实验室气体检测标准实验室气体-中析研究所检测

(CMA)

(CNAS)

(ISO)

(高新技术企业)

实验室气体相关标准参考信息

KS B ISO 15011-4-2022 焊接和相关工艺的健康和安全.烟雾和气体取样的实验室方法.第4部分:烟雾数据表
简介：
信息：ICS： CCS：发布：2022-12-19 实施：

ISO 19703-2010 燃烧中有毒气体的生成和分析.实验室燃烧中物质产生、当量比和燃烧效率的计算
简介：This International Standard provides definitions and equations for the calculation of toxic product yields andthe fire conditions under which they have been derived in terms of equivalence ratio and combustion efficiency.Sample calculations for practical cases are provided. The methods can be used to produce eitherinstantaneous or averaged values for those experimental fires in which time-resolved data are available.
信息：ICS：13.220.01 CCS：C80 发布：2010-06 实施：

ISO 15011-4 AMD 1-2008 焊接和相关工艺中的健康和安全.烟尘和气体取样用实验室方法.第4部分:烟尘数据单.修改件1
简介：
信息：ICS：13.040.30;25.160.10 CCS：C70 发布：2008-12 实施：

T/CIQA 33-2022 实验室气体输送系统技术规范
简介：
信息：ICS：91.140.40 CCS：发布：2022-03-09 实施：2022-03-09

DIN EN ISO 15011-3-2010 焊接和相关工艺的健康和安全.烟和气体取样的实验室法.第3部分:电弧焊时臭氧排放率的测定 (ISO 15011-3-2009); 德文版本 EN ISO 15011-3-2009
简介：This International standard defines a laboratory method for measuring the emission rate of ozone, during arc welding, using a hood technique. The methodology is directed primarily at measuring ozone emission rate when using gas-shielded arc welding processes but it can also be employed with other processes e. g. selfshielded tubular-cored arc welding, providing that welding can be performed automatically under the hood. Emission rate testing can be used to evaluate the effects of welding parameters, processes, shielding gases, consumable wires etc on ozone emission rate and hence to predict, qualitatively, relative changes in exposure that will occur under the same work situations. Absolute exposure values are dependent upon other factors such as welder position with respect to the plume and draughts and cannot be predicted from emission rate values.
信息：ICS：13.040.30;25.160.10 CCS：C70 发布：2010-03 实施：

KS B ISO 15011-4-2007(2017) 焊接及相关工艺的健康和安全烟雾和气体取样的实验室方法第4部分:烟雾数据表
简介：
信息：ICS： CCS：发布：2007-11-30 实施：

T/CIQA 33-2022 实验室气体输送系统技术规范
简介：（1）钢瓶等压缩气体在实验室大楼内的储存使用要求；（2）钢瓶等压缩气体集中存放的技术安全要求；（3）气瓶间的技术要求，避免不易操作，不安全，不易管理；（4）管路长距离输送的技术要求规范；（5）实验室内气体使用点的技术要求规范；（6）特殊气体的监测控制技术要求；（7）管道阀门的选型﹑施工的技术要求；（8）系统检测测试验收的技术要求；
信息：ICS：91.140.40 CCS：E492 发布：2022-03-09 实施：2022-04-11

DIN EN ISO 15011-1-2010 焊接和相关工艺中的健康和安全.烟尘和气体的实验室取样方法.第1部分:电弧焊产生的烟尘排放率测定和烟尘采集分析(ISO 15011-1-2009); 德文版本 EN ISO 15011-1-2009
简介：This part of European Standard describes a method for the determination of particulate fume emission rate from arc welding processes using a fume box technique. It defines a method of sampling particulate fume for chemical analysis and suggests possible analytical techniques.
信息：ICS：13.040.30;25.160.10 CCS：C70 发布：2010-03 实施：

KS B ISO 15011-4-2007 焊接和相关工艺的安全和保健.烟尘和气体取样的实验室方法.第4部分:烟尘数据单
简介：이 규격은 용접 및 관련공정에서의 안전과 보건에 적용된다. 이 규격은 퓸 데이터 시트를 작
信息：ICS：13.100;25.160.10 CCS：J64 发布：2007-11-30 实施：2007-11-30

KS B ISO 15011-1-2019 焊接和相关工艺中的健康与安全 - 烟气和气体取样实验室方法 - 第1部分:电弧焊接和烟气收集分析中烟气排放率的测定
简介：
信息：ICS： CCS：发布：2019-03-25 实施：

DIN EN ISO 15011-2-2010 焊接和相关工艺中的健康和安全.烟尘和气体取样的实验室方法.第2部分:在电弧焊、切削加工和刨削槽时，一氧化碳(CO),二氧化碳(CO₂),氧化氮(NO)和二氧化氮(NO₂)排放率的测定
简介：This standard provides guidance of the determination of emission rates of gases and organic vapours generated by arc welding using a fume box technique. It describes the test principle, gives a possible fume box arrangement and consider methods for sampling and analysis. The following gases and organic vapour which can be produced during arc welding are covered:carbon monoxide(CO); Carbon dioxide(CO2); Nitrogen oxide(NO); Nitrogen dioxide(NO2); Organic vapours produced in the arc welding of coated metals, e. g. primed, painted or plastic coated material.
信息：ICS：13.040.30;25.160.10 CCS：C70 发布：2010-03 实施：

BS ISO 19703-2018 燃烧中有毒气体的生成和分析.实验室燃烧中物质产生、当量比和燃烧效率的计算
简介：
信息：ICS：13.220.01 CCS：C80 发布：2018-06-21 实施：2018-06-21

GOST R 8.729-2010 国家测量一致性体系.分析气体实验室色谱法.验证方法
简介：
信息：ICS：17.020;17.140.30;17.180.30 CCS：发布：2010 实施：2012-01-01

BS ISO 19703-2006 毒性气体生成和分析.实验室燃烧中物质生成、当量比和燃烧效率的计算
简介：ISO 19703:2005 provides definitions and equations for the calculation of toxic product yields and the fire conditions under which they have been derived in terms of equivalence ratio and combustion efficiency. Sample calculations for practical cases are provided. The methods can be used to produce either instantaneous or averaged values for those experimental fires in which time-resolved data are available.ISO 19703:2005 is intended to provide guidance to fire researchers in the recording of appropriate experimental fire data, the calculation of average yields of gases and smoke in fire effluents in fire tests and fire-like combustion in reduced scale apparatus, and the characterization of burning behaviour in experimental fires in terms of equivalence ratio and combustion efficiency using oxygen consumption and product generation data.ISO 19703:2005 does not provide guidance on the operating procedure of any particular piece of apparatus or interpretation of data obtained therein (e.g. toxicological significance of results).
信息：ICS：13.220.01 CCS：C80 发布：2006-07-31 实施：2006-07-31

ISO 19703-2018 燃烧中有毒气体的生成和分析.实验室燃烧中物质产生、当量比和燃烧效率的计算
简介：
信息：ICS：13.220.01 CCS：C80 发布：2018-0601 实施：

BS EN ISO 15011-1-2009 焊接和相关工艺中的健康和安全.烟尘和气体的实验室取样方法.电弧焊产生的烟尘排放率测定和烟尘采集分析
简介：This part of ISO 15011 defines a laboratory method for measuring the emission rate of fume from arc welding.It also defines a method of collecting the fume for subsequent analysis and refers to suitable analytical techniques. The methods described are suitable for use with all open arc welding processes except tungsten inert gas (TIG) welding, which produces little fume.The emission rate method can be used to evaluate the effects of welding electrodes and wires, weldingparameters, processes, shielding gases, test piece composition and test piece surface condition on fumeemission rate. Following analysis of the fume collected, the effects of test parameters on fume composition can also be determined.
信息：ICS：13.040.30;25.160.10 CCS：J33 发布：2009-11-30 实施：2009-11-30

BS EN ISO 15011-4-2006+A1-2008 焊接和相关工艺的卫生和安全性.烟雾和气体采样的实验室方法.第4部分:烟雾数据单
简介：This part of ISO 15011 covers health and safety in welding and allied processes. It specifies requirements fordetermination of the emission rate and chemical composition of welding fume in order to prepare fume datasheets.It applies to all filler materials used for joining or surfacing by arc welding using a manual, partly mechanisedor fully automatic process, depositing unalloyed steel, alloyed steel and non-ferrous alloys. Manual metal arcwelding, gas-shielded metal arc welding with solid wires, metal-cored and flux-cored wires and arc weldingwith self-shielded flux-cored wires are included within the scope of this part of ISO 15011.
信息：ICS：13.100;25.160.01;25.160.10 CCS：J33 发布：2006-03-31 实施：2006-03-31

BS EN ISO 15011-4-2018 焊接和相关工艺的卫生和安全性.烟雾和气体采样的实验室方法.第4部分:烟雾数据单
简介：
信息：ICS：13.040.30;13.100;25.160.10 CCS：J33 发布：2018-03-06 实施：2018-03-06

BS EN ISO 15011-2-2009 焊接和相关工艺中的健康和安全.对电弧焊产生的烟尘和气体取样的实验室方法.在电弧焊、切削加工和刨削槽时，一氧化碳(CO)、二氧化碳(CO₂)、氧化氮(NO)和二氧化氮(NO₂)排放率的测定
简介：This part of ISO 15011 defines laboratory methods for measuring the emission rates of carbon monoxide(CO), carbon dioxide (CO2), nitrogen monoxide (NO) and nitrogen dioxide (NO2) generated during arcwelding, cutting and gouging, using a hood technique. The methodology is suitable for use with all open arc welding processes, cutting and gouging but different designs of hood are used depending on the process and whether or not it can be conducted automatically.The method can be used to evaluate the effects of welding wires, welding parameters, processes, shielding gases, test piece composition and test piece surface condition on emission rate.
信息：ICS：13.040.30;25.160.10 CCS：J33 发布：2009-11-30 实施：2009-11-30

ISO 15011-4:2006 焊接和相关工艺的健康与安全——烟雾和气体取样的实验室方法第4部分:烟雾数据表
简介：
信息：ICS：13.100 CCS：发布：2006-03-17 实施：

ISO 15011-4-2017 焊接和相关工艺中的健康和安全 - 烟气和气体取样实验室方法 - 第4部分:烟雾数据表
简介：
信息：ICS：13.100 CCS：发布：2017-12-08 实施：

BS EN ISO 15011-3-2009 焊接和相关工艺的健康和安全.烟和气体取样的实验室法.电弧焊时臭氧排放率的测定
简介：This part of ISO 15011 defines a laboratory method for measuring the emission rate of ozone during arcwelding, using a hood technique. The method is directed primarily at measuring ozone emission rate when using gas-shielded arc welding processes, but it can also be employed with other processes, e.g. selfshielded flux-cored arc welding, provided that welding can be performed automatically under the hood.The method can be used to evaluate the effects of welding wires, welding parameters, processes, shielding gases, test piece composition and test piece surface condition on emission rate.
信息：ICS：13.040.30;25.160.10 CCS：J33 发布：2009-11-30 实施：2009-11-30

ISO/TS 15011-5:2006 焊接和相关工艺中的健康和安全.烟雾和气体取样的实验室方法.第5部分:焊接或切割全部或部分由有机材料组成的产品时产生的热降解产物的识别
简介：
信息：ICS：13.100 CCS：发布：2006-03-10 实施：

ISO 15011-4:2017 焊接和相关工艺中的健康和安全 - 烟气和气体取样实验室方法 - 第4部分:烟雾数据表
简介：
信息：ICS：13.100 CCS：发布：2017-12-08 实施：

ISO 15011-3:2009 焊接和相关工艺的健康与安全——烟雾和气体取样的实验室方法第3部分:弧焊期间臭氧排放率的测定
简介：
信息：ICS：13.100 CCS：发布：2009-10-05 实施：

EN ISO 15011-4-2006 焊接和相关工艺的卫生和安全.烟尘和气体取样的实验室方法.第4部分:烟尘数据单.包含修改件A1-2008
简介：This part of ISO 15011 covers health and safety in welding and allied processes. It specifies requirements fordetermination of the emission rate and chemical composition of welding fume in order to prepare fume datasheets.
信息：ICS：13.100;25.160.10 CCS：发布：2006-03-01 实施：

GOST 8.616-2013 确保测量一致性的国家系统. 用于控制液化烃燃料气体组成成分的实验室和流色谱仪. 验证方法
简介：
信息：ICS：17.020;17.040.30 CCS：发布：2013 实施：2015-02-01

ISO 15011-2:2009 焊接和相关工艺的健康与安全——烟雾和气体取样的实验室方法第2部分:电弧焊、切割和气刨过程中一氧化碳（CO）、二氧化碳（CO2）、一氧化氮（NO）和二氧化氮（NO2）排放率的测定
简介：
信息：ICS：13.100 CCS：发布：2009-10-05 实施：

ISO 15011-4-2006 焊接和相关工艺的卫生和安全.烟尘和气体取样的实验室方法.第4部分:烟尘数据单
简介：This part of ISO 15011 covers health and safety in welding and allied processes. It specifies requirements for determination of the emission rate and chemical composition of welding fume in order to prepare fume data sheets.It applies to all filler materials used for joining or surfacing by arc welding using a manual, partly mechanised or fully automatic process, depositing unalloyed steel, alloyed steel and non-ferrous alloys. Manual metal arc welding, gas-shielded metal arc welding with solid wires, metal-cored and flux-cored wires and arc welding with self-shielded flux-cored wires are included within the scope of this part of ISO 15011.
信息：ICS：13.040.30;25.160.10 CCS：J33 发布：2006-03 实施：

ISO/TS 15011-6 Technical Corrigendum 1-2012 焊接和相关工艺的卫生和安全性.烟尘和气体取样的实验室法.第6部分:来自电阻焊点的烟尘和气体定量测定规程.技术勘误表1
简介：
信息：ICS：13.100;25.160.10 CCS：J33 发布：2012-09 实施：

ISO 15011-1:2009 焊接和相关工艺的健康与安全——烟雾和气体取样的实验室方法第1部分:弧焊期间烟雾排放率的测定和分析用烟雾的收集
简介：
信息：ICS：13.100 CCS：发布：2009-10-05 实施：

ISO/TS 15011-5-2006 焊接和相关工艺的卫生和安全.烟尘和气体取样的实验室法.第5部分:完全或部分有机材料组成的产品在焊接或切割时产生的热降解产品的识别
简介：ISO/TS 15011-5:2006 specifies procedures for obtaining information about thermal degradation products generated when welding, cutting through, preheating and straightening products composed wholly or partly of organic substances, e.g. shop primers, paints, adhesives, waxes, sealants, pressing lubricant, oils, etc. It is aimed primarily at test laboratories performing such procedures. The data generated may be used by product manufacturers to provide information for inclusion in safety data sheets and by occupational hygienists to identify thermal degradation products of significance in the performance of risk assessments and/or workplace exposure measurements. The data cannot be used to estimate workplace exposure directly.ISO/TS 15011-5:2006 is applicable to all products composed partly or wholly of organic materials that could be heated, during welding and cutting, to temperatures at which thermal degradation products are generated and where it is not apparent what those degradation products will be.
信息：ICS：13.040.30;13.100;25.160.01 CCS：J33 发布：2006-03 实施：

ISO/TS 15011-6 CORR 1-2012 焊接和相关工艺的卫生和安全性.烟尘和气体取样的实验室法.第6部分:来自电阻焊点的烟尘和气体定量测定规程.技术勘误表1
简介：
信息：ICS：13.100;25.160.10 CCS：J33 发布：2012-09 实施：

ISO 15011-3-2009 焊接和相关工艺的健康和安全.烟和气体取样的实验室法.第3部分:电弧焊时臭氧排放率的测定
简介：
信息：ICS：13.040.30;13.100;25.160.10 CCS：J33 发布：2009-10 实施：

ASHRAE QC-06-038-2006 全面的,管内气体的空气净化器的实验室测试
简介：Laboratory Testing of Full-Scale In-Duct Gas Air Cleaners
信息：ICS：97.080 CCS：Y62 发布：2006-01-01 实施：

ISO/TS 15011-6:2012 焊接和相关工艺的健康与安全——烟雾和气体取样的实验室方法第6部分:电阻点焊烟雾和气体的定量测定程序
简介：
信息：ICS：13.100 CCS：发布：2012-07-11 实施：

ISO 15011-2-2009 焊接和相关工艺中的健康和安全.对电弧焊产生的烟尘和气体取样的实验室方法.第2部分:在电弧焊,切削加工和刨削槽时，一氧化碳(CO),二氧化碳(CO₂),氧化氮(NO)和二氧化氮(NO₂)排放率的测定
简介：
信息：ICS：13.040.30;13.100;25.160.10 CCS：J33 发布：2009-10 实施：

ISO 19703-2005 燃烧中有毒气体的生成和分析.实验室燃烧中物质产生、当量比和燃烧效率的计算
简介：This International Standard provides definitions and equations for the calculation of toxic product yields and the fire conditions under which they have been derived in terms of equivalence ratio and combustion efficiency. Sample calculations for practical cases are provided. The methods can be used to produce either instantaneous or averaged values for those experimental fires in which time-resolved data are available.This International Standard is intended to provide guidance to fire researchers for— appropriate experimental fire data to be recorded,— calculating average yields of gases and smoke in fire effluents in fire tests and fire-like combustion in reduced scale apparatus— characterizing burning behaviour in experimental fires in terms of equivalence ratio and combustion efficiency using oxygen consumption and product generation data.This International Standard does not provide guidance on the operating procedure of any particular piece of apparatus or interpretation of data obtained therein (e.g. toxicological significance of results).
信息：ICS：13.220.01 CCS：C80 发布：2005-05 实施：

CEN ISO/TS 15011-6-2012 焊接及相关工艺中的健康和安全烟尘和气体取样的实验室方法第6部分:来自电阻点焊的烟尘和气体的定量测定规程
简介：This part of ISO 15011 provides guidance on determination of emission rates of fume and gases generated byspot welding of uncoated and coated steel sheets, expressed as the quantity of pollutants per spot weld. Itdescribes the test principle and considers methods for sampling and analysis.
信息：ICS：13.100;25.160.10 CCS：发布：2012-07-01 实施：

ISO 15011-1-2009 焊接和相关工艺中的健康和安全.烟尘和气体的实验室取样方法.第1部分:电弧焊产生的烟尘排放率测定和烟尘采集分析
简介：
信息：ICS：13.040.30;13.100;25.160.10 CCS：J33 发布：2009-10 实施：

DIN 12918-4-2004 实验室设备.实验室配件.第4部分:纯气体阀门
简介：
信息：ICS：71.040.10 CCS：N64 发布：2004-11 实施：

ISO/TS 15011-6-2012 焊接和相关工艺的卫生和安全性.烟尘和气体取样的实验室法.第6部分:来自电阻焊点的烟尘和气体定量测定规程
简介：
信息：ICS：13.100;25.160.10 CCS：J33 发布：2012-07 实施：

NF A88-200-4/A1-2009 焊接和相关工艺中的健康和安全.烟尘和气体取样用实验室方法.第4部分:烟尘数据单
简介：
信息：ICS：13.100;25.160.10 CCS：J33 发布：2009-03-01 实施：2009-03-11

BS EN ISO 15011-2-2003 焊接和相关工艺的卫生和安全.电弧焊产生的烟和气体取样的实验室法.除臭氧外的气体排放率的测定
简介：ISO 15011-2:2003 provides guidance on the determination of emission rates of gases generated by arc welding using a fume box technique. It describes the test principle, gives a possible fume box arrangement and considers methods for sampling and analysis.The following gases that can be produced during arc welding are covered:- carbon monoxide (CO);- carbon dioxide (CO2);- nitrogen oxide (NO);- nitrogen dioxide (NO2).The fume box described in this International Standard may also be used for the determination of organic gases produced in the arc welding of coated metals, e.g. primed, painted or plastic coated material.
信息：ICS：13.040.30;25.160.10 CCS：J33 发布：2003-05-27 实施：2003-05-27

DIN EN ISO 15011-5-2012 焊接及相关工艺的卫生安全.烟尘和气体取样的实验室方法.第5部分:鉴定时，全部或部分由有机材料组成的产品通过焊接或切割产生的热降解产物的鉴定
简介：
信息：ICS：13.040.30;25.160.10 CCS：J33 发布：2012-01 实施：

EN ISO 15011-3-2009 焊接和相关工艺的健康和安全.烟和气体取样的实验室法.第3部分:电弧焊时臭氧排放率的测定
简介：This part of ISO 15011 defines a laboratory method for measuring the emission rate of ozone during arc welding, using a hood technique. The method is directed primarily at measuring ozone emission rate when using gas-shielded arc welding processes, but it can also be employed with other processes, e.g. self-shielded flux-cored arc welding, provided that welding can be performed automatically under the hood.
信息：ICS：13.040.30;13.100;25.160.10 CCS：发布：2009 实施：

EN ISO 15011-2-2003 焊接和相关工艺的卫生和安全.电弧焊产生的烟和气体取样的实验室法.第2部分:除臭氧外的气体排放率的测定 ISO 15011-2-2003
简介：
信息：ICS：13.040.40;25.160.01 CCS：发布：2003-05-27 实施：

NF A88-200-5-2011 焊接及相关工艺的防护和安全.烟尘和气体取样的实验室方法.第5部分:通过完全或部分有机材料组成的产品焊接或切割时所产生的热降解产品的识别
简介：
信息：ICS：13.040.30;25.160.10 CCS：J33 发布：2011-12-01 实施：2011-12-16

EN ISO 15011-2-2009 焊接和相关工艺中的健康和安全.烟尘和气体取样的实验室方法.第2部分:在电弧焊,切削加工和刨削槽时,一氧化碳(CO),二氧化碳(CO₂),氧化氮(NO)和二氧化氮(NO₂)排放率的测定
简介：This part of ISO 15011 defines laboratory methods for measuring the emission rates of carbon monoxide (CO), carbon dioxide (CO2), nitrogen monoxide (NO) and nitrogen dioxide (NO2) generated during arc welding, cutting and gouging, using a hood technique. The methodology is suitable for use with all open arc welding processes, cutting and gouging but different designs of hood are used depending on the process and whether or not it can be conducted automatically.
信息：ICS：13.040.40;13.100;25.160.10 CCS：发布：2009 实施：

ISO 15011-2-2003 焊接和相关工艺中的保健和安全.对电弧焊产生的烟尘和气体取样的实验室方法.第2部分:除臭氧外气体的排放率的测定
简介：This European Standard provides guidance on the determination of emission rates of gases generated by arc welding using a fume box technique. It describes the test principle, gives a possible fume box arrangement and considers methods for sampling and analysis.The following gases that can be produced during arc welding are covered:- Carbon monoxide (CO);- Carbon dioxide (CO2);- Nitrogen oxide (NO);- Nitrogen dioxide (NO2).The fume box described in this standard can also be used for the determination of organic gases produced in the arc welding of coated metals, e.g. primed, painted or plastic coated material (see annex A for further information).Ozone is considered in EN ISO 15011-3.
信息：ICS：13.040.30;25.160.10 CCS：J33 发布：2003-05 实施：

ISO 15011-5-2011 焊接和同类工艺过程中的健康和安全.实验室法烟气抽样.第5部分:采用热解气体色谱质谱联用法对焊接过程中所产生的热降解产品或全部或部分由有机材料制成的刻纹过深产品进行鉴定
简介：
信息：ICS：13.040.30;13.100;25.160.10 CCS：C52 发布：2011-10 实施：

EN ISO 15011-1-2009 焊接和相关工艺中的健康和安全.烟尘和气体的实验室取样方法.第1部分:电弧焊产生的烟尘排放率测定和烟尘采集分析
简介：This part of ISO 15011 defines a laboratory method for measuring the emission rate of fume from arc welding.It also defines a method of collecting the fume for subsequent analysis and refers to suitable analyticaltechniques. The methods described are suitable for use with all open arc welding processes except tungsteninert gas (TIG) welding, which produces little fume.
信息：ICS：13.040.40;13.100;25.160.10 CCS：发布：2009 实施：

ISO 15011-2:2003 焊接和相关工艺中的健康和安全.电弧焊接产生的烟雾和气体取样的实验室方法.第2部分:除臭氧外气体排放率的测定
简介：
信息：ICS：13.100 CCS：发布：2003-04-30 实施：

ISO 15011-5:2011 焊接和相关工艺的健康与安全——烟雾和气体取样的实验室方法第5部分:使用热解气相色谱-质谱法识别焊接或切割全部或部分有机材料组成的产品时产生的热降解产物
简介：
信息：ICS：13.100 CCS：发布：2011-09-23 实施：

ISO 15011-4:2006/Amd 1:2008 焊接和相关工艺中的健康和安全.烟雾和气体取样的实验室方法.第4部分:烟雾数据表.修改件1
简介：
信息：ICS：13.100 CCS：发布：2008-12-02 实施：

KS C IEC 61010-2-42-2002(2013) 测量、控制和实验室用电气设备的安全要求第2－42部分:医疗材料处理和实验室过程中使用有毒气体的高压灭菌器和灭菌器的特殊要求
简介：
信息：ICS：71.040.20 CCS：发布：2002-11-30 实施：

EN ISO 15011-5-2011 焊接及相关工艺的卫生安全.烟尘和气体取样的实验室方法.第5部分:鉴定时,全部或部分由有机材料组成的产品通过焊接或切割产生的热降解产物的鉴定
简介：This part of ISO 15011 specifies procedures for obtaining information about thermal degradation productsgenerated when welding, cutting through, preheating and straightening metal treated with coatings composedwholly or partly of organic substances, e.g. shop primers, paints, oils, waxes and inter?weld materials suchas adhesives and sealants. It is aimed primarily at test laboratories performing such procedures. The datagenerated can be used by coating manufacturers to provide information for inclusion in safety data sheetsand by occupational hygienists to identify thermal degradation products of significance in the performance ofrisk assessments and/or workplace exposure measurements. The data cannot be used to estimate workplaceexposure directly.
信息：ICS：13.040.30;25.160.10 CCS：发布：2011 实施：

ISO 15011-4-2006/Amd 1-2008 焊接和相关工艺中的健康和安全.烟雾和气体取样的实验室方法.第4部分:烟雾数据表.修改件1
简介：
信息：ICS：13.100 CCS：发布：2008-12-02 实施：

KS C IEC 61010-2-42-2002 测量、控制和实验室用电气设备的安全要求.第2-42部分:医疗材料处理与实验室加工用有毒气体高压杀菌器的特殊要求
简介：교 체이 규격은 자동 부하 싣기와 부리기 시스템이 있는 것을 포함하며, 의료 물질
信息：ICS：71.040.20 CCS：N20 发布：2002-11-30 实施：2002-11-30