toc检测标准toc-中析研究所检测

(CMA)

(CNAS)

(ISO)

(高新技术企业)

toc相关标准参考信息

GB/T 32116-2015 循环冷却水中总有机碳(TOC)的测定
简介：本标准规定了循环冷却水中总有机碳(TOC)的测定方法：在线TOC仪测定法及仪器分析法。本标准适用于循环冷却水中含量在0.1 mg/L～1 000 mg/L总有机碳的分析，也适用于地表水、地面水、回用水中总有机碳的测定。
信息：ICS：71.040.40 CCS：G76 发布：2015-10-09 实施：2016-05-01

HVAC SYSTEMS AND EQUIPMENT IP TOC-2012
简介：Preface The 2012 ASHRAE Handbook??HVAC Systems and Equipment discusses various systems and the equipment (components or assemblies) they comprise@ and describes features and differences. This information helps system designers and operators in selecting and using equipment. An accompanying CD-ROM contains all the volume's chapters in both I-P and SI units.
信息：ICS：/ CCS：/ 发布：2012-01-01 实施：2012-07-13

HVAC SYSTEMS AND EQUIPMENT SI TOC-2008
简介：Preface The 2008 ASHRAE Handbook??HVAC Systems and Equipment discusses various systems and the equipment (components or assemblies) that comprise them@ and describes features and differences. This information helps system designers and operators in selecting and using equipment. An accompanying CD-ROM contains all the volume's chapters in both I-P and SI units. This edition includes two new chapters@ described as follows: ? Chapter 16@ Ultraviolet Lamp Systems@ includes a review of the fundamentals of UVC germicidal energy's impact on microorganisms; how UVC lamps generate germicidal radiant energy; common approaches to the application of UVGI systems for upper-air room@ in-duct@ and surface cleansing; and a review of human safety and maintenance issues. ? Chapter 17@ Combustion Turbine Inlet Cooling (CTIC)@ provides a detailed discussion of how CTIC is used to help improve combustion turbine performance. Some of the revisions and additions to the remainder of the volume are as follows: ? Chapters 1 to 5 have each been revised to include new system and process flow diagrams@ plus new discussion content on commissioning@ building automation@ maintenance management@ sustainability/ green design@ security@ and various systems (e.g.@ underfloor air distribution@ chilled beams). ? Chapter 7@ Combined Heat and Power Systems@ formerly entitled Cogeneration Systems and Engine and Turbine Drives@ was reorganized@ as well as updated for new technology. ? Chapter 11@ District Heating and Cooling@ has new guidance on construction cost considerations@ central plants@ and distribution systems. ? Chapter 12@ Hydronic Heating and Cooling@ has revised text and figures on all aspects of system design@ including design procedure@ water temperatures@ heat transfer@ distribution losses@ constant- and variable-speed pumping@ sizing control valves@ and terminal units. ? Chapter 18@ Duct Construction@ has new guidance for installation of flexible ducts. ? Chapter 19@ Room Air Distribution Equipment@ was reorganized to coordinate with its companion chapter in HVAC Applications@ with added content on equipment for stratified and partially stratified systems. ? Chapter 24@ Mechanical Dehumidifiers and Related Components@ has new content on installation and service@ indoor pool dehumidifiers@ and application considerations for various equipment types. ? Chapter 26@ Air-Heating Coils@ has new text on installation guidelines. ? Chapter 27@ Unit Ventilators@ Unit Heaters@ and Makeup Air Units@ has updated content on makeup air units. ? Chapter 30@ Automatic Fuel-Burning Systems@ extensively reorganized and revised@ contains updated information on new technology and code requirements. ? Chapter 31@ Boilers@ has new material on condensing boilers@ burner types@ and operating and safety controls. ? Chapter 32@ Furnaces@ has been thoroughly revised to reflect new technology and code requirements. ? Chapter 34@ Chimney@ Vent@ and Fireplace Systems@ has been reorganized for clarity and has new content on designing fireplaces and their chimneys. ? Chapter 36@ Solar Energy Equipment@ has been reorganized and has new content on photovoltaic systems and testing ating. ? Chapter 37@ Compressors@ has been reorganized and has updates on bearings and variable-speed drive technology. ? Chapter 38@ Condensers@ contains revised content on air-cooled condensers@ particularly on type descriptions@ heat transfer@ pressure drop@ testing ating@ and installation and maintenance. ? Chapter 40@ Evaporative Air Cooling Equipment@ has a rewritten section on indirect coolers. ? Chapter 42@ Liquid-Chilling Systems@ has new discussion on both refrigerant selection and variable-flow chilled-water systems@ as well as new and improved figures. ? Chapter 44@ Motors@ Motor Controls@ and Variable-Speed Drives@ has updates for new technology and codes. ? Chapter 48@ Unitary Air Conditioners and Heat Pumps@ has new content on multisplit units@ variable-refrigerant-flow (VRF) equipment@ certification@ and sustainability. This volume is published@ both as a bound print volume and in electronic format on a CD-ROM@ in two editions: one using inchpound (I-P) units of measurement@ the other using the International System of Units (SI). Corrections to the 2005@ 2006@ and 2007 Handbook volumes can be found on the ASHRAE Web site at http://www.ashrae.org and in the Additions and Corrections section of this volume. Corrections for this volume will be listed in subsequent volumes and on the ASHRAE Web site. Reader comments are enthusiastically invited. To suggest improvements for a chapter@ please comment using the form on the ASHRAE Web site@ write to Handbook Editor@ ASHRAE@ 1791 Tullie Circle@ Atlanta@ GA 30329@ or fax 678-539-2187@ or e-mail mowen @ashrae.org.
信息：ICS：/ CCS：/ 发布：2008-01-01 实施：2008-07-22

GB 13193-1991 水质总有机碳(TOC) 的测定非色散红外线吸收法
简介：
信息：ICS： CCS：Z16 发布：1991-08-31 实施：1992-06-01

ASHRAE HVAC SYSTEMS AND EQUIPMENT SI TOC-2012
简介：
信息：ICS： CCS：发布：2012-01-01 实施：

HVAC SYSTEMS AND EQUIPMENT IP TOC-2008
简介：Preface The 2008 ASHRAE Handbook??HVAC Systems and Equipment discusses various systems and the equipment (components or assemblies) that comprise them@ and describes features and differences. This information helps system designers and operators in selecting and using equipment. An accompanying CD-ROM contains all the volume's chapters in both I-P and SI units. This edition includes two new chapters@ described as follows: ? Chapter 16@ Ultraviolet Lamp Systems@ includes a review of the fundamentals of UVC germicidal energy's impact on microorganisms; how UVC lamps generate germicidal radiant energy; common approaches to the application of UVGI systems for upper-air room@ in-duct@ and surface cleansing; and a review of human safety and maintenance issues. ? Chapter 17@ Combustion Turbine Inlet Cooling (CTIC)@ provides a detailed discussion of how CTIC is used to help improve combustion turbine performance. Some of the revisions and additions to the remainder of the volume are as follows: ? Chapters 1 to 5 have each been revised to include new system and process flow diagrams@ plus new discussion content on commissioning@ building automation@ maintenance management@ sustainability/ green design@ security@ and various systems (e.g.@ underfloor air distribution@ chilled beams). ? Chapter 7@ Combined Heat and Power Systems@ formerly entitled Cogeneration Systems and Engine and Turbine Drives@ was reorganized@ as well as updated for new technology. ? Chapter 11@ District Heating and Cooling@ has new guidance on construction cost considerations@ central plants@ and distribution systems. ? Chapter 12@ Hydronic Heating and Cooling@ has revised text and figures on all aspects of system design@ including design procedure@ water temperatures@ heat transfer@ distribution losses@ constant- and variable-speed pumping@ sizing control valves@ and terminal units. ? Chapter 18@ Duct Construction@ has new guidance for installation of flexible ducts. ? Chapter 19@ Room Air Distribution Equipment@ was reorganized to coordinate with its companion chapter in HVAC Applications@ with added content on equipment for stratified and partially stratified systems. ? Chapter 24@ Mechanical Dehumidifiers and Related Components@ has new content on installation and service@ indoor pool dehumidifiers@ and application considerations for various equipment types. ? Chapter 26@ Air-Heating Coils@ has new text on installation guidelines. Chapter 27@ Unit Ventilators@ Unit Heaters@ and Makeup Air Units@ has updated content on makeup air units. ? Chapter 30@ Automatic Fuel-Burning Systems@ extensively reorganized and revised@ contains updated information on new technology and code requirements. ? Chapter 31@ Boilers@ has new material on condensing boilers@ burner types@ and operating and safety controls. ? Chapter 32@ Furnaces@ has been thoroughly revised to reflect new technology and code requirements. ? Chapter 34@ Chimney@ Vent@ and Fireplace Systems@ has been reorganized for clarity and has new content on designing fireplaces and their chimneys. ? Chapter 36@ Solar Energy Equipment@ has been reorganized and has new content on photovoltaic systems and testing ating. ? Chapter 37@ Compressors@ has been reorganized and has updates on bearings and variable-speed drive technology. Chapter 38@ Condensers@ contains revised content on air-cooled condensers@ particularly on type descriptions@ heat transfer@ pressure drop@ testing ating@ and installation and maintenance. ? Chapter 40@ Evaporative Air Cooling Equipment@ has a rewritten section on indirect coolers. ? Chapter 42@ Liquid-Chilling Systems@ has new discussion on both refrigerant selection and variable-flow chilled-water systems@ as well as new and improved figures. ? Chapter 44@ Motors@ Motor Controls@ and Variable-Speed Drives@ has updates for new technology and codes. ? Chapter 48@ Unitary Air Conditioners and Heat Pumps@ has new content on multisplit units@ variable-refrigerant-flow (VRF) equipment@ certification@ and sustainability. This volume is published@ both as a bound print volume and in electronic format on a CD-ROM@ in two editions: one using inchpound (I-P) units of measurement@ the other using the International System of Units (SI). Corrections to the 2005@ 2006@ and 2007 Handbook volumes can be found on the ASHRAE Web site at http://www.ashrae.org and in the Additions and Corrections section of this volume. Corrections for this volume will be listed in subsequent volumes and on the ASHRAE Web site. Reader comments are enthusiastically invited. To suggest improvements for a chapter@ please comment using the form on the ASHRAE Web site or@ using one of the cutout comment pages at the end of this volume's index@ write to Handbook Editor@ ASHRAE@ 1791 Tullie Circle@ Atlanta@ GA 30329@ or fax 678-539- 2187@ or e-mail mowen @ashrae.org.
信息：ICS：/ CCS：/ 发布：2008-01-01 实施：2008-07-22

GB/T 13193-1991 水质总有机碳(TOC)的测定非色散红外线吸收法
简介：本标准规定了测定地面水中总有机碳的非色散红外线吸收法。测定范围本标准适用于地面水中总有机碳的测定，测定浓度范围为0.5～60mg/L，检测下限为0.5mg/L。干扰地面水中常见共存离子超过下列含量（mg/L）时，对测定有干扰，应作适当的前处理，以消除对测定的干扰影响：SO400；Cl400；NO100；PO100；S100。水样含大颗粒悬浮物时，由于受水样注射器针孔的限制，测定结果往往不包括全部颗粒态有机碳。
信息：ICS：13.060 CCS：Z16 发布：1991-08-31 实施：1992-06-01

ASHRAE SYSTEMS AND EQUIP SI TOC-2012
简介：
信息：ICS： CCS：发布：2012-01-01 实施：

ASHRAE EQUIP SI TOC-2008 2008美国采暖,制冷与空调工程师学会HVAC系统和设备 SI版
简介：
信息：ICS： CCS：发布：2008-01-01 实施：

KS I ISO 8245-2022 水质.总有机碳（TOC）和溶解有机碳（DOC）测定指南
简介：
信息：ICS：13.060.50 CCS：发布：2022-02-15 实施：

ASHRAE SYSTEMS AND EQUIP IP TOC-2012
简介：
信息：ICS： CCS：发布：2012-01-01 实施：

AASHTO HM-28 PT II TOC-2008 运输材料标准规范及其取样检验方法.第2部分:检验
简介：
信息：ICS： CCS：发布：2008-01-01 实施：

T/QAS 053-2021 《高氯废水化学需氧量的测定 TOC测定仪法》
简介：1　范围本文件规定了高氯废水化学需氧量的测定的工作原理、试剂和材料、仪器及条件、试样方法和允许差。本文件适用于高氯废水化学需氧量在0.2mg/L～250mg/L或含氯离子浓度0～100000mg/L的水样测定。2　规范性引用文件下列文件中的内容通过文中的规范性引用而构成本文件必不可少的条款。其中，注日期的引用文件，仅该日期对应的版本适用于本文件；不注日期的引用文件，其最新版本（包括所有的修改单）适用于本文件。GB/T6682分析实验室用水规格和试验方法GB/T8170数值修约规则与极限数值的表示和判定HG/T2843化肥产品化学分析常用标准滴定溶液、标准溶液、试剂溶液和指示剂溶液3　术语下列术语定义适用于本文件。3.1　COD化学需氧量以化学方法测量水样中需要被氧化的还原性物质的量。表示水中还原性物质多少的一个指标。水中还原性物质主要是有机物。因此化学需氧量又长期作为衡量水中有机物含量的指标，化学需氧量越大说明水体受有机物污染的程度越严重。在河流污染和工业废水性质的研究以及废水处理厂的运行管理中，是一个重要的有机物污染参数。3.2　TOC总有机碳以碳的含量表示水中有机物的总量，结果以碳(C)的质量浓度(mg/L)表示。碳是一切有机物的共同成分，组成有机物的主要元素，水的TOC值越高，说明水中有机物含量越高，TOC可以作为评价水质有机物污染的指标。4　工作原理在一定的波长下，试样经微量进样器注入非分散红外吸收TOC分析仪的高温燃烧管，试样中的有机物与高纯度氧气经催化氧化生成二氧化碳，测定的二氧化碳峰面积和浓度成正比，与标准样品各COD质量数处所对应的信号响应值相对照，得到COD含量。5　试剂和材料5.1　除非另有说明，本法所用试剂均为符合分析纯，所用水为GB/T6682中一级水规格。所用溶液在没有标明配制方法时，均按HG/T2843规定配制。5.2　邻苯二甲酸氢钾（KHC8H4O4）：基准试剂；5.3　邻苯二甲酸氢钾标准溶液c（KHC8H4O4=0.00417mol/L），称取于105℃～110℃干燥至恒重的邻苯二甲酸氢钾0.4255g，溶于250ml无CO2水中，定容至500mL，摇匀。此溶液COD理论值为1000mg/L。6　仪器及条件6.1　非分散红外吸收TOC分析仪，条件参见附录A。6.2　电子天平，精度0.1mg。6.3　恒温干燥箱：温度能控制在105℃～120℃。7　试验方法7.1　样品的准备首先调整样品pH为10，静置，用微量进样器吸取上清液进行检测。7.2　工作曲线的绘制分别移取0.00m1、1.00mL、2.00mL、5.00mL、10.00mL、25.00mL邻苯二甲酸氢钾标准溶液于六个100mL容量瓶中，用水稀释至标线，摇匀。对应COD值为0.00mg/L、10.00mg/L、20.00mg/L、50.00mg/L、100.00mg/L、250.00mg/L。此溶液在2℃～8℃下可稳定保存1个月，见表1。表1　标准工作曲线溶液的制备名称　标准储备溶液　混合标准溶液　1　2　3　4　5　6COD　1mg/mL　COD浓度mg/L　0.00　10.00　20.00　50.00　100.00　250.00　　移取标准溶液体积,mL　0.00　1.00　2.00　5.00　10.00　25.00测定前，根据待测物质性能和仪器性能，进行氧气流量等测量条件优化并确定，然后用非分散红外吸收TOC分析仪在测定波长处，测定经催化燃烧生成CO2的峰面积，以各标准质量浓度为横坐标，相应的峰面积为纵坐标，绘制工作曲线。7.3　试样的测定将微量进样器用待测样品润洗3次，准确移取200μL待测样品，将试样溶液注入高温氧化炉内，在与测定标准溶液相同的条件下测定，测得的峰面积，在工作曲线上查出相应COD的质量浓度（mg/L），同时做空白试验。8　结果计算试样中化学需氧量（COD）以质量浓度W计,数值以mg/L表示，直接从仪器读出结果。测定结果应精确至小数点后两位，数值修约按GB/T8170的规定进行。9　允许差取两次重复测定结果的算术平均值作为分析结果测定，平行测定结果的绝对差值不大于0.5mg/L。AA　附　录　A（资料性）仪器测试条件非分散红外吸收TOC分析仪的参考测试条件如下：A.1氧气浓度：99.999%；A.2流量：160mL/min；A.3室温：15℃～30℃；A.4相对湿度：20%～80%；A.5燃烧室温度：750℃；A.6进样量：200μL。
信息：ICS：13.060.50 CCS：D4690 发布：2021-09-13 实施：2021-09-15

HM-31 PT IA TOC-2011
简介：INTRODUCTION PART 1 SPECIFICATIONS This Thirty-First Edition of Transportation Materials is published in two parts. Part 1 contains specifications for materials@ and Part II includes methods of testing and specifications for testing equipment. Part 1 contains 154 materials specifications and 50 Standard Practices@ of which most contain both English and Metric units of measure. Technical revisions were made in 31 of the standards since the Thirtieth Edition@ 28 standards were reconfirmed@ one standard was updated@ three new standards were added@ 15 standards were discontinued@ and nine standards were deleted. A number of specifications were included in this publication at the request of the AASHTO Subcommittee on Bridges and Structures. Many of these specifications agree with those of the American Society for Testing and Materials (ASTM). In all cases where the Association and ASTM standards are technically identical@ or substantially identical with some changes@ reference to the ASTM designation number is shown in the heading of the specification. In previous editions@ AASHTO has printed ASTM standards which have been adopted by AASHTO and given an AASHTO designation. This was done under a long-standing copyright arrangement between AASHTO and ASTM. Starting with the Thirty-First Edition@ AASHTO-approved ASTM standards are not printed. Instead@ the AASHTO specification includes the corresponding ASTM designation number and any AASHTO exception to the ASTM specification. A complete list of AASHTO specifications with corresponding ASTM standards is included following the Table of Contents. General jurisdiction over Association standards in this field rests with the AASHTO Highway Subcommittee on Materials@ which has members representing each of the 50 States@ the Commonwealth of Puerto Rico and the District of Columbia@ that constitute the Member Departments of the Association@ and the U.S. Department of Transportation. In addition@ the Subcommittee has representation from several of its Associate Members@ including the New Jersey Turnpike Authority@ the Pennsylvania Turnpike Authority@ and the Port Authority of New York and New Jersey. Also represented on the Subcommittee are most of the Association's International Associate members@ including the Canadian Provinces of New Brunswick@ the Northwest Territories@ Nova Scotia@ Ontario@ and Saskatchewan. Beginning in 1993 with the Sixteenth Edition@ material specifications and test methods are published by AASHTO each year. Annual revisions are voted upon by the Association's 52 Member Departments prior to the publication of each new edition of this book@ and if approved by at least two-thirds of the Member Departments@ they are included in the edition as standards of the Association. Comments regarding these specifications are welcomed and should be addressed to the Executive Director of AASHTO@ 444 North Capitol Street@ N.W.@ Suite 249@ Washington@ D.C. 20001. AASHTO's Web site and internet address is http://transportation.org.
信息：ICS：/ CCS：/ 发布：2011-01-01 实施：2011-08-17

ASHRAE EQUIP IP TOC-2008 2008美国采暖,制冷与空调工程师学会手册暖通空调系统和设备I-P版
简介：
信息：ICS： CCS：发布：2008-01-01 实施：

ISO 22601-2019 精细陶瓷（高级陶瓷高级工业陶瓷）.通过定量分析总有机碳（TOC）测定半导体光催化材料苯酚氧化分解性能的试验方法
简介：
信息：ICS：81.060.30 CCS：发布：2019-09-06 实施：

HM-31 PT IIA TOC-2011
简介：INTRODUCTION PART 2 METHODS OF SAMPLING AND TESTING This Thirty-First Edition of Transportation Materials is published in two parts. Part 1 contains specifications for materials@ and Part 2 includes methods of testing and specifications for testing equipment. Part 2 contains 214 test methods and equipment standards@ of which most contain both U.S. Customary and Metric units of measure. Since the Thirtieth Edition@ technical revisions were made in 39 of the standards@ 21 standards were reconfirmed@ 2 standards were updated@ 1 new standard was added@ 9 standards were discontinued@ and 2 standards were deleted. Two standards were revised in such a manner that they no longer produce a test result and therefore were reclassified as standard practices. A number of specifications were included in this publication at the request of the AASHTO Subcommittee on Bridges and Structures. Many of these standards agree with those of the American Society for Testing and Materials (ASTM). In all cases where the Association and ASTM standards are technically identical@ or substantially identical with some changes@ reference to the ASTM designation number is shown in the heading of the specification. In previous editions@ AASHTO has printed ASTM standards which have been adopted by AASHTO and given an AASHTO designation. This was done under a long-standing copyright arrangement between AASHTO and ASTM. Starting with the Thirty-First Edition@ AASHTO-approved ASTM standards are not printed. Instead@ the AASHTO specification includes the corresponding ASTM designation number and any AASHTO exception to the ASTM specification. A complete list of AASHTO specifications with corresponding ASTM standards is included following the Table of Contents. General jurisdiction over Association standards in this field rests with the AASHTO Highway Subcommittee on Materials@ which has members representing each of the 50 States@ the Commonwealth of Puerto Rico and the District of Columbia@ that constitute the Member Departments of the Association@ and the U.S. Department of Transportation. In addition@ the Subcommittee has representation from several of its Associate Members@ including the New Jersey Turnpike Authority@ the Pennsylvania Turnpike Authority@ and the Port Authority of New York and New Jersey. Also represented on the Subcommittee are most of the Association's International Associate members@ including the Canadian Provinces of New Brunswick@ the Northwest Territories@ Nova Scotia@ Ontario@ and Saskatchewan. Beginning in 1993 with the Sixteenth Edition@ material specifications and test methods are published by AASHTO each year. Annual revisions are voted upon by the Association's 52 Member Departments prior to the publication of each new edition of this book@ and if approved by at least two-thirds of the Member Departments@ they are included in the edition as standards of the Association. Comments regarding these specifications are welcomed and should be addressed to the Executive Director of AASHTO@ 444 North Capitol Street@ N.W.@ Suite 249@ Washington@ D.C. 20001. AASHTO's Web site and internet address is http://www.transportation.org.
信息：ICS：/ CCS：/ 发布：2011-01-01 实施：2011-08-17

AASHTO HM-28 PT I TOC-2008 运输材料和取样和试验方法标准规范.第1部分:规范
简介：
信息：ICS： CCS：发布：2008-01-01 实施：

ISO 20236:2018 水质.高温催化氧化燃烧后总有机碳（TOC）、溶解有机碳（DOC）、总结合态氮（TNB）和溶解结合态氮（DNB）的测定
简介：
信息：ICS：13.060.50 CCS：发布：2018-10-02 实施：

KS I ISO 8245-2010 水质.总有机碳(TOC)和溶解性有机碳(DOC)测定指南
简介：이 표준은 음용수, 지하수, 지표수, 해수 및 폐수의 TC(총 탄소), TIC(총 무기탄소
信息：ICS：13.060.50 CCS：Z16 发布：2010-11-02 实施：2010-11-02

HM-28 PT II TOC-2008
简介：
信息：ICS：/ CCS：/ 发布：2008-01-01 实施：2009-07-24

DIN 19539-2016 固体调查. 随温度变化的总碳差异(TOC400, ROC, TIC900)
简介：
信息：ICS：13.030.01;13.080.10 CCS：Z10 发布：2016-12 实施：

HM-28 PT I TOC-2008
简介：
信息：ICS：/ CCS：/ 发布：2008-01-01 实施：2009-07-24

EN 16718-2015 木材和木材为基础的产品.木材和木制品中有机碳(TOC)的总用量
简介：This European Standard describes a method for determining total organic carbon by calculating the difference between the results of measurements of total carbon (TC) and total inorganic carbon (TIC). The identification of the bio-based content given by the stable isotopes such as 13C is described also. This method is applicable to all wood species, wood-based materials (panels, plywood, wood-polymer, etc.) and woods containing chemicals in general.
信息：ICS：79.060.01 CCS：B69 发布：2015-11 实施：

KS I ISO 8245-2010(2015) 水质总有机碳（TOC）和溶解有机碳（DOC）测定导则
简介：
信息：ICS：13.060.50 CCS：发布：2010-11-02 实施：

TCVN 6634-2000 水质.有机碳(TOC)和溶解的有机碳(DOC)总量测定指南
简介：
信息：ICS： CCS：发布：2008 实施：

AASHTO HM-30 PT I TOC-2010
简介：
信息：ICS： CCS：发布：2010-01-01 实施：

KS I 3202-2007 高纯度水中的总有机碳(TOC)试验方法
简介：이 규격은 고순도 물 중의 유기질 탄소(TOC)(이하 TOC라 한다.)의 시험방법에 대하여
信息：ICS： CCS：Z16 发布：2007-06-29 实施：2007-06-29

NF X31-040-2013 污泥、处理后生物废弃物、土壤和废物.干式燃烧法测定总有机碳(TOC)
简介：
信息：ICS：13.030.01 CCS：Z04 发布：2013-01-05 实施：2013-01-05

ASHRAE REFRIGERATION IP TOC-2010 《2010 ASHRAE 手册-制冷》
简介：
信息：ICS： CCS：发布：2010-01-01 实施：

ASHRAE FUNDAMENTALS SI TOC-2013
简介：
信息：ICS： CCS：发布：2013-01-01 实施：

HM-30 PT II TOC-2010
简介：INTRODUCTION: This Thirtieth Edition of Transportation Materials is published in two parts. Part 1 contains specifications for materials@ and Part 2 includes methods of testing and specifications for testing equipment. Part 2 contains 215 test methods and equipment standards@ of which most contain both U.S. Customary and Metric units of measure. Since the Twenty-Ninth Edition@ technical revisions were made in 44 of the standards@ 22 standards were reconfirmed@ 1 standard was updated@ 2 new standards were added@ 2 standards were discontinued@ and 5 standards were deleted. A number of specifications were included in this publication at the request of the AASHTO Subcommittee on Bridges and Structures.
信息：ICS：/ CCS：/ 发布：2010-01-01 实施：2011-08-17

AASHTO HM-27 PT I TOC-2007 运输材料和抽样及试验方法的标准规范.第1部分,第27版.包括第2A和第2B部分目录
简介：This Twenty-Seventh Edition of Transportation Materials is published in two parts. Part I containsspecifications for materials, and Part II includes methods of testing and specifications for testing equipment. Part I
信息：ICS：43.020 CCS：R00 发布：2007-01-01 实施：

FUNDAMENTALS SI TOC-2013
简介：
信息：ICS：/ CCS：/ 发布：2013-01-01 实施：2014-09-06

REFRIGERATION SI TOC-2010
简介："Preface The 2010 ASHRAE Handbook??Refrigeration covers the refrigeration equipment and systems for applications other than human comfort. This book includes information on cooling@ freezing@ and storing food; industrial applications of refrigeration; and low-temperature refrigeration. Primarily a reference for the practicing engineer@ this volume is also useful for anyone involved in cooling and storage of food products. An accompanying CD-ROM contains all the volume's chapters in both I-P and SI units. This edition includes two new chapters: ? Chapter 3@ Carbon Dioxide Refrigeration Systems@ describes the history of this ""natural refrigerant"" and why it is the subject of renewed interest today. The chapter contains discussion and diagrams on CO2 refrigerant applications@ system design@ equipment@ safety@ lubricants@ commissioning@ operation@ and maintenance. ? Chapter 50@ Terminology of Refrigeration@ lists some of the common terms used in industrial refrigeration systems@ particularly systems using ammonia as the refrigerant. Also new for this volume@ chapter titles@ order@ and groupings have been revised for more logical flow and use. Some of the other revisions and additions are as follows: ? Chapter 2@ Ammonia Refrigeration Systems@ has added guidance on avoiding hydraulic shock@ on purging water and noncondensables@ as well as on hot-gas defrost and defrost control. ? Chapter 6@ Refrigerant System Chemistry@ has added information on polyvinyl ether (PVE) lubricants and corrosion@ plus updates for recent ASHRAE research on copper plating and material compatibility. ? Chapter 8@ Equipment and System Dehydrating@ Charging@ and Testing@ has new table data on dehydration and moisture-measuring methods and a revised section on performance testing. ? Chapter 9@ Refrigerant Containment@ Recovery@ Recycling@ and Reclamation@ has added a new table comparing sensitivities of various leak-detection methods and a procedure for receiver level monitoring. ? Chapter 11@ Refrigerant-Control Devices@ has updated information on electric expansion valves and discharge bypass valves@ plus revised figures on thermostatic expansion valves (TXVs) and several revised examples. ? Chapter 12@ Lubricants in Refrigerant Systems@ has new content on pressure/viscosity coefficients@ compressibility factors@ and lubricants' effects on system performance. ? Chapter 17@ Household Refrigerators and Freezers@ has been reorganized and updated for revised standards and new component technologies@ including variable-speed and linear compressors@ and has information on new configurations and functions@ such as wine cooling units@ rapid-chill/freeze/thaw@ and odor elimination. The section on performance evaluation has been revised and integrated with the section on standards. ? Chapter 25@ Cargo Containers@ Rail Cars@ Trailers@ and Trucks@ has been updated with information on multitemperature compartments and air curtains. ? Chapter 38@ Fruit Juice Concentrates and Chilled Juice Products@ has added description of storage tank sterilization. ? Chapter 44@ Ice Rinks@ has extensive changes to the section on heat recovery and updated loads information based on ASHRAE research project RP-128. This volume is published@ both as a bound print volume and in electronic format on a CD-ROM@ in two editions: one using inchpound (I-P) units of measurement@ the other using the International System of Units (SI). Corrections to the 2007@ 2008@ and 2009 Handbook volumes can be found on the ASHRAE Web site at http://www.ashrae.org and in the Additions and Corrections section of this volume. Corrections for this volume will be listed in subsequent volumes and on the ASHRAE Web site."
信息：ICS：/ CCS：/ 发布：2010-01-01 实施：2010-08-05

HM-27 PT I TOC-2007
简介：
信息：ICS：/ CCS：/ 发布：2007-01-01 实施：2008-07-17

ASHRAE FUNDAMENTALS IP TOC-2013
简介：
信息：ICS： CCS：发布：2013-01-01 实施：

REFRIGERATION IP TOC-2010
简介："Preface The 2010 ASHRAE Handbook??Refrigeration covers the refrigeration equipment and systems for applications other than human comfort. This book includes information on cooling@ freezing@ and storing food; industrial applications of refrigeration; and low-temperature refrigeration. Primarily a reference for the practicing engineer@ this volume is also useful for anyone involved in cooling and storage of food products. An accompanying CD-ROM contains all the volume's chapters in both I-P and SI units. This edition includes two new chapters: ? Chapter 3@ Carbon Dioxide Refrigeration Systems@ describes the history of this ""natural refrigerant"" and why it is the subject of renewed interest today. The chapter contains discussion and diagrams on CO2 refrigerant applications@ system design@ equipment@ safety@ lubricants@ commissioning@ operation@ and maintenance. ? Chapter 50@ Terminology of Refrigeration@ lists some of the common terms used in industrial refrigeration systems@ particularly systems using ammonia as the refrigerant. Also new for this volume@ chapter titles@ order@ and groupings have been revised for more logical flow and use. Some of the other revisions and additions are as follows: ? Chapter 2@ Ammonia Refrigeration Systems@ has added guidance on avoiding hydraulic shock@ on purging water and noncondensables@ as well as on hot-gas defrost and defrost control. ? Chapter 6@ Refrigerant System Chemistry@ has added information on polyvinyl ether (PVE) lubricants and corrosion@ plus updates for recent ASHRAE research on copper plating and material compatibility. ? Chapter 8@ Equipment and System Dehydrating@ Charging@ and Testing@ has new table data on dehydration and moisture-measuring methods and a revised section on performance testing. ? Chapter 9@ Refrigerant Containment@ Recovery@ Recycling@ and Reclamation@ has added a new table comparing sensitivities of various leak-detection methods and a procedure for receiver level monitoring. ? Chapter 11@ Refrigerant-Control Devices@ has updated information on electric expansion valves and discharge bypass valves@ plus revised figures on thermostatic expansion valves (TXVs) and several revised examples. ? Chapter 12@ Lubricants in Refrigerant Systems@ has new content on pressure/viscosity coefficients@ compressibility factors@ and lubricants' effects on system performance. ? Chapter 17@ Household Refrigerators and Freezers@ has been reorganized and updated for revised standards and new component technologies@ including variable-speed and linear compressors@ and has information on new configurations and functions@ such as wine cooling units@ rapid-chill/freeze/thaw@ and odor elimination. The section on performance evaluation has been revised and integrated with the section on standards. ? Chapter 25@ Cargo Containers@ Rail Cars@ Trailers@ and Trucks@ has been updated with information on multitemperature compartments and air curtains. ? Chapter 38@ Fruit Juice Concentrates and Chilled Juice Products@ has added description of storage tank sterilization. ? Chapter 44@ Ice Rinks@ has extensive changes to the section on heat recovery and updated loads information based on ASHRAE research project RP-1289. This volume is published@ both as a bound print volume and in electronic format on a CD-ROM@ in two editions: one using inchpound (I-P) units of measurement@ the other using the International System of Units (SI). Corrections to the 2007@ 2008@ and 2009 Handbook volumes can be found on the ASHRAE Web site at http://www.ashrae.org and in the Additions and Corrections section of this volume. Corrections for this volume will be listed in subsequent volumes and on the ASHRAE Web site."
信息：ICS：/ CCS：/ 发布：2010-01-01 实施：2010-08-05

AASHTO HDG TOC-2007 公路排水指南.第4版
简介：American Association of StateHighway and Transportation Officials444 North Capitol Street, N.W., Suite 249Washington, DC 20001(202) 624-5800www.transportation.org
信息：ICS：43.080.01 CCS：R10 发布：2007-01-01 实施：

DIN EN 15936-2012 污泥,处理后生物废料,土壤和废弃物.干式燃烧法测定总有机碳(TOC).德文版本EN 15936-2012
简介：
信息：ICS：13.030.01 CCS：Z12 发布：2012-11 实施：

AASHTO HM-30 PT II TOC-2010
简介：
信息：ICS： CCS：发布：2010-01-01 实施：

AASHTO HM-27 PT II TOC-2007 运输材料和抽样及试验方法的标准规范.第2部分,第27版.包括第2A和第2B部分目录
简介：This Twenty-Seventh Edition of Transportation Materials is published in two parts. Part I containsspecifications for materials, and Part II includes methods of testing and specifications for testing equipment.
信息：ICS：43.020 CCS：R00 发布：2007-01-01 实施：

EN 15936-2012 污泥,生物废物处理,土壤和废物总量的测定.有机碳(TOC)干燥燃烧
简介：This European Standard specifies two methods for the determination of total organic carbon (TOC) in sludge, treated biowaste, soil, waste and sediment samples containing more than 1 g carbon per kg of dry matter (0,1 %). For sludge, treated biowaste and soil only Method A is validated.
信息：ICS：13.030.01 CCS：发布：2012-08-01 实施：

HM-30 PT I TOC-2010
简介：INTRODUCTION This Thirtieth Edition of Transportation Materials is published in two parts. Part 1 contains specifications for materials@ and Part II includes methods of testing and specifications for testing equipment. Part 1 contains 162 materials specifications and 48 Standard Practices@ of which most contain both English and Metric units of measure. Technical revisions were made in 26 of the standards since the Twenty-Ninth Edition@ 14 standards were reconfirmed@ six standards were updated@ eight new standards were added@ nine standards were discontinued@ and one standard was deleted. A number of specifications were included in this publication at the request of the AASHTO Subcommittee on Bridges and Structures. Many of these specifications agree with those of the American Society for Testing and Materials (ASTM). In all cases where the Association and ASTM standards are technically identical@ or substantially identical with some changes@ reference to the ASTM designation number is shown in the heading of the specification. In past editions@ AASHTO has printed ASTM standards which have been adopted by AASHTO and given an AASHTO designation. This was done under a long-standing copyright arrangement between AASHTO and ASTM. The Thirtieth Edition includes 32 AASHTO-approved ASTM specifications. These specifications appear in this edition as the actual ASTM specification preceded by a cover page with the AASHTO designation number. Any AASHTO exception to the ASTM specification is indicated on this cover page. The numerical order of the specifications has been retained. A list of the affected AASHTO specifications is included following the Table of Contents. General jurisdiction over Association standards in this field rests with the AASHTO Highway Subcommittee on Materials@ which has members representing each of the 50 States@ the Commonwealth of Puerto Rico and the District of Columbia@ that constitute the Member Departments of the Association@ and the U.S. Department of Transportation. In addition@ the Subcommittee has representation from several of its Associate Members@ including the New Jersey Turnpike Authority@ the Pennsylvania Turnpike Authority@ and the Port Authority of New York and New Jersey. Also represented on the Subcommittee are most of the Association's International Associate members@ including the Canadian Provinces of New Brunswick@ the Northwest Territories@ Nova Scotia@ Ontario@ and Saskatchewan. Beginning in 1993 with the Sixteenth Edition@ material specifications and test methods are published by AASHTO each year. Annual revisions are voted upon by the Association's 52 Member Departments prior to the publication of each new edition of this book@ and if approved by at least two-thirds of the Member Departments@ they are included in the edition as standards of the Association. Comments regarding these specifications are welcomed and should be addressed to the Executive Director of AASHTO@ 444 North Capitol Street@ N.W.@ Suite 249@ Washington@ D.C. 20001. AASHTO's Web site and Internet address is http://transportation.org.
信息：ICS：/ CCS：/ 发布：2010-01-01 实施：2011-08-17

HDG TOC-2007
简介：Foreword: The Highway Subcommittee on Design@ as part of its charge@ prepares and keeps current publications pertaining to principles@ methods@ and procedures of roadway design@ including practices to protect and to enhance the quality of the environment. As the subject of highway drainage is important to many disciplines and many phases of highway engineering@ the Subcommittee requested and received approval from the Standing Committee on Highways to establish a task force to prepare needed publications on the subject of highway drainage. Consequently@ the Task Force on Hydrology and Hydraulics was established and first met in February 1970@ developed a statement of purpose@ and outlined a program of activity. The purpose of the Task Force is to assist the Subcommittee in developing guidelines and in formulating policy for highway disciplines@ giving due consideration to safety and the environment. Pursuant to this purpose@ the Task Force on Hydrology and Hydraulics began the preparation of guidelines covering topics on major areas of highway hydraulic design. To the extent practicable@ each Guideline is a stand-alone volume@ but reference to other guidelines in the series is utilized to avoid unnecessary repetition. Since these Guidelines are intended to provide an overview@ discussion@ and design philosophy for each of the covered topics@ technical information is kept to a minimum by making reference to appropriate publications and to the AASHTO Model Drainage Manual which contains recommended design policy@ criteria@ procedures@ aids and example problems. The following Guidelines were originally published as separate volumes: I@ II and III in 1973@ IV in 1975@ V in 1977@ and VII in 1982. Consolidated editions were published in 1973 of I?CIII@ in 1975 of I?CIV@ in 1979 of I?CVI@ in 1982 of I?CVII@ and in 1987 of I?CVIII which was also printed in the current loose-leaf format. The 1992 edition of the Guidelines contains rewritten Volumes I?CIII@ updated volumes IV?CVIII@ and new volumes IX@ X@ and a Glossary. A new@ separate Volume XI was published in 1994. The 1999 edition of the Guidelines is a metric conversion of the 1992 edition and also contains new Guidelines@ Volumes XI@ XII@ XIII@ and XIV@ which are in metric format. This 2007 Edition contains both metric (SI) and U.S. Customary units@ replaces the Volume designations with Chapter designations@ and contains a new Guideline@ Chapter 15. The Highway Subcommittee on Design gratefully acknowledges the efforts of members of the Task Force on Hydrology and Hydraulics in preparing the Guidelines and the cooperation of the States participating in this endeavor.
信息：ICS：/ CCS：/ 发布：2007-01-01 实施：2007-04-17

ASHRAE HVAC SYSTEMS AND EQUIPMENT IP TOC-2012
简介：
信息：ICS： CCS：发布：2012-01-01 实施：

HM-29 PT II TOC-2009
简介：
信息：ICS：/ CCS：/ 发布：2009-01-01 实施：2010-09-15

HM-27 PT II TOC-2007
简介：
信息：ICS：/ CCS：/ 发布：2007-01-01 实施：2009-07-24

ASHRAE SYSTEMS AND EQUIP IP TOC-2012
简介：
信息：ICS： CCS：发布：2012-01-01 实施：

HM-29 PT I TOC-2009
简介：INTRODUCTION PART 1 SPECIFICATIONS This Twenty-Ninth Edition of Transportation Materials is published in two parts. Part 1 contains specifications for materials@ and Part II includes methods of testing and specifications for testing equipment. Part 1 contains 162 materials specifications and 41 Standard Practices@ of which most contain both English and Metric units of measure. Technical revisions were made in 39 of the standards since the Twenty-Eighth Edition@ 36 standards were reconfirmed@ three new standards were added@ one standard was discontinued@ and three standards were deleted. A number of specifications were included in this publication at the request of the AASHTO Subcommittee on Bridges and Structures. Many of these specifications agree with those of the American Society for Testing and Materials (ASTM). In all cases where the Association and ASTM standards are technically identical@ or substantially identical with some changes@ reference to the ASTM designation number is shown in the heading of the specification. In past editions@ AASHTO has printed ASTM standards which have been adopted by AASHTO and given an AASHTO designation. This was done under a long-standing copyright arrangement between AASHTO and ASTM. The Twenty-Ninth Edition includes 42 AASHTO-approved ASTM specifications. These specifications appear in this edition as the actual ASTM specification preceded by a cover page with the AASHTO designation number. Any AASHTO exception to the ASTM specification is indicated on this cover page. The numerical order of the specifications has been retained. A list of the affected AASHTO specifications is included following the Table of Contents. General jurisdiction over Association standards in this field rests with the AASHTO Highway Subcommittee on Materials@ which has members representing each of the 50 States@ the Commonwealth of Puerto Rico and the District of Columbia@ that constitute the Member Departments of the Association@ and the U.S. Department of Transportation. In addition@ the Subcommittee has representation from several of its Associate Members@ including the New Jersey Turnpike Authority@ the Pennsylvania Turnpike Authority@ and the Port Authority of New York and New Jersey. Also represented on the Subcommittee are most of the Association's International Associate members@ including the Canadian Provinces of New Brunswick@ the Northwest Territories@ Nova Scotia@ Ontario@ and Saskatchewan. Beginning in 1993 with the Sixteenth Edition@ material specifications and test methods are published by AASHTO each year. Annual revisions are voted upon by the Association's 52 Member Departments prior to the publication of each new edition of this book@ and if approved by at least two-thirds of the Member Departments@ they are included in the edition as standards of the Association. Comments regarding these specifications are welcomed and should be addressed to the Executive Director of AASHTO@ 444 North Capitol Street@ N.W.@ Suite 249@ Washington@ D.C. 20001. AASHTO's Web site and internet address is http://transportation.org.
信息：ICS：/ CCS：/ 发布：2009-01-01 实施：2010-09-15

HM-26 PT II TOC-2006
简介：
信息：ICS：/ CCS：/ 发布：2006-01-01 实施：2009-07-24

ASHRAE SYSTEMS AND EQUIP SI TOC-2012
简介：
信息：ICS： CCS：发布：2012-01-01 实施：

FUNDAMENTALS IP TOC-2009
简介：The 2009 ASHRAE Handbook??Fundamentals covers basic principles and data used in the HVACR industry. The ASHRAE Technical Committees that prepare these chapters strive not only to provide new information@ but also to clarify existing information@ delete obsolete materials@ and reorganize chapters to make the Handbook more understandable and easier to use. An accompanying CDROM contains all the volume's chapters in both I-P and SI units. This edition includes a new chapter (35)@ Sustainability@ which defines this concept for HVACR and describes the principles@ design considerations@ and detailed evaluations needed in designing sustainable HVACR systems. Also new for this volume@ chapter order and groupings have been revised for more logical flow and use. Some of the other revisions and additions to the volume are as follows: ? Chapter 1@ Psychrometrics@ has new information on the composition of dry air@ and revised table data for thermodynamic properties of water and moist air. ? Chapter 6@ Mass Transfer@ has added examples on evaluating diffusion coefficients@ and on heat transfer and moisture removal rates. ? Chapter 7@ Fundamentals of Control@ includes new content on dampers@ adaptive control@ direct digital control (DDC) system architecture and specifications@ and wireless control. ? Chapter 9@ Thermal Comfort@ has a new section on thermal comfort and task performance@ based on multiple new studies done in laboratory and office environments. ? Chapter 10@ Indoor Environmental Health@ was reorganized to describe hazard sources@ health effects@ exposure standards@ and exposure controls. New and updated topics include mold@ Legionella@ indoor air chemistry@ thermal impacts@ and water quality standards. ? Chapter 14@ Climatic Design Information@ has new climate data for 5564 stations (an increase of 1142 new stations compared to 2005 Fundamentals) on the CD-ROM accompanying this book. A subset of data for selected stations is also included in the printed chapter for convenient access. ? Chapter 15@ Fenestration@ has been revised to include new examples of solar heat gain coefficient (SHGC) calculations@ and new research results on shading calculations and U-factors for various specialized door types. ? Chapter 16@ Ventilation and Infiltration@ has new@ detailed examples@ updates from ASHRAE Standards 62.1 and 62.2@ discussion of relevant LEED? aspects@ and new information on airtightness and ventilation rates for commercial buildings. ? Chapter 18@ Nonresidential Cooling and Heating Load Calculations@ has been updated to reflect new ASHRAE research results on climate data and on heat gains from office equipment@ lighting@ and commercial cooking appliances. ? Chapter 20@ Space Air Diffusion@ has been completely rewritten to harmonize with related chapters in other volumes@ with major sections on fully mixed@ partially mixed@ stratified@ and task/ambient systems and the principles behind their design and operation. ? Chapter 21@ Duct Design@ has new data for round and rectangular fittings in agreement with the ASHRAE Duct Fitting Database@ as well as new content on duct leakage requirements@ spiral duct roughness@ and flexible duct pressure loss correction. ? Chapter 23@ Insulation for Mechanical Systems@ has added tables from ASHRAE Standard 90.1-2007@ and a new section on writing specifications. ? Chapter 24@ Airflow Around Buildings@ has added a detailed discussion on computational evaluation of airflow@ plus new references including updated versions of design standards and manuals of practice. ? Chapters 25@ 26@ and 27 carry new titles@ reorganized as chapters on Heat@ Air@ and Moisture Control Fundamentals@ Material Properties@ and Examples@ respectively@ with updated content throughout. ? Chapter 29@ Refrigerants@ has new content on stratospheric ozone depletion@ global climate change@ and global environmental characteristics of refrigerants. ? Chapter 30@ Thermophysical Properties of Refrigerants@ has updated data for R-125@ R-245fa@ R-170@ R-290@ R-600@ and R-600a. ? Chapter 36@ Measurement and Instruments@ has revised content on measurement of air velocity@ infiltration@ airtightness@ and outdoor air ventilation@ plus new information on particle image velocimetry (PIV) and data acquisition and recording. This volume is published@ both as a bound print volume and in electronic format on a CD-ROM@ in two editions: one using inchpound (I-P) units of measurement@ the other using the International System of Units (SI). Corrections to the 2006@ 2007@ and 2008 Handbook volumes can be found on the ASHRAE Web site at http://www.ashrae.org and in the Additions and Corrections section of this volume. Corrections for this volume will be listed in subsequent volumes and on the ASHRAE Web site.
信息：ICS：/ CCS：/ 发布：2009-01-01 实施：2014-09-06

HM-26 PT I TOC-2006
简介：
信息：ICS：/ CCS：/ 发布：2006-01-01 实施：2007-07-27

ASHRAE HVAC SYSTEMS AND EQUIPMENT SI TOC-2012
简介：
信息：ICS： CCS：发布：2012-01-01 实施：

FUNDAMENTALS SI TOC-2009
简介：The 2005 ASHRAE Handbook??Fundamentals covers basic principles and data used in the HVACR industry. Research sponsored by ASHRAE and others continues to generate new information to support the HVACR technology that has improved the quality of life worldwide. The ASHRAE Technical Committees that prepare these chapters strive not only to provide new information@ but also to clarify existing information@ delete obsolete materials@ and reorganize chapters to make the Handbook more understandable and easier to use.
信息：ICS：/ CCS：/ 发布：2009-01-01 实施：2014-09-06

HM-25 PT II TOC-2005
简介：
信息：ICS：/ CCS：/ 发布：2005-01-01 实施：2009-07-24