iec60287-3检测标准iec60287-3-中析研究所检测

(CMA)

(CNAS)

(ISO)

(高新技术企业)

iec60287-3相关标准参考信息

KS C IEC 60287-3-2-2020 电缆 - 电流额定值的计算 - 第3-2部分:操作条件部分 - 电源线尺寸的经济优化
简介：
信息：ICS：29.060.20 CCS：发布：2020-12-24 实施：

BS IEC 60287-3-2-2012 电缆. 额定电流的计算. 操作条件部分. 电力电缆尺寸的经济优化
简介：
信息：ICS：29.060.20 CCS：K13 发布：2012-11-30 实施：2012-11-30

IEC 60287-3-1 Edition 1.1-1999 电缆.电流额定的计算.第3部分:操作条件的选择.参考操作条件和电缆类型的选择
简介：This section of IEC 60287-3 is applicable to the conditions of steady-state operation of cables at all alternating voltages, and direct voltages up to 5 kV, buried directly in the ground, in ducts, troughs or in steel pipes, both with and without partial drying-out of the soil, as well as cables in air. The term "steady state" is intended to mean a continuous constant current (100 % load factor) just sufficient to produce asymptotically the maximum conductor temperature, the surrounding ambient conditions being assumed constant.This section concerns reference operating conditions and selection of cable type.
信息：ICS：29.060.20 CCS：K13 发布：1999-05 实施：

BS IEC 60287-2-3-2017
简介：
信息：ICS：29.060.20 CCS：发布：2017-07-19 实施：2017-07-31

IEC 60287-3-2:2012 电缆 - 电流额定值的计算 - 第3-2部分:操作条件部分 - 电源线尺寸的经济优化
简介：
信息：ICS：29.060.20 CCS：发布：2012-07-04 实施：

IEC 60287-3-1 AMD 1-1999 电缆电流定额的计算第3部分:运行条件的章节第1节:基准运行条件和电缆类型的选择修改1
简介：This standard is Electric cables - Calculation of the current rating - Part 3-1: Sections on operating conditions - Reference operating conditions and selection of cable type; Amendment 1.
信息：ICS：29.060.20 CCS：K13 发布：1999-02 实施：

BS IEC 60287-3-1-2017
简介：
信息：ICS：29.060.20 CCS：发布：2017-07-19 实施：2017-07-31

IEC 60287-3-2-2012 Electric cables – Calculation of the current rating – Part 3-2: Sections on operating conditions – Economic optimization of power cable size (Edition 2.0)
简介：This part of IEC 60287 sets out a method for the selection of a cable size taking into account the initial investments and the future costs of energy losses during the anticipated operational life of the cable. Matters such as maintenance@ energy losses in forced cooling systems and time of day energy costs have not been included in this standard. Two examples of the application of the method to hypothetical supply systems are given in Annex A.
信息：ICS：/ CCS：/ 发布：2012-07-01 实施：2012-08-03

IEC 60287-3-2 AMD 1-1996 Amendment 1 Electric Cables - Calculation of the Current Rating - Part 3: Sections on Operating Conditions - Section 2: Economic Optimization of Power Cable Size (Edition 1.0)
简介：This International Standard deals solely with the economic choice of conductor size based on joule losses. Voltage dependent losses have not been considered.NOTES1 It is recommended that the method given in this standard should not be used for cables operating on system voltages equal to or greater than the following (see IEC 287-1-1): 2 Modifications to the method given in this standard in order to take dielectric losses into account are under consideration.Likewise@ matters such as maintenance@ energy losses in forced cooling systems and time of day energy costs have not been included in this standard.An example of the application of the method to a hypothetical supply system is given in annex A.
信息：ICS：/ CCS：/ 发布：1996-09-01 实施：1997-05-03

BS IEC 60287-3-1-2017 电缆.电流额定的计算.第3-1部分:操作条件.现场参考条件
简介：
信息：ICS：29.060.20 CCS：K13 发布：2017-07-19 实施：2017-07-31

IEC 60287-3-2-2012 电缆.额定电流的计算.第3-2部分:运行条件部分.电力电缆尺寸最佳经济选择
简介：
信息：ICS：29.060.20 CCS：K13 发布：2012-07 实施：

IEC 60287-3-2 AMD 1-1996 电缆电流定额的计算第3部分:运行条件的章节第2节:电力电缆尺寸最佳经济选择修改1
简介：This is Amendment 1 IEC 60287-3-2-1996 (Electric cables-Calculation of the current rating-Part3:Srctions kn oprtaing conditions-Section 2:Economic optimization of power cable size)This is Amendment IEC 60287-3-2-1996
信息：ICS：29.060.20 CCS：K13 发布：1996-09 实施：

BS IEC 60287-2-3-2017
简介：
信息：ICS：29.060.20 CCS：发布：2017-07-19 实施：2017-07-31

GOST R IEC 60287-3-3-2011 电缆.额定电流的计算.第3-3部分.工作条件部分.电缆穿过外部热源
简介：
信息：ICS：29.060.20 CCS：发布：2011 实施：2012-07-01

IEC 60287-3-1:1995 电缆 - 电流额定值的计算 - 第3部分:工作条件部分 - 第1节:参考工作条件和电缆类型的选择
简介：
信息：ICS：29.060.20 CCS：发布：1995-08-08 实施：

IEC 60287-3-1:2017 电缆.额定电流的计算.第3-1部分:操作条件.现场参考条件
简介：
信息：ICS：29.060.20 CCS：发布：2017-06-08 实施：

GOST R IEC 60287-3-2-2011 电缆.额定电流的计算.第3-2部分.工作条件部分.动力电缆规格的经济学最适化
简介：
信息：ICS：29.060.20 CCS：发布：2011 实施：2012-07-01

IEC 60287-3-1-1995 电缆电流定额的计算第3部分:运行条件的章节第1节:基准运行条件和电缆类型的选择
简介：Specifies conditions of steady-state operation of cables at all alternating voltages, and direct voltages up to 5 kV, buried directly in the ground, troughs or in steel pipes as well as cables in air and concerns reference operating conditions and select
信息：ICS：29.060.20 CCS：K13 发布：1995-07 实施：

IEC 60287-3-1 (REDLINE + STANDARD)-2017
简介："This part of IEC 60287-3 is applicable to the conditions of steady-state operation of cables at all voltages@ buried directly in the ground@ in ducts@ troughs or in steel pipes@ both with and without partial drying-out of the soil@ as well as cables in air. The term ""steady state"" is intended to mean a continuous constant current (100 % load factor) just sufficient to produce asymptotically the maximum conductor temperature@ the surrounding ambient conditions being assumed constant. This document defines site reference conditions@ however the general values are superseded by specific national requirements."
信息：ICS：/ CCS：/ 发布：2017-06-01 实施：2017-06-12

GOST R IEC 60287-1-3-2009 电缆.额定电流的计算.第1-3部分:额定电流等式(100%负载系数)和损耗测定.平行单芯电缆的电流分配与循环电流损失测定
简介：
信息：ICS：29.060.20 CCS：发布：2009 实施：2010-01-01

IEC 60287-3-2-1995 Cables Electriques - Calcul Du Courant Admissible - Partie 3: Sections Concernant Les Conditions De Fonctionnement - Section 2: Optimisation Econcmique Des Sections D?Ame De Cables Electriques De Puissance (Edition 1.0)
简介：This International Standard deals solely with the economic choice of conductor size based on joule losses. Voltage dependent losses have not been considered. Likewise@ matters such as maintenance@ energy losses in forced cooling systems and time of day energy costs have not been included in this standard. An example of the application of the method to a hypothetical supply system is given in annex A.
信息：ICS：/ CCS：/ 发布：1995-06-01 实施：2008-04-27

IEC 60287-3-1-2017 电缆.电流额定的计算.第3-1部分:操作条件.现场参考条件
简介：This part of IEC 60287-3 is applicable to the conditions of steady-state operation of cables at all voltages, buried directly in the ground, in ducts, troughs or in steel pipes, both with and without partial drying-out of the soil, as well as cables in air. The term "steady state" is intended to mean a continuous constant current (100 % load factor) just sufficient to produce asymptotically the maximum conductor temperature, the surrounding ambient conditions being assumed constant. This document defines site reference conditions, however the general values are superseded by specific national requirements.
信息：ICS：29.060.20 CCS：K13 发布：2017-06 实施：

IEC 60287-3-2-1995 电缆电流定额的计算第3部分:运行条件的章节第2节:电力电缆尺寸最佳经济选择
简介：Deals with the economic choice of conductor size based on joule losses. Voltage dependent losses have not been considered.
信息：ICS：29.060.20 CCS：K13 发布：1995-06 实施：

IEC 60287-3-1-2017 电缆.电流额定的计算.第3部分:操作条件.现场参考条件
简介：This part of IEC 60287-3 is applicable to the conditions of steady-state operation of cables at all voltages, buried directly in the ground, in ducts, troughs or in steel pipes, both with and without partial drying-out of the soil, as well as cables in air. The term "steady state" is intended to mean a continuous constant current (100 % load factor) just sufficient to produce asymptotically the maximum conductor temperature, the surrounding ambient conditions being assumed constant. This document defines site reference conditions, however the general values are superseded by specific national requirements.
信息：ICS：29.060.20 CCS：K13 发布：2017-06 实施：

BS IEC 60287-3-3-2007 电缆.额定电流的计算.运行条件章节.横越外部热源的电缆
简介：This part of IEC 60287 describes a method for calculating the continuous current rating factor for cables of all voltages where crossings of external heat sources are involved. The method is applicable to any type of cable. The method assumes that the entire region surrounding a cable, or cables, has uniform thermal characteristics and that the principle of superposition applies. The principle of superposition does not strictly apply to touching cables and hence the calculation method set out in this standard will produce an optimistic result if applied to touching cables.
信息：ICS：29.060.20 CCS：K13 发布：2007-06-29 实施：2007-06-29

IEC 60287-3-1-1995 C?bles électriques - Calcul du courant admissible - Partie 3: Sect ions concernant I es conditions de fonctionnement - Section 1 : Conditions de fonctionnement de référence et sélection du type de c?ble (Edition 1.0)
简介：
信息：ICS：/ CCS：/ 发布：1995-01-01 实施：1999-06-16

IEC 60287-2-3:2017 电缆 - 电流额定值的计算 - 第2-3部分:热阻 - 安装在通风管道中的电缆
简介：
信息：ICS：29.060.20 CCS：发布：2017-04-11 实施：

IEC 60287-3-3:2007 电缆 - 电流额定值的计算 - 第3-3部分:操作条件部分 - 电缆穿过外部热源
简介：
信息：ICS：29.060.20 CCS：发布：2007-05-15 实施：

IEC 60287 AMD 3-1993 Calculation of the Continuous Current Rating of Cables (100% Load Factor) (Edition 2.0; Incorporates Amendment 1: 11/1988 and Amendment 2: 02/1991)
简介："Replace the first paragraph of this clause by the following: This standard deals solely with the conditions of steady-state operation of cables at all alternating voltages@ as well as in direct voltages up to 5 kV@ buried directly in the ground@ in ducts@ in troughs or in steel pipes@ both with and without partial drying-out of the soil@ as well as cables in air. The term ""steady state"" is intended to mean a continuous constant current (100 % load factor) just sufficient to produce asymptotically the maximum conductor temperature@ the surrounding ambient conditions being assumed constant."
信息：ICS：/ CCS：/ 发布：1993-03-01 实施：2014-06-24

IEC 60287-2-3-2017 Electric cables - Calculation of the current rating - Part 2-3: Thermal resistance - Cables installed in ventilated tunnels (Edition 1.0)
简介：This part of IEC 60287 describes a method for calculating the continuous current rating factor for cables of all voltages installed in ventilated tunnels. The method is applicable to any type of cable. The method applies to natural as well as forced ventilation. Longitudinal heat transfer within the cables and the surroundings of the tunnel is assumed to be negligible. All cables are assumed to be identical within the tunnel and it is assumed that the tunnel cross-section does not change with distance along the tunnel.
信息：ICS：/ CCS：/ 发布：2017-04-01 实施：2017-04-13

IEC 60287-3-3-2007 Electric cables – Calculation of the current rating – Part 3-3: Sections on operating conditions – Cables crossing external heat sources (Edition 1.0)
简介：This section of IEC 60287-3 is applicable to the conditions of steady-state operation of cables at all alternating voltages@ and direct voltages up to 5 kV@ buried directly in the ground@ in ducts@ troughs or in steel pipes@ both with and without partial drying-out of the soil@ as well as cables in air. The term ??steady state?? is intended to mean a continuous constant current (100 % load factor) just sufficient to produce asymptotically the maximum conductor temperature@ the surrounding ambient conditions being assumed constant. This section concerns reference operating conditions and selection of cable type.
信息：ICS：/ CCS：/ 发布：2007-05-01 实施：2007-05-17

IEC 60287 AMD 3-1993 第3次修改
简介：
信息：ICS：1600 CCS：K13 发布：1993-03 实施：

KS C IEC 60287-3-1-A-2014(2019) 电缆 - 电流额定值的计算 - 第3-1部分:工作条件部分 - 参考工作条件和电缆类型的选择
简介：
信息：ICS：29.060.20 CCS：发布：2014-10-03 实施：

IEC 60287-3-3-2007 电缆.电流定额的计算.第3-3部分:运行条件的章节.横越外部热源的电缆
简介：This part of IEC 60287 describes a method for calculating the continuous current rating factorfor cables of all voltages where crossings of external heat sources are involved. The methodis applicable to any type of cable.The method assumes that the entire region surrounding a cable, or cables, has uniformthermal characteristics and that the principle of superposition applies. The principle ofsuperposition does not strictly apply to touching cables and hence the calculation method setout in this standard will produce an optimistic result if applied to touching cables.
信息：ICS：29.060.20 CCS：K13 发布：2007-05 实施：

IEC 60287-2-3-2017 电缆.额定电流的计算.第2-1部分:热阻.热阻的计算
简介：
信息：ICS：29.060.20 CCS：发布：0000-00-00 实施：0000-00-00

KS C IEC 60287-1-3-2014 电缆.额定电流的计算.第1-3部分:额定电流方程式(负荷率100%)和损失率的计算.并联单心电缆间电流共享和循环电流损失率的计算
简介：이 표준은 병렬로 놓인 단심 케이블의 위상 전류와 순환 전류의 산출 방법을 규정한다.이 표준에서 설명한 방법은 물리적 배치에서 병렬로 놓인 위상에 따라서 매우 다양한 케이블에 사용할 수 있다. 위상 전류는 시스 접합 배열에 대하여 산출할 수 있다. 시스 손실을 계산하기 위해서는시스가 양쪽 끝에 접합되어 있다고 가정한다. 평형 2회선 회로의 시스 와전류 손실율을 계산하는 방법은 KS C IEC 60287-1-2에 규정하고 있다.?
信息：ICS：29.060.20 CCS：K13 发布：2014-10-03 实施：2014-10-03

KS C IEC 60287-3-2-2005 电缆.电流定额的计算.第3部分:运行条件的章节.第2节:电力电缆尺寸最佳经济选择
简介：이 규격은 케이블의 경제적 수명 동안의 초기 투자 비용과 미래 에너지 손실 비용을 고려하여
信息：ICS：29.060.20 CCS：K13 发布：2005-02-28 实施：2005-02-28

简介： 信息：

KS C IEC 60287-3-1-A-2014 电缆.额定电流的计算.第3-1部分:操作条件的选择.参考操作条件和电缆类型的选择
简介：이 표준은 토양의 부분 건조와 무관하게 모든 교류 전압 케이블을 지중, 관로, 트로프 또는 강관에 직접 매설한 5 kV 미만의 직류 전압 케이블의 정상 상태 동작 조건에 적용한다. “정상 상태”라는 용어는 대기 조건이 일정하다고 가정하여 최대 도체 온도를 점근적으로 생성하기에 충분한 연속 정전류(constant current)를 의미한다.이 표준은 표준 동작 온도와 케이블 유형의 선정에 대해 다룬다.?
信息：ICS：29.060.20 CCS：K13 发布：2014-10-03 实施：2014-10-03

简介： 信息：

BS IEC 60287-1-3-2003 电缆.电流定额的计算.电流定额公式(100%负载因数)和损耗的计算.并联单芯电缆间的电流分配和环流损耗的计算
简介：Provides a method for calculating the phase currents and circulating current losses in single-core cables arranged in parallel. The method described in this standard can be used for any number of cables per phase in parallel in any physical layout. The phase currents can be calculated for any arrangement of sheath bonding. For the calculation of sheath losses, it is assumed that the sheaths are bonded at both ends. A method for calculating sheath eddy current losses in two circuits in flat formation is given in IEC 60287-1-2.
信息：ICS：29.060.20 CCS：K13 发布：2003-10-15 实施：2003-10-15

简介： 信息：

KS C IEC 60287-3-3-2014 电缆.额定电流的计算.第3-3部分:操作条件的选择.横越外部热源的电缆
简介：이 표준은 외부 열원과 교차하는 모든 전압에 대해, 케이블의 연속 정격 전류 계수를 산출하는 방법을 규정한다. 이 방법은 모든 종류의 케이블에 적용할 수 있다.이 방법은 케이블을 둘러싸는 전체 영역이 일정한 열 특성을 가지며 중첩의 원리가 적용된다고 가정한다. 접촉 케이블에는 중첩의 원리가 엄격하게 적용되지 않으므로 이 표준에 규정한 산출 법은 접촉 케이블에 적용할 경우 최적의 결과를 도출하게 된다.?
信息：ICS：29.060.20 CCS：K13 发布：2014-10-03 实施：2014/10/3

DS/IEC 60287-1-3-2002
简介：This part of IEC 60287 provides a method for calculating the phase currents and circulating current losses in single-core cables arranged in parallel. The method described in this standard can be used for any number of cables per phase in parallel in any physical layout. The phase currents can be calculated for any arrangement of sheath bonding. For the calculation of sheath losses, it is assumed that the sheaths are bonded at both ends. A method for calculating sheath eddy current losses in two circuits in flat formation is given in IEC 60287-1-2.
信息：ICS：29.060.20 CCS：发布：2002-08-09 实施：2002-07-01

简介： 信息：

IEC 60287-1-3:2002 电缆 - 电流额定值的计算 - 第1-3部分:电流额定方程（100％负载因子）和损耗计算 - 并联单芯电缆之间的电流共享和循环电流损耗的计算
简介：
信息：ICS：29.060.20 CCS：发布：2002-05-21 实施：

简介： 信息：

IEC 60287-1-3-2002 Cables Electriques - Calcul Du Courant Admissible - Partie 1-3: Equations De L?Intensite Du Courant Admissible (Facteur De Charge 100%) Et Calcul Des Pertes - Repartition Du Courant Entre Des Cables Unipolaires Disposes En Parallele Et Calcul Des Pertes P
简介：This part of IEC 60287 provides a method for calculating the phase currents and circulating current losses in single-core cables arranged in parallel. The method described in this standard can be used for any number of cables per phase in parallel in any physical layout. The phase currents can be calculated for any arrangement of sheath bonding. For the calculation of sheath losses@ it is assumed that the sheaths are bonded at both ends. A method for calculating sheath eddy current losses in two circuits in flat formation is given in IEC 60287-1-2.?
信息：ICS：/ CCS：/ 发布：2002-05-01 实施：2002-06-03

简介： 信息：

KS C IEC 60287-1-3-2014(2019) 电缆 - 电流额定值的计算 - 第1-3部分:电流额定方程（100％负载因子）和损耗计算 - 并联单芯电缆之间的电流共享和循环电流损耗的计算
简介：
信息：ICS：29.060.20 CCS：发布：2014-10-03 实施：

IEC 60287-1-3-2002 电缆.额定电流的计算.第1-3部分:额定电流方程式(负荷率100%)和损失率的计算.并联单心电缆间电流共享和循环电流损失率的计算
简介：Provides a method for calculating the phase currents and circulating current losses in single-core cables arranged in parallel. The method described in this standard can be used for any number of cables per phase in parallel in any physical layout. The p
信息：ICS：29.060.20 CCS：K13 发布：2002-05 实施：

简介： 信息：

KS C IEC 60287-3-3-2014(2019) 电缆 - 电流额定值的计算 - 第3-3部分:操作条件部分 - 电缆穿过外部热源
简介：
信息：ICS：29.060.20 CCS：发布：2014-10-03 实施：

IEC 60287-3-1-1999 Cables Electriques - Calcul Du Courant Admissible - Partie 3-1: Sections Concernant Les Conditions De Fonctionnement - Conditions De Fonctionnement De Reference Et Selection Du Type De Cable (Edition 1.1 Consolidated Reprint)
简介：This section of IEC 60287-3 is applicable to the conditions of steady-state operation of cables at all alternating voltages@ and direct voltages up to 5 kV@ buried directly in the ground@ in ducts@ troughs or in steel pipes@ both with and without partial drying-out of the soil@ as well as cables in air. The term ??steady state?? is intended to mean a continuous constant current (100 % load factor) just sufficient to produce asymptotically the maximum conductor temperature@ the surrounding ambient conditions being assumed constant. This section concerns reference operating conditions and selection of cable type.
信息：ICS：/ CCS：/ 发布：1999-05-01 实施：2017-06-12

简介： 信息：