气相色谱仪检测标准气相色谱仪-中析研究所检测

(CMA)

(CNAS)

(ISO)

(高新技术企业)

气相色谱仪相关标准参考信息

GB/T 30431-2020 实验室气相色谱仪
简介：
信息：ICS：17.180.99 CCS：N52 发布：2020-06-02 00:00:00.0 实施：2021-01-01 00:00:00.0

JB/T 12965-2016 水中挥发性有机物在线气相色谱仪
简介：
信息：ICS：17.180.99 CCS：N52 发布：2016-10-22 实施：2017-04-01

ASTM D4457-02(2008) 通过直接注入气相色谱仪测定涂料和涂层中二氯甲烷和1,1,1-三氯乙烷的标准试验方法
简介：
信息：ICS：87.040 CCS：发布：2008-02-01 实施：

GB/T 30430-2019 气相色谱仪测试用标准色谱柱
简介：
信息：ICS：17.180.99 CCS：N52 发布：2019-10-18 00:00:00.0 实施：2020-05-01 00:00:00.0

JJG 700-2016 气相色谱仪
简介：本规程适用于配有热导检测器(TCD)、火焰离子化检测器(FID)、火焰光度检测器(FPD)、电子捕获检测器(ECD)、氮磷检测器(NPD)的气相色谱仪的首次检定、后续检定和使用中检查。
信息：ICS： CCS：发布：2016-06-27 实施：2016-12-27

ASTM D6133-02(2008) 通过直接注入气相色谱仪测定溶剂型和水性涂料、涂料、树脂和原料中丙酮、p-三氟氯苯甲酸、乙酸甲酯或t-乙酸丁酯含量的标准试验方法
简介：
信息：ICS：87.040 CCS：发布：2008-02-01 实施：

GB/T 30431-2013 实验室气相色谱仪
简介：本标准规定了实验室气相色谱仪的要求、试验方法、检验规则及标志、包装、运输和贮存。本标准适用于实验室通用气相色谱仪(以下简称“仪器”)。
信息：ICS：17.180.99 CCS：N52 发布：2013-12-31 实施：2014-08-01

ISO/TR 14749-2016 天然气. 上游区域的在线气相色谱仪
简介：
信息：ICS：75.060 CCS：E24 发布：2016-0501 实施：

ASTM D3271-87(2006) 溶剂分析用气相色谱仪直接注入溶剂可还原涂料的标准实施规程
简介：
信息：ICS：87.060.30 CCS：发布：2006-06-01 实施：

GB/T 30430-2013 气相色谱仪测试用标准色谱柱
简介：本标准规定了气相色谱仪测试用标准色谱柱的术语、分类、要求、试验方法、检验规则、标志、包装、运输、贮存等。本标准适用于气相色谱仪测试用标准色谱柱(以下简称“标准柱”)。
信息：ICS：17.180.99 CCS：N52 发布：2013-12-31 实施：2014-08-01

ISO/TR 14749-2016 天然气. 上游区域的在线气相色谱仪
简介：
信息：ICS：75.060 CCS：发布：2016-05-00 实施：

ASTM D7165-06 气相色谱仪基于在线/在线分析气态燃料硫含量的标准实践
简介：
信息：ICS：71.040.50 CCS：发布：2006-01-15 实施：

ASTM D3792-16(2022) 直接注入气相色谱仪测定涂层含水量的标准试验方法
简介：
信息：ICS：87.040 CCS：发布：2022-12-01 实施：

ASTM D3792-16 通过直接注入气相色谱仪的涂料含水量的标准测试方法
简介：
信息：ICS：87.040 CCS：发布：2016-04-01 实施：

ASTM E1510-95(2005) 气相色谱仪中安装熔融二氧化硅开放式管状毛细管色谱柱的标准实践
简介：
信息：ICS：71.040.50 CCS：发布：2005-02-01 实施：

SY/T 6679.2-2022 综合录井仪校准方法第2部分：录井气相色谱仪
简介：
信息：ICS：75.180 CCS：E90 发布：2022-11-04 实施：2023-05-04

ASTM D3792-2016 采用直接注入气相色谱仪测定涂层含水量的标准试验方法
简介：4.1x00a0;In order to calculate volatile organic content (VOC) in waterborne paints, it is necessary to know the water content. This gas chromatographic test method provides a relatively simple and direct way to determine water content. 1.1x00a0;This test method is for the determination of the total water content of waterborne paints. It has been evaluated for latex systems (styrene-butadiene, poly(vinylacetate)-acrylic, acrylic), epoxy acrylic resin systems and acrylic systems. The established working range of this test method is from 15 to 908201;%. There is no reason to believe that it will not work outside of this range. 1.2x00a0;The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. 1.3x00a0;This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
信息：ICS：87.040 CCS：发布：2016 实施：

ASTM D3792-05 通过直接注入气相色谱仪的涂料含水量的标准测试方法
简介：
信息：ICS：87.040 CCS：发布：2005-01-01 实施：

ASTM D7165-22 气体燃料硫含量在线/在线分析用气相色谱仪的标准实施规程
简介：
信息：ICS：71.040.50 CCS：发布：2022-11-01 实施：

ASTM D7165-10(2015) 气相色谱仪基于在线/在线分析气态燃料硫含量的标准实践
简介：
信息：ICS：71.040.50 CCS：发布：2015-06-01 实施：

ASTM D6133-02 通过直接注入气相色谱仪测定溶剂型和水性涂料、涂料、树脂和原料中丙酮、p-三氟氯苯甲酸、乙酸甲酯或t-乙酸丁酯含量的标准试验方法
简介：
信息：ICS：87.040 CCS：发布：2002-12-10 实施：

T/SXCAA 018-2022 气相色谱仪期间核查规程
简介：本文件确立了气相色谱仪期间核查程序，规定了一般要求、期间核查的方法及判定、核查结果的处理的操作指示。
信息：ICS：03.120.10 CCS：M745 发布：2022-03-29 实施：2022-04-07

ASTM D3792-05(2015) 通过直接注入气相色谱仪的涂料含水量的标准测试方法
简介：
信息：ICS：87.040 CCS：发布：2015-06-01 实施：

ASTM D4457-02 通过直接注入气相色谱仪测定涂料和涂层中二氯甲烷和1,1,1-三氯乙烷的标准试验方法
简介：
信息：ICS：87.040 CCS：发布：2002-01-10 实施：

JJF 1953-2021 硫化学发光检测器气相色谱仪校准规范
简介：
信息：ICS： CCS：发布：2021-12-28 实施：2022-06-28

ASTM D6133-02(2014) 通过直接注入气相色谱仪测定溶剂型和水性涂料、涂料、树脂和原料中丙酮、p-三氟氯苯甲酸、乙酸甲酯或t-乙酸丁酯含量的标准试验方法
简介：
信息：ICS：87.040 CCS：发布：2014-07-01 实施：

ASTM D4457-85(1996)e1 通过直接注入气相色谱仪测定涂料和涂层中二氯甲烷和1,1,1-三氯乙烷的标准试验方法
简介：
信息：ICS：87.040 CCS：发布：2002-01-10 实施：

T/CEC 426.2-2021 电力用油测试仪器通用技术条件第2部分：气相色谱仪
简介：本文件规定了实验室绝缘油中溶解气体组分含量分析用气相色谱仪（以下简称仪器）的技术要求、试验方法、检验规则及标志、包装、运输、贮存等要求。本文件适用于实验室绝缘油中溶解气体组分含量分析用气相色谱仪。
信息：ICS：75.080 CCS：D4420 发布：2021-12-06 实施：2022-07-03

ASTM E1510-95(2013)e1 气相色谱仪中安装熔融二氧化硅开放式管状毛细管色谱柱的标准实践
简介：
信息：ICS：71.040.50 CCS：发布：2013-01-01 实施：

ASTM D4457-2002 直接注入气相色谱仪法测定涂料及涂层中二氯甲烷和1,1,1-三氯乙烷的标准试验方法
简介：Use of 1,1,1-trichloroethane and dichloromethane, which do not measurably contribute to the atmospheric oxidant level, is a way for industry to meet government or other regulations on volatile organic compounds. This test method is designed to determine the content of these halohydrocarbon solvents in paints and coatings. That content can subsequently be used in calculating the volatile organic compound content of a coating. 1.1 This test method covers the determination of total amount of dichloromethane or 1,1,1-trichloroethane, or both, in paints and coatings. It has been evaluated for cellulose nitrate, alkyd, vinyl, and styrene-butadiene systems. It has not yet been evaluated for other formulations, but is believed to be applicable. The established working range of this test method is from 31 to 65 % for 1,1,1-trichloroethane and 32 to 78 % for dichloromethane. There is no reason to believe it will not work outside of these ranges. The presence of 1-propanol in paints and coatings requires the use of a different internal standard. (See also Practice E 260.) 1.2 The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are for information only.1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. Specific hazard statements are given in Section 7.
信息：ICS：87.040 (Paints and varnishes) CCS：G50 发布：2002 实施：

SY/T 7658-2021 天然气在线气相色谱仪性能评价
简介：
信息：ICS：75.060 CCS：E24 发布：2021-11-16 实施：2022-02-16

GOST 8.485-2013 确保测量一致性的国家系统. 分析实验室气相色谱仪. 验证方法
简介：
信息：ICS：17.020;17.040.30 CCS：发布：2013 实施：2015-07-01

ASTM D4457-2002(2008) 直接注入气相色谱仪法测定涂料及涂层中二氯甲烷和1,1,1-三氯乙烷的标准试验方法
简介：Use of 1,1,1-trichloroethane and dichloromethane, which do not measurably contribute to the atmospheric oxidant level, is a way for industry to meet government or other regulations on volatile organic compounds. This test method is designed to determine the content of these halohydrocarbon solvents in paints and coatings. That content can subsequently be used in calculating the volatile organic compound content of a coating. 1.1 This test method covers the determination of total amount of dichloromethane or 1,1,1-trichloroethane, or both, in paints and coatings. It has been evaluated for cellulose nitrate, alkyd, vinyl, and styrene-butadiene systems. It has not yet been evaluated for other formulations, but is believed to be applicable. The established working range of this test method is from 31 to 65 % for 1,1,1-trichloroethane and 32 to 78 % for dichloromethane. There is no reason to believe it will not work outside of these ranges. The presence of 1-propanol in paints and coatings requires the use of a different internal standard. (See also Practice E 260.) 1.2 The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are for information only. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. Specific hazard statements are given in Section 7.
信息：ICS：87.040 (Paints and varnishes) CCS：G50 发布：2002 实施：

ASTM E1510-95(2021) 气相色谱仪中安装熔融二氧化硅开放式管状毛细管色谱柱的标准实践
简介：
信息：ICS：71.040.50 CCS：发布：2021-04-01 实施：

ASTM D7165-10 气相色谱仪基于在线/在线分析气态燃料硫含量的标准实践
简介：
信息：ICS： CCS：发布：2010-01-01 实施：

ASTM D4457-2002(2014) 使用气相色谱仪直接注入法测定涂料和清漆中二氯甲烷和1,1,1-三氯乙烷的标准试验方法
简介：4.1x00a0;Use of 1,1,1-trichloroethane and dichloromethane, which do not measurably contribute to the atmospheric oxidant level, is a way for industry to meet government or other regulations on volatile organic compounds. This test method is designed to determine the content of these halohydrocarbon solvents in paints and coatings. That content can subsequently be used in calculating the volatile organic compound content of a coating. 1.1x00a0;This test method covers the determination of total amount of dichloromethane or 1,1,1-trichloroethane, or both, in paints and coatings. It has been evaluated for cellulose nitrate, alkyd, vinyl, and styrene-butadiene systems. It has not yet been evaluated for other formulations, but is believed to be applicable. The established working range of this test method is from 31 to 658201;% for 1,1,1-trichloroethane and 32 to 788201;% for dichloromethane. There is no reason to believe it will not work outside of these ranges. The presence of 1-propanol in paints and coatings requires the use of a different internal standard. (See also Practice E260.) 1.2x00a0;The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.3x00a0;This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. Specific hazard statements are given in Section 7.
信息：ICS：87.040 (Paints and varnishes) CCS：G51 发布：2002 实施：

ASTM D6133-02(2021) 通过直接注入气相色谱仪测定溶剂型和水性涂料、涂料、树脂和原材料中丙酮、p-三氟化氯苯甲酸甲酯、乙酸甲酯或t-乙酸丁酯含量的标准试验方法
简介：
信息：ICS：87.040 CCS：发布：2021-02-01 实施：

ASTM UOP965-2010 使用具有火焰电离探测功能的综合二维气相色谱仪测定合成链烷煤油类燃料中的总环烷和总芳香烃含量
简介：This method is for determining total cycloparaffins (naphthenes) and total aromatics in synthetic paraffinic kerosene fuels (SPK) or petroleum distillates in the boiling range of 69癈 to 350癈 using comprehensive two-dimensional gas chromatography (GCxGC) coupled with a flame ionization detector (FID). Molecular type groups are identified by their location, as plotted on a chromatographic contour plot image. The precision of this test method has been established for SPK fuels containing from 1.6 to 32.3 mass-% naphthenic hydrocarbons and 0.03 to 1.9 mass-% aromatic hydrocarbons. Alkenes and compounds containing sulfur, nitrogen, and oxygen are possible interferents.
信息：ICS： CCS：E31 发布：2010 实施：

ASTM D3271-87(1993)e1 溶剂分析用气相色谱仪直接注入溶剂可还原涂料的标准实施规程
简介：
信息：ICS： CCS：发布：2001-01-01 实施：

T/CEC 425-2020 电力用气相色谱仪验收及使用维护导则
简介：本文件规定了绝缘油中溶解气体和六氟化硫气体实验室分析用气相色谱仪的验收标准以及使用维护注意事项。本文件适用于绝缘油中溶解气体和六氟化硫气体实验室分析用气相色谱仪的验收及使用维护。
信息：ICS：27.100 CCS：D4420 发布：2020-10-28 实施：2022-06-19

SY/T 6679.2-2009 综合录井仪校准方法.第2部分:录井气相色谱仪
简介：SY/T 6679的本部分规定了综合录井仪中录井气相色谱仪的技术要求及校准条件、校准项目、校准方法、校准结果和校准间隔。本部分适用于新制造、使用中和修理后的色谱仪校准。
信息：ICS：75.180 CCS：E90 发布：2009-12-01 实施：2010-05-01

ASTM D3271-87(2001) 溶剂分析用气相色谱仪直接注入溶剂可还原涂料的标准实施规程
简介：
信息：ICS：87.060.30 CCS：发布：2001-01-01 实施：

ISO 21701-2019 纺织品 - 控制堆肥条件下纺织材料水解生物降解试验方法 - 气相色谱仪分析进化二氧化碳
简介：
信息：ICS：59.080.01 CCS：发布：2019-09-04 实施：

JJG 1055-2009 在线气相色谱仪检定规程
简介：本规程适用于天然气贸易交接、大气环境检测分析用在线气相色谱仪（以下简称仪器）的首次检定、后续检定和使用中检验。在线气相色谱仪型式评价、定型鉴定中有关计量性能试验部分可参照本规程进行。
信息：ICS： CCS：N52 发布：2009-10-09 实施：2010-01-09

ASTM D6133-00 通过直接注入气相色谱仪测定溶剂可还原和水可还原涂料、涂料、树脂和原材料中丙酮、p-三氟化氯苯、乙酸甲酯或t-乙酸丁酯含量的试验方法
简介：
信息：ICS：87.040 CCS：发布：2000-05-10 实施：

KS I ISO TR 14749-2018 天然气 - 上游地区的在线气相色谱仪
简介：
信息：ICS：75.060 CCS：发布：2018-05-08 实施：

ASTM D6060-96(2009) 用便携式气相色谱仪对流量通风口进行采样的标准操作
简介：
信息：ICS：71.040.50 CCS：发布：2009-10-01 实施：

ASTM E1510-95 气相色谱仪中安装熔融二氧化硅开放式管状毛细管色谱柱的标准实践
简介：
信息：ICS： CCS：发布：2000-01-01 实施：

JJF 1694-2018 气相色谱仪型式评价大纲
简介：
信息：ICS： CCS：发布：2018-02-27 实施：2018-05-27

NF V18-141-2009 牲畜饲料.气相色谱仪/电子捕获检测器测定有机氯杀虫剂和多氯联苯
简介：
信息：ICS：65.120 CCS：B46 发布：2009-07-01 实施：2009-07-24

ASTM E1510-95(2000) 气相色谱仪中安装熔融二氧化硅开放式管状毛细管色谱柱的标准实践
简介：
信息：ICS：71.040.50 CCS：发布：2000-01-01 实施：

ASTM D6060-17 用便携式气相色谱仪对过程排气口取样的标准试验方法
简介：
信息：ICS：71.040.50 CCS：发布：2017-10-01 实施：

NF V18-142-2009 牲畜饲料.气相色谱仪/电子捕获检测器测定有机氯杀虫剂和多氯联苯
简介：
信息：ICS：65.120 CCS：B46 发布：2009-07-01 实施：2009-07-24

ASTM D3792-99 通过直接注入气相色谱仪的涂料含水量的标准测试方法
简介：
信息：ICS：87.040 CCS：发布：1999-05-10 实施：

ASTM D6060-2017 用便携式气相色谱仪对工艺通风口取样的标准试验方法
简介：5.1x00a0;This test method has been widely used to obtain mass balance data for process scrubbers, to determine the efficiency of VOC emission control equipment, and to obtain data to support air permit applications. 5.2x00a0;This test method will have applications to the Maximum Achievable Control Technology (MACT) Rule and may have applications to Compliance Assurance Monitoring verification required by the 1990 Clean Air Act Title III Amendments. 5.3x00a0;This test method, when used with Test Methods D3464 or D3154 or on-line process flow meter data, can be used to calculate detailed emission rate profiles for VOCs from process vents. 5.4x00a0;This test method provides nearly real time results that can detect process changes or upsets that may be missed using conventional sorbent tube or integrated gas sampling bag sampling. 1.1x00a0;This test method describes a method for direct sampling and analysis of process vents for volatile organic compound (VOC) vapors and permanent gases using a portable gas chromatograph (GC). 1.2x00a0;This test method is applicable to analysis of permanent gases such as oxygen (O2), carbon dioxide (CO2) and nitrogen (N2), as well as vapors from organic compounds with boiling points up to 125x00b0;C. 1.3x00a0;The detection limits obtained will depend on the portable gas chromatograph and detector used. Detectors available include but are not limited to thermal conductivity, photoionization, argon ionization, and electron capture. For instruments equipped with thermal conductivity detectors, typical detection limits are one to two parts per million by volume (ppm(v)) with an applicable concentration range to high percent by volume levels. For instruments with photoionization detectors detection limit of one to ten parts per billion by volume (ppb(v)) are obtainable with a concentration range from 1000 to 2000 ppm(v). The argon ionization detector has an achievable detection limit of one (ppb(v)), while the electron capture detector has an achievable detection limit of one part per trillion by volume (ppt(v)) for chlorinated compounds. 1.4x00a0;The applicability of this test method should be evaluated for each VOC by determining stability, reproducibility, and linearity. 1.5x00a0;The appropriate concentration range must also be determined for each VOC, as the range will depend on the vapor pressure of the particular VOC. 1.6x00a0;The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.7x00a0;This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish ......
信息：ICS：71.040.50 CCS：Z04 发布：2017 实施：

ASTM D3792-05(2009) 通过直接注入气相色谱仪的涂料含水量的标准测试方法
简介：
信息：ICS：87.040 CCS：发布：2009-06-01 实施：

ASTM D3792-1999 用直接注入式样气相色谱仪法测定水稀释涂料中水含量的试验方法
简介：1.1 This test method is for the determination of the total water content of water-reducible paints. It has been evaluated for latex systems (styrene-butadiene, poly(vinylacetate)acrylic, acrylic). It has not yet been evaluated for other water-reducible paints but is believed to be applicable. The established working range of this method is from 40 to 55% water. There is no reason to believe that it will not work outside of this range. 1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
信息：ICS：87.040 (Paints and varnishes) CCS：G50 发布：1999 实施：

JB/T 12965-2016 水中挥发性有机物在线气相色谱仪
简介：
信息：ICS：17.180.99 CCS：N52 发布：2016-10-22 实施：2017-04-01

HG/T 4095-2009 化工用在线气相色谱仪
简介：本标准规定了化工流程用在线气相色谱仪要求、试验方法、检验规则及标志、包装、运输、贮存等。本标准适用于安装有热导检测器（TCD）或氢火焰离子化检测器（FID）的化工用在线工业气相色谱仪。
信息：ICS：71.120;25.040.40;17.040.30 CCS：G97 发布：2009-02-05 实施：2009-07-01

JJG 700-1999 气相色谱仪检定规程
简介：
信息：ICS： CCS：A61 发布：1999 实施：1999-09-01