，和苯体积分数0．2％～10％的石油馏分或成品汽油。超出该含量范围的样品该方法也能测定，但没有给出精密度数据。对馏程符合本标准要求、由其他非常规原油如页岩或油砂加工得到的汽油产品或由非石油矿物燃料合成加工的烃类燃料本标准也同样适用，但未给出精密度数据。有些汽油样品含有醚类或醇类含氧化合物组分，也可能含有多种含氧化合物组分。醚类化合物随烯烃组分出峰，醇类化合物则随非苯芳烃组分出峰。此时应根据相关试验方法如(SH／T 0663)测得的含氧化合物的类型及含量对按本标准试验步骤测定的烃组成结果进行必要的校正。本标准不适合测定除苯外的各烃族中的单体组分含量。本标准采用国际单位制[SI]单位。本标准没有对所涉及到的所有安全问题提出建议。因此，在使用本标准前，用户必须建立适当的安全和保护措施并制订相应的管理制度。
信息：ICS：75.160.20 CCS：E31 发布：2010-05-01 实施：2010-10-01

ASTM D5507-21a 通过毛细管柱/多维气相色谱法测定单体级氯乙烯中痕量有机杂质的标准测试方法
简介：
信息：ICS：83.080.20 CCS：发布：2021-05-01 实施：

ASTM D7845-2016 采用多维气象色谱/质谱法测定船用燃料油中的化学物质的标准试验方法
简介：5.1x00a0;The test method allows the quantitation of chemical species at low levels in marine fuel oils and cutter stocks. A great many types and concentrations of chemical species are found in marine fuel oils. A root cause relationship between the presence of such species or their concentration in fuels and any failure modes allegedly induced by the use of these fuels has not been established. This test method is necessary to establish test conditions required for future ISO 8217:2010 as defined in section 5.5 and Annex B item (d). Additional compounds may be determined by using the same conditions and by selecting required mass spectral selected ions, accordingly. 1.1x00a0;This test method covers the quantitative determination of a variety of chemical species in marine fuel oil (bunker fuel oil) by gas chromatography/mass spectrometry. By using the same conditions and by selecting required mass spectral selected ions, the test method may be used for the determination of other species than those for which precision statements and limits of detection have been established. 1.2x00a0;An example list of chemical species for which a limit of quantification has been determined by means of this test method is given in Table 1. 1.3x00a0;Other refinery hydrocarbon fractions and their mixtures may be tested using the same test method conditions. However, the precision of this test method reflects the compounds in Table 1. 1.4x00a0;Results are reported to the nearest 1.08201;mg/kg. 1.5x00a0;The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.6x00a0;This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
信息：ICS：47.020.20 CCS：发布：2016 实施：

GOST R EN ISO 22854-2010 液体石油产品.机动车辆汽油.多维气相色谱法测定碳氢化合物类型与氧化物的方法
简介：
信息：ICS：75.160.20 CCS：发布：2010 实施：2012-07-01

ASTM D6839-21a 多维气相色谱法测定火花点火发动机燃料中碳氢化合物类型、含氧化合物、苯和甲苯的标准试验方法
简介：
信息：ICS：71.040.40 CCS：发布：2021-05-01 实施：

BS PD CEN/TR 15745-2015 液体石油产品.使用多维气相色谱法测定碳氢化合物和含氧化合物.循环法研究报告
简介：
信息：ICS：75.160.20 CCS：E30 发布：2015-05-31 实施：2015-05-31

ASTM D5443-04(2009)e1 通过200&176的石油馏分中石蜡、环烷和芳烃类型分析的标准试验方法；多维气相色谱法
简介：
信息：ICS：75.080 CCS：发布：2009-12-01 实施：

ASTM D5507-21 通过毛细管柱/多维气相色谱法测定单体级氯乙烯中痕量有机杂质的标准测试方法
简介：
信息：ICS：83.080.20 CCS：发布：2021-01-15 实施：

ASTM D7059-09 用多维气相色谱法测定原油中甲醇的标准试验方法
简介：
信息：ICS：75.040 CCS：发布：2009-10-01 实施：

ASTM D7845-20 通过多维气相色谱/质谱法测定海洋燃料油中化学物质的标准测试方法
简介：
信息：ICS：47.020.20 CCS：发布：2020-06-15 实施：

PD CEN/TR 15745-2015 液体石油产品.烃类和含氧化合物多维气相色谱法的测定.轮循研究报告
简介：
信息：ICS：75.160.20 CCS：E22 发布：2015-04-01 实施：

BS EN ISO 22854-2008 液态石油产品.汽车发动机汽油中烃类及氧化物的测定.多维气相色谱分析法
简介：
信息：ICS：75.080 CCS：E30 发布：2009-02-28 实施：2009-02-28

ASTM D7754-19 用多维气相色谱法测定汽车火花点火发动机燃料中痕量氧化合物的标准试验方法
简介：
信息：ICS：75.160.20 CCS：发布：2019-11-01 实施：

DIN EN ISO 22854-2014 液化石油制品. 汽车发动机汽油和乙醇(E85)汽车燃料中烃类和氧化物的测定. 多维气相色谱法(ISO 22854-2014); 德文版本EN ISO 22854-2014
简介：
信息：ICS：75.160.20 CCS：E31 发布：2014-07 实施：

DIN EN ISO 22854-2009 液体石油产品.汽车发动机汽油中烃类和氧化物的测定.多维气相色谱法
简介：This International Standard specifies the gas chromatographic (GC) method for the determination ofsaturated, olefinic and aromatic hydrocarbons in automotive motor gasoline. Additionally, the benzenecontent, oxygenate compounds and total oxygenate content can be determined.This International Standard is applicable to automotive motor gasoline with a total content of aromatics of upto 50 % (V/V); a total olefin content from about 1,5 % (V/V) up to 30 % (V/V); oxygenate compounds, from0,8 % (V/V) up to 15 % (V/V); a total oxygen content from about 1,5 % (m/m) to about 3 % (m/m); and abenzene content of up to 2 % (V/V).NOTE 1 For the purposes of this document, the terms "% (m/m)" and "% (V/V)" are used the represent, respectively,the mass fraction and the volume fraction.NOTE 2 While developing this method, the final boiling point was limited to 215 ~C.NOTE 3 For oxygenate compounds, precision data have been established on automotive motor gasoline samplescontaining ethyl-tert-butyl ether (ETBE), methyl-tert-butyl ether (MTBE), tert-amyl-methyl ether (TAME), iso-propanol, iso-butanol, tert-butanol, methanol and ethanol. The derived precision data for methanol do not comply with the precisioncalculation as presented in this International Standard. Applicability of this International Standard has also been verified forthe determination of n-propanol, acetone, and di-isopropyl ether (DIPE). However, no precision data have beendetermined for these compounds.Although this test method can be used to determine higher-olefin contents of up to 50 % (V/V), the precisionfor olefins was tested only in the range from about 1,5 % (V/V) to about 30 % (V/V).Although specifically developed for the analysis of automotive motor gasoline that contains oxygenates, thistest method can also be applied to other hydrocarbon streams having similar boiling ranges, such as naphthasand reformates.NOTE 4 There can be an overlap between C9 and C10 aromatics. However, the total is accurate. Isopropyl benzene isresolved from the C8 aromatics and is included with the other C9 aromatics.
信息：ICS：75.160.20 CCS：E31 发布：2009-01 实施：

DB32/T 3636-2019 车用汽油中甲缩醛含量的测定多维气相色谱法
简介：
信息：ICS：75.160.20 CCS：E31 发布：2019-09-19 实施：2019-10-31

BS EN ISO 22854-2014 液化石油产品. 汽车发动机汽油和乙醇 (E85) 汽车燃料中烃类和氧化物的测定. 多维气相色谱法
简介：
信息：ICS：75.080 CCS：E31 发布：2014-06-30 实施：2014-06-30

ASTM D7059-2009(2013) 采用多维气相色谱法测定原油中甲醇的标准试验方法
简介：5.1x00a0;Methanol is used in production of crude oil to prevent formation of gas hydrates. The presence of residual methanol in crude oils can lead to costly problems in refinery operations. 1.1x00a0;This test method covers the determination of methanol in crude oils by direct injection multidimensional gas chromatography in the concentration range of 15 to 900 ppm (m/m). The pooled limit of quantification (PLOQ) is 15 ppm (m/m). 1.2x00a0;This test method is applicable only to crude oils containing less than or equal to 0.18201;% (v/v) water. 1.3x00a0;This test method has not been tested with crude oil samples that are solid or waxy, or both, at ambient temperatures. 1.4x00a0;The values stated in SI units are to be regarded as standard. Alternate units, in common usage, are also provided to increase clarity and aid the users of this test method. 1.5x00a0;This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
信息：ICS：75.040 (Crude petroleum) CCS：发布：2009 实施：

ASTM D5443-14(2018) 通过200&xb0的石油馏分中石蜡、环烷和芳烃类型分析的标准试验方法；多维气相色谱法
简介：
信息：ICS：75.080 CCS：发布：2018-10-01 实施：

NF M07-114-2014 液化石油产品. 汽车发动机汽油和乙醇(E85)汽车燃料中烃类和氧化物的测定. 多维气相色谱法
简介：La présente Norme internationale spécifie une méthode pour la détermination par chromatographie en phase gazeuse des teneurs en hydrocarbures saturés, oléfiniques et aromatiques dans les essences pour moteurs automobile et dans les carburants automobiles à base d'éthanol (Superéthanol ou E85). En outre, les teneurs en benzène, en composés oxygénés et en oxygène total peuvent être mesurées par cette méthode.
信息：ICS：75.160.20 CCS：E31 发布：2014-05-09 实施：2014-05-09

ASTM D7059-2009 用多维气相色谱法测定原油中甲醇的试验方法
简介：Methanol is used in production of crude oil to prevent formation of gas hydrates. The presence of residual methanol in crude oils can lead to costly problems in refinery operations.1.1 This test method covers the determination of methanol in crude oils by direct injection multidimensional gas chromatography in the concentration range of 15 to 900 ppm (m/m). The pooled limit of quantification (PLOQ) is 15 ppm (m/m). 1.2 This test method is applicable only to crude oils containing less than or equal to 0.1 % (v/v) water. 1.3 This test method has not been tested with crude oil samples that are solid or waxy, or both, at ambient temperatures. 1.4 The values stated in SI units are to be regarded as standard. Alternate units, in common usage, are also provided to increase clarity and aid the users of this test method. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
信息：ICS：75.040 (Crude petroleum) CCS：E21 发布：2009 实施：

ASTM D6296-98(2017) 通过多维气相色谱法测定火花点火发动机燃料中全部烯烃的标准试验方法
简介：
信息：ICS：71.040.50 CCS：发布：2017-10-01 实施：

ISO 22854-2014 液化石油产品. 汽车发动机汽油和乙醇(E85)汽车燃料中烃类和氧化物的测定. 多维气相色谱法
简介：
信息：ICS：75.080;75.160.20 CCS：E31 发布：2014-03 实施：

BS PD CEN/TR 15745-2008 液体石油产品.使用多维气相色谱法测定碳氢化合物和含氧化合物.循环法研究报告
简介：This Technical Report presents the study on the application of EN 14517 to other oxygenates. This reportsupports an extension of the scope of the method, which has been explicitly requested by ISO/TC 28 at thetime of revision of EN 14517 and was agreed to result in the parallel Standard EN ISO 22854.This report is published as background information to judge the approval of the use of the method for thedetermination of all oxygenates as mentioned in the European Fuels Directive. Next, this report shouldsupport the use of multidimensional chromatography as the method for disputes on oxygenates in EN 228
信息：ICS：75.160.20 CCS：E30 发布：2008-12-31 实施：2008-12-31

ASTM D7059-09(2017) 用多维气相色谱法测定原油中甲醇的标准试验方法
简介：
信息：ICS：75.040 CCS：发布：2017-10-01 实施：

ASTM D5443-2014 用多维气相色谱法分析通过200 ℃时石油馏份中石蜡, 环烷和芳烃类型的标准试验方法
简介：4.1x00a0;A knowledge of the composition of hydrocarbon refinery streams is useful for process control and quality assurance. 4.2x00a0;Aromatics in gasoline are soon to be limited by federal mandate. This test method can be used to provide such information. 1.1x00a0;This test method covers the determination of paraffins, naphthenes, and aromatics by carbon number in low olefinic hydrocarbon streams having final boiling points of 200 x00b0;C or less. Hydrocarbons with boiling points greater than 200 x00b0;C and less than 270 x00b0;C are reported as a single group. Olefins, if present, are hydrogenated and the resultant saturates are included in the paraffin and naphthene distribution. Aromatics boiling at C9 and above are reported as a single aromatic group. 1.2x00a0;This test method is not intended to determine individual components except for benzene and toluene that are the only C6 and C7 aromatics, respectively, and cyclopentane that is the only C5 naphthene. The lower limit of detection for a single hydrocarbon component or group is 0.05 % by mass. 1.3x00a0;This test method is applicable to hydrocarbon mixtures including virgin, catalytically converted, thermally converted, alkylated and blended naphtha. 1.4x00a0;The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.4.1x00a0;The abbreviation for SI unit x201c;coulombx201d; is x201c;Cx201d;. 1.5x00a0;This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. Specific precautionary statements are given in Section 7 and Table 1.
信息：ICS： CCS：发布：2014 实施：

NF M07-114-2008 液化石油制品.汽油中烃类和氧化物的测定.多维气相色谱法
简介：
信息：ICS：75.080 CCS：E31 发布：2008-11-01 实施：2008-11-29

ASTM D7845-17 通过多维气相色谱/质谱法测定海洋燃料油中化学物质的标准测试方法
简介：
信息：ICS：47.020.20 CCS：发布：2017-01-15 实施：

ASTM D6296-98(2013) 通过多维气相色谱法测定火花点火发动机燃料中全部烯烃的标准试验方法
简介：
信息：ICS：71.040.50 CCS：发布：2013-10-01 实施：

ISO 22854-2008 液态石油产品.汽车发动机汽油中烃类及氧化物的测定.多维气相色谱分析法
简介：
信息：ICS：75.080;75.160.20 CCS：E30 发布：2008-10 实施：

BS EN 14534-2016 石油及其产品的试验方法.BS 2000-526:液体石油产品.汽油中烃类和氧化物的测定.多维气相色谱法
简介：
信息：ICS：03.240 CCS：E30 发布：2016-05-31 实施：2016-05-31

ASTM D7059-09(2013) 用多维气相色谱法测定原油中甲醇的标准试验方法
简介：
信息：ICS：75.040 CCS：发布：2013-10-01 实施：

ISO 22854:2008 液态石油产品.车用汽油中碳氢化合物类型和氧化物的测定.多维气相色谱法
简介：
信息：ICS：75.080 CCS：发布：2008-09-30 实施：

ASTM D7845-13 用多维气相色谱法测定船用燃料油中化学物质的标准试验方法&ndash；质谱
简介：
信息：ICS：47.020.20 CCS：发布：2013-04-01 实施：

ASTM D6296-98(2008) 通过多维气相色谱法测定火花点火发动机燃料中全部烯烃的标准试验方法
简介：
信息：ICS：71.040.50 CCS：发布：2008-05-01 实施：

ASTM D7845-16 通过多维气相色谱/质谱法测定海洋燃料油中化学物质的标准测试方法
简介：
信息：ICS：47.020.20 CCS：发布：2016-04-01 实施：

ASTM D7845-2013 用多维气相色谱法和质量色谱法测定船用燃油的化学种类的标准试验方法
简介：5.1x00a0;The test method allows the quantitation of chemical species at low levels in marine fuel oils and cutter stocks. A great many types and concentrations of chemical species are found in marine fuel oils. A root cause relationship between the presence of such species or their concentration in fuels and any failure modes allegedly induced by the use of these fuels has not been established. This method is necessary to establish test conditions required for future ISO 8217:2010 Petroleum products- Fuels (class F)-Specifications of marine fuel oils as defined in section 5.5 and Annex B item (d). Additional compounds may be determined by using the same conditions and by selecting required mass spectral selected ions, accordingly. 1.1x00a0;This test method covers the quantitative determination of a variety of chemical species in marine fuel oil (bunker fuel oil) by gas chromatography x2013; mass spectrometry. By using the same conditions and by selecting required mass spectral selected ions, the test method may be used for the determination of other species than those for which precision statements and limits of detection have been established. 1.2x00a0;An example list of chemical species for which a limit of quantification has been determined by means of this test method is given in Table 1.TABLE 1 Component Table x00a0; Limit of Quantitation mg/kg n-butyl alcohol 10 Cyclohexanol 10 n-butyl ether 10 n-butyl acylate 10 Styrene 10 alpha-pinene 10 Phenol 20 alpha-methyl styrene 10 beta-pinene 10 4-methyl styrene
信息：ICS：47.020.20 (Marine engines and propulsion systems); CCS：E31 发布：2013 实施：

ASTM D5507-99(2008)e1 通过毛细管柱/多维气相色谱法测定单体级氯乙烯中痕量有机杂质的标准测试方法
简介：
信息：ICS：83.080.20 CCS：发布：2008-03-01 实施：