IEC61000-4-16检测标准

发布时间:2023-02-04 17:14:31 阅读量: 来源:中析研究所

IEC61000-4-16相关标准参考信息

VDE 0847-4-16-2016 Electromagnetic compatibility (EMC) - Part 4-16: Testing and measurement techniques - Test for immunity to conducted@ common mode disturbances in the frequency range 0 Hz to 150 kHz (IEC 61000-4-16:2015); German version EN 61000-4-16:2016
简介:
信息:ICS:/ CCS:/ 发布:2016-10-01 实施:2016-09-29

VDE 0847-4-16-2016 Electromagnetic compatibility (EMC) - Part 4-16: Testing and measurement techniques - Test for immunity to conducted@ common mode disturbances in the frequency range 0 Hz to 150 kHz (IEC 61000-4-16:2015); German version EN 61000-4-16:2016
简介:
信息:ICS:/ CCS:/ 发布:2016-10-01 实施:2016-09-29

VDE 0847-4-16-2016 Electromagnetic compatibility (EMC) - Part 4-16: Testing and measurement techniques - Test for immunity to conducted@ common mode disturbances in the frequency range 0 Hz to 150 kHz (IEC 61000-4-16:2015); German version EN 61000-4-16:2016
简介:
信息:ICS:/ CCS:/ 发布:2016-10-01 实施:2016-09-29

DIN EN 61000-4-16-2016 电磁兼容性(EMC).第4-16部分:试验和测量技术.抗扰度试验,频段为0 Hz至150 kHz(IEC 61000-4-16-2015)中的通用模式干扰.德文版本EN 61000-4-16-2016
简介:
信息:ICS:33.100.20 CCS:L06 发布:2016-10 实施

DIN EN 61000-4-16-2016 电磁兼容性(EMC).第4-16部分:试验和测量技术.抗扰度试验,频段为0 Hz至150 kHz(IEC 61000-4-16-2015)中的通用模式干扰.德文版本EN 61000-4-16-2016
简介:
信息:ICS:33.100.20 CCS:L06 发布:2016-10 实施

DIN EN 61000-4-16-2016 电磁兼容性(EMC).第4-16部分:试验和测量技术.抗扰度试验,频段为0 Hz至150 kHz(IEC 61000-4-16-2015)中的通用模式干扰.德文版本EN 61000-4-16-2016
简介:
信息:ICS:33.100.20 CCS:L06 发布:2016-10 实施

IEC 61000-4-16:2015 电磁兼容性(emc) - 第4-16部分:测试和测量技术 - 传导抗扰度测试 频率范围内的共模故障0 Hz至150 Khz
简介:
信息:ICS:33.100.20 CCS发布:2015-12-09 实施

IEC 61000-4-16:2015 电磁兼容性(emc) - 第4-16部分:测试和测量技术 - 传导抗扰度测试 频率范围内的共模故障0 Hz至150 Khz
简介:
信息:ICS:33.100.20 CCS发布:2015-12-09 实施

IEC 61000-4-16:2015 电磁兼容性(emc) - 第4-16部分:测试和测量技术 - 传导抗扰度测试 频率范围内的共模故障0 Hz至150 Khz
简介:
信息:ICS:33.100.20 CCS发布:2015-12-09 实施

IEC 61000-4-16-2015 RLV 电磁兼容性(EMC).第4-16部分:试验和测量技术.频率范围为0 Hz至150 kHz的传导共模干扰抗扰度试验
简介:
信息:ICS:33.100.20 CCS发布:2015-12-09 实施

IEC 61000-4-16-2015 RLV 电磁兼容性(EMC).第4-16部分:试验和测量技术.频率范围为0 Hz至150 kHz的传导共模干扰抗扰度试验
简介:
信息:ICS:33.100.20 CCS发布:2015-12-09 实施

IEC 61000-4-16-2015 RLV 电磁兼容性(EMC).第4-16部分:试验和测量技术.频率范围为0 Hz至150 kHz的传导共模干扰抗扰度试验
简介:
信息:ICS:33.100.20 CCS发布:2015-12-09 实施

IEC 61000-4-16:2015 RLV 电磁兼容性(EMC).第4-16部分:试验和测量技术.频率范围为0 Hz至150 kHz的传导共模干扰抗扰度试验
简介:
信息:ICS:33.100.20 CCS发布:2015-12-09 实施

IEC 61000-4-16:2015 RLV 电磁兼容性(EMC).第4-16部分:试验和测量技术.频率范围为0 Hz至150 kHz的传导共模干扰抗扰度试验
简介:
信息:ICS:33.100.20 CCS发布:2015-12-09 实施

IEC 61000-4-16:2015 RLV 电磁兼容性(EMC).第4-16部分:试验和测量技术.频率范围为0 Hz至150 kHz的传导共模干扰抗扰度试验
简介:
信息:ICS:33.100.20 CCS发布:2015-12-09 实施

IEC 61000-4-16-2015 电磁兼容性(emc) - 第4-16部分:测试和测量技术 - 传导抗扰度测试 频率范围内的共模故障0 Hz至150 Khz
简介:
信息:ICS:33.100.20 CCS发布:2015-12-09 实施

IEC 61000-4-16-2015 电磁兼容性(emc) - 第4-16部分:测试和测量技术 - 传导抗扰度测试 频率范围内的共模故障0 Hz至150 Khz
简介:
信息:ICS:33.100.20 CCS发布:2015-12-09 实施

IEC 61000-4-16-2015 电磁兼容性(emc) - 第4-16部分:测试和测量技术 - 传导抗扰度测试 频率范围内的共模故障0 Hz至150 Khz
简介:
信息:ICS:33.100.20 CCS发布:2015-12-09 实施

IEC 61000-4-16 (REDLINE + STANDARD)-2015
简介:This part of IEC 61000 relates to the immunity requirements and test methods for electrical and electronic equipment to conducted@ common mode disturbances in the range d.c. to 150 kHz. The object of this standard is to establish a common and reproducible basis for testing electrical and electronic equipment with the application of common mode disturbances to power supply@ control@ signal and communication ports. This standard defines ? test voltage and current waveform; ? range of test levels; ? test equipment; ? test set-up; ? test procedures. For some types of ports@ for example ports intended to be used with highly balanced lines@ additional test provisions may be established by product committee specifications. The test is intended to demonstrate the immunity of electrical and electronic equipment when subjected to conducted@ common mode disturbances such as those originating from power line currents and return leakage currents in the earthing/grounding system. The disturbances produced by 400 Hz mains systems are not included in the scope of this standard. Actual interference due to these disturbance phenomena is relatively rare@ except in industrial plants. Product committees should therefore consider whether there is a justification for applying this standard in their product/product family standards (see also Clause 4). This test is not relevant for equipment ports intended to be connected to short cables@ having a length less than 20 m or less. The immunity to harmonics and interharmonics@ including mains signalling@ on a.c. power ports (in differential mode) is not included in the scope of this standard and is covered by IEC 61000-4-13 and IEC 61000-4-19. The immunity to conducted disturbances generated by intentional radio-frequency transmitters is not included in the scope of this standard and is covered by IEC 61000-4-6.
信息:ICS:/ CCS:/ 发布:2015-12-01 实施:2015-12-11

IEC 61000-4-16 (REDLINE + STANDARD)-2015
简介:This part of IEC 61000 relates to the immunity requirements and test methods for electrical and electronic equipment to conducted@ common mode disturbances in the range d.c. to 150 kHz. The object of this standard is to establish a common and reproducible basis for testing electrical and electronic equipment with the application of common mode disturbances to power supply@ control@ signal and communication ports. This standard defines ? test voltage and current waveform; ? range of test levels; ? test equipment; ? test set-up; ? test procedures. For some types of ports@ for example ports intended to be used with highly balanced lines@ additional test provisions may be established by product committee specifications. The test is intended to demonstrate the immunity of electrical and electronic equipment when subjected to conducted@ common mode disturbances such as those originating from power line currents and return leakage currents in the earthing/grounding system. The disturbances produced by 400 Hz mains systems are not included in the scope of this standard. Actual interference due to these disturbance phenomena is relatively rare@ except in industrial plants. Product committees should therefore consider whether there is a justification for applying this standard in their product/product family standards (see also Clause 4). This test is not relevant for equipment ports intended to be connected to short cables@ having a length less than 20 m or less. The immunity to harmonics and interharmonics@ including mains signalling@ on a.c. power ports (in differential mode) is not included in the scope of this standard and is covered by IEC 61000-4-13 and IEC 61000-4-19. The immunity to conducted disturbances generated by intentional radio-frequency transmitters is not included in the scope of this standard and is covered by IEC 61000-4-6.
信息:ICS:/ CCS:/ 发布:2015-12-01 实施:2015-12-11

IEC 61000-4-16 (REDLINE + STANDARD)-2015
简介:This part of IEC 61000 relates to the immunity requirements and test methods for electrical and electronic equipment to conducted@ common mode disturbances in the range d.c. to 150 kHz. The object of this standard is to establish a common and reproducible basis for testing electrical and electronic equipment with the application of common mode disturbances to power supply@ control@ signal and communication ports. This standard defines ? test voltage and current waveform; ? range of test levels; ? test equipment; ? test set-up; ? test procedures. For some types of ports@ for example ports intended to be used with highly balanced lines@ additional test provisions may be established by product committee specifications. The test is intended to demonstrate the immunity of electrical and electronic equipment when subjected to conducted@ common mode disturbances such as those originating from power line currents and return leakage currents in the earthing/grounding system. The disturbances produced by 400 Hz mains systems are not included in the scope of this standard. Actual interference due to these disturbance phenomena is relatively rare@ except in industrial plants. Product committees should therefore consider whether there is a justification for applying this standard in their product/product family standards (see also Clause 4). This test is not relevant for equipment ports intended to be connected to short cables@ having a length less than 20 m or less. The immunity to harmonics and interharmonics@ including mains signalling@ on a.c. power ports (in differential mode) is not included in the scope of this standard and is covered by IEC 61000-4-13 and IEC 61000-4-19. The immunity to conducted disturbances generated by intentional radio-frequency transmitters is not included in the scope of this standard and is covered by IEC 61000-4-6.
信息:ICS:/ CCS:/ 发布:2015-12-01 实施:2015-12-11

VDE 0847-4-16/A3-2015 Electromagnetic compatibility (EMC) - Part 4-16: Testing and measurement techniques - Test for immunity to conducted@ common mode disturbances in the frequency range 0 Hz to 150 kHz (IEC 77A/876/CDV:2015); German version EN 61000-4-16:1998/FprA3:2015
简介:
信息:ICS:/ CCS:/ 发布:2015-07-01 实施:2016-09-29

VDE 0847-4-16/A3-2015 Electromagnetic compatibility (EMC) - Part 4-16: Testing and measurement techniques - Test for immunity to conducted@ common mode disturbances in the frequency range 0 Hz to 150 kHz (IEC 77A/876/CDV:2015); German version EN 61000-4-16:1998/FprA3:2015
简介:
信息:ICS:/ CCS:/ 发布:2015-07-01 实施:2016-09-29

VDE 0847-4-16/A3-2015 Electromagnetic compatibility (EMC) - Part 4-16: Testing and measurement techniques - Test for immunity to conducted@ common mode disturbances in the frequency range 0 Hz to 150 kHz (IEC 77A/876/CDV:2015); German version EN 61000-4-16:1998/FprA3:2015
简介:
信息:ICS:/ CCS:/ 发布:2015-07-01 实施:2016-09-29

KS C IEC 61000-4-16-2013 电磁兼容性(EMC).第4-16部分:试验和测量技术.导电抗扰试验、0Hz.150Hz频率范围分布的普通模块
简介:이 표준은 전기ㆍ전자 기기의 직류∼150 kHz의 범위에서 전도성, 공통 모드 방해에 대한 내성 요건및 시험방법과 관계가 있다.이 표준의 목적은 전기ㆍ전자 기기의 전원 공급, 제어, 신호 및 통신 포트에 대하여 공통 모드 방해를 적용하고자 할 때 공통적이며 재현성 있는 시험의 기초를 확립하고자 하는 것이다.이 표준은 다음 사항을 정의한다.-시험 전압 및 전류 파형-시험 레벨의 범위-시험 기기-시험 배치-시험 절차예를 들어 고도의 평형 선로가 사용되도록 의도된 포트와 같은 몇몇 종류의 포트에 대하여, 추가적인 시험 조항이 제품 위원회의 사양에 의해 규정될 수도 있다.시험은 전원선 전류 및 접지 체계의 복귀 누설 전류로부터 발생된 전도성, 공통 모드 방해에 노출되었을 때, 전기ㆍ전자 기기의 내성을 증명하기 위한 것이다.400 Hz 전원 계통에서 만들어진 방해는 이 표준의 적용범위에 포함되지 않는다.이러한 방해 현상들로 인한 실제 장해는 산업 공장의 경우를 제외하고는 상대적으로 드물다. 그러므로 제품 위원회는 제품 표준/제품군 표준에서 이 표준을 적용하기 위한 타당성이 있는지를 고려하여야 한다(3. 또한 참조할 것).이 시험은 길이가 20 m 미만의 짧은 케이블로 연결되는 장비의 포트에는 적절하지 않다.교류 전원 포트에서 주전원 신호를 포함하는 고조파와 내부 고조파, 저주파내성
信息:ICS:33.100.20 CCS:L06 发布:2013-07-10 实施:2013-07-10

KS C IEC 61000-4-16-2013 电磁兼容性(EMC).第4-16部分:试验和测量技术.导电抗扰试验、0Hz.150Hz频率范围分布的普通模块
简介:이 표준은 전기ㆍ전자 기기의 직류∼150 kHz의 범위에서 전도성, 공통 모드 방해에 대한 내성 요건및 시험방법과 관계가 있다.이 표준의 목적은 전기ㆍ전자 기기의 전원 공급, 제어, 신호 및 통신 포트에 대하여 공통 모드 방해를 적용하고자 할 때 공통적이며 재현성 있는 시험의 기초를 확립하고자 하는 것이다.이 표준은 다음 사항을 정의한다.-시험 전압 및 전류 파형-시험 레벨의 범위-시험 기기-시험 배치-시험 절차예를 들어 고도의 평형 선로가 사용되도록 의도된 포트와 같은 몇몇 종류의 포트에 대하여, 추가적인 시험 조항이 제품 위원회의 사양에 의해 규정될 수도 있다.시험은 전원선 전류 및 접지 체계의 복귀 누설 전류로부터 발생된 전도성, 공통 모드 방해에 노출되었을 때, 전기ㆍ전자 기기의 내성을 증명하기 위한 것이다.400 Hz 전원 계통에서 만들어진 방해는 이 표준의 적용범위에 포함되지 않는다.이러한 방해 현상들로 인한 실제 장해는 산업 공장의 경우를 제외하고는 상대적으로 드물다. 그러므로 제품 위원회는 제품 표준/제품군 표준에서 이 표준을 적용하기 위한 타당성이 있는지를 고려하여야 한다(3. 또한 참조할 것).이 시험은 길이가 20 m 미만의 짧은 케이블로 연결되는 장비의 포트에는 적절하지 않다.교류 전원 포트에서 주전원 신호를 포함하는 고조파와 내부 고조파, 저주파내성
信息:ICS:33.100.20 CCS:L06 发布:2013-07-10 实施:2013-07-10

KS C IEC 61000-4-16-2013 电磁兼容性(EMC).第4-16部分:试验和测量技术.导电抗扰试验、0Hz.150Hz频率范围分布的普通模块
简介:이 표준은 전기ㆍ전자 기기의 직류∼150 kHz의 범위에서 전도성, 공통 모드 방해에 대한 내성 요건및 시험방법과 관계가 있다.이 표준의 목적은 전기ㆍ전자 기기의 전원 공급, 제어, 신호 및 통신 포트에 대하여 공통 모드 방해를 적용하고자 할 때 공통적이며 재현성 있는 시험의 기초를 확립하고자 하는 것이다.이 표준은 다음 사항을 정의한다.-시험 전압 및 전류 파형-시험 레벨의 범위-시험 기기-시험 배치-시험 절차예를 들어 고도의 평형 선로가 사용되도록 의도된 포트와 같은 몇몇 종류의 포트에 대하여, 추가적인 시험 조항이 제품 위원회의 사양에 의해 규정될 수도 있다.시험은 전원선 전류 및 접지 체계의 복귀 누설 전류로부터 발생된 전도성, 공통 모드 방해에 노출되었을 때, 전기ㆍ전자 기기의 내성을 증명하기 위한 것이다.400 Hz 전원 계통에서 만들어진 방해는 이 표준의 적용범위에 포함되지 않는다.이러한 방해 현상들로 인한 실제 장해는 산업 공장의 경우를 제외하고는 상대적으로 드물다. 그러므로 제품 위원회는 제품 표준/제품군 표준에서 이 표준을 적용하기 위한 타당성이 있는지를 고려하여야 한다(3. 또한 참조할 것).이 시험은 길이가 20 m 미만의 짧은 케이블로 연결되는 장비의 포트에는 적절하지 않다.교류 전원 포트에서 주전원 신호를 포함하는 고조파와 내부 고조파, 저주파내성
信息:ICS:33.100.20 CCS:L06 发布:2013-07-10 实施:2013-07-10

KS C IEC 61000-4-16-2013 电磁兼容性(EMC).第4-16部分:试验和测量技术.导电抗扰试验、0Hz.150Hz频率范围分布的普通模块
简介:이 표준은 전기ㆍ전자 기기의 직류∼150 kHz의 범위에서 전도성, 공통 모드 방해에 대한 내성 요건및 시험방법과 관계가 있다.이 표준의 목적은 전기ㆍ전자 기기의 전원 공급, 제어, 신호 및 통신 포트에 대하여 공통 모드 방해를 적용하고자 할 때 공통적이며 재현성 있는 시험의 기초를 확립하고자 하는 것이다.이 표준은 다음 사항을 정의한다.-시험 전압 및 전류 파형-시험 레벨의 범위-시험 기기-시험 배치-시험 절차예를 들어 고도의 평형 선로가 사용되도록 의도된 포트와 같은 몇몇 종류의 포트에 대하여, 추가적인 시험 조항이 제품 위원회의 사양에 의해 규정될 수도 있다.시험은 전원선 전류 및 접지 체계의 복귀 누설 전류로부터 발생된 전도성, 공통 모드 방해에 노출되었을 때, 전기ㆍ전자 기기의 내성을 증명하기 위한 것이다.400 Hz 전원 계통에서 만들어진 방해는 이 표준의 적용범위에 포함되지 않는다.이러한 방해 현상들로 인한 실제 장해는 산업 공장의 경우를 제외하고는 상대적으로 드물다. 그러므로 제품 위원회는 제품 표준/제품군 표준에서 이 표준을 적용하기 위한 타당성이 있는지를 고려하여야 한다(3. 또한 참조할 것).이 시험은 길이가 20 m 미만의 짧은 케이블로 연결되는 장비의 포트에는 적절하지 않다.교류 전원 포트에서 주전원 신호를 포함하는 고조파와 내부 고조파, 저주파내성
信息:ICS:33.100.20 CCS:L06 发布:2013-07-10 实施:2013-07-10

KS C IEC 61000-4-16-2013 电磁兼容性(EMC).第4-16部分:试验和测量技术.导电抗扰试验、0Hz.150Hz频率范围分布的普通模块
简介:이 표준은 전기ㆍ전자 기기의 직류∼150 kHz의 범위에서 전도성, 공통 모드 방해에 대한 내성 요건및 시험방법과 관계가 있다.이 표준의 목적은 전기ㆍ전자 기기의 전원 공급, 제어, 신호 및 통신 포트에 대하여 공통 모드 방해를 적용하고자 할 때 공통적이며 재현성 있는 시험의 기초를 확립하고자 하는 것이다.이 표준은 다음 사항을 정의한다.-시험 전압 및 전류 파형-시험 레벨의 범위-시험 기기-시험 배치-시험 절차예를 들어 고도의 평형 선로가 사용되도록 의도된 포트와 같은 몇몇 종류의 포트에 대하여, 추가적인 시험 조항이 제품 위원회의 사양에 의해 규정될 수도 있다.시험은 전원선 전류 및 접지 체계의 복귀 누설 전류로부터 발생된 전도성, 공통 모드 방해에 노출되었을 때, 전기ㆍ전자 기기의 내성을 증명하기 위한 것이다.400 Hz 전원 계통에서 만들어진 방해는 이 표준의 적용범위에 포함되지 않는다.이러한 방해 현상들로 인한 실제 장해는 산업 공장의 경우를 제외하고는 상대적으로 드물다. 그러므로 제품 위원회는 제품 표준/제품군 표준에서 이 표준을 적용하기 위한 타당성이 있는지를 고려하여야 한다(3. 또한 참조할 것).이 시험은 길이가 20 m 미만의 짧은 케이블로 연결되는 장비의 포트에는 적절하지 않다.교류 전원 포트에서 주전원 신호를 포함하는 고조파와 내부 고조파, 저주파내성
信息:ICS:33.100.20 CCS:L06 发布:2013-07-10 实施:2013-07-10

KS C IEC 61000-4-16-2013 电磁兼容性(EMC).第4-16部分:试验和测量技术.导电抗扰试验、0Hz.150Hz频率范围分布的普通模块
简介:이 표준은 전기ㆍ전자 기기의 직류∼150 kHz의 범위에서 전도성, 공통 모드 방해에 대한 내성 요건및 시험방법과 관계가 있다.이 표준의 목적은 전기ㆍ전자 기기의 전원 공급, 제어, 신호 및 통신 포트에 대하여 공통 모드 방해를 적용하고자 할 때 공통적이며 재현성 있는 시험의 기초를 확립하고자 하는 것이다.이 표준은 다음 사항을 정의한다.-시험 전압 및 전류 파형-시험 레벨의 범위-시험 기기-시험 배치-시험 절차예를 들어 고도의 평형 선로가 사용되도록 의도된 포트와 같은 몇몇 종류의 포트에 대하여, 추가적인 시험 조항이 제품 위원회의 사양에 의해 규정될 수도 있다.시험은 전원선 전류 및 접지 체계의 복귀 누설 전류로부터 발생된 전도성, 공통 모드 방해에 노출되었을 때, 전기ㆍ전자 기기의 내성을 증명하기 위한 것이다.400 Hz 전원 계통에서 만들어진 방해는 이 표준의 적용범위에 포함되지 않는다.이러한 방해 현상들로 인한 실제 장해는 산업 공장의 경우를 제외하고는 상대적으로 드물다. 그러므로 제품 위원회는 제품 표준/제품군 표준에서 이 표준을 적용하기 위한 타당성이 있는지를 고려하여야 한다(3. 또한 참조할 것).이 시험은 길이가 20 m 미만의 짧은 케이블로 연결되는 장비의 포트에는 적절하지 않다.교류 전원 포트에서 주전원 신호를 포함하는 고조파와 내부 고조파, 저주파내성
信息:ICS:33.100.20 CCS:L06 发布:2013-07-10 实施:2013-07-10

KS C IEC 61000-4-16-2013(2018) 电磁兼容性第4-16部分:试验和测量技术0 Hz至150 kHz频率范围内传导共模干扰抗扰度试验
简介:
信息:ICS:33.100.20 CCS发布:2013-07-10 实施

KS C IEC 61000-4-16-2013(2018) 电磁兼容性第4-16部分:试验和测量技术0 Hz至150 kHz频率范围内传导共模干扰抗扰度试验
简介:
信息:ICS:33.100.20 CCS发布:2013-07-10 实施

KS C IEC 61000-4-16-2013(2018) 电磁兼容性第4-16部分:试验和测量技术0 Hz至150 kHz频率范围内传导共模干扰抗扰度试验
简介:
信息:ICS:33.100.20 CCS发布:2013-07-10 实施

VDE 0847-4-16-2011 Electromagnetic Compatibility (EMC) - Part 4-16: Testing and measurement techniques - Test for immunity to conducted@ common mode disturbances in the frequency range 0 Hz to 150 kHz (IEC 61000-4-16:1998 + A1:2001 + A2:2009); German version EN 61000-4-16:1
简介:
信息:ICS:/ CCS:/ 发布:2011-09-01 实施:2016-09-29

VDE 0847-4-16-2011 Electromagnetic Compatibility (EMC) - Part 4-16: Testing and measurement techniques - Test for immunity to conducted@ common mode disturbances in the frequency range 0 Hz to 150 kHz (IEC 61000-4-16:1998 + A1:2001 + A2:2009); German version EN 61000-4-16:1
简介:
信息:ICS:/ CCS:/ 发布:2011-09-01 实施:2016-09-29

VDE 0847-4-16-2011 Electromagnetic Compatibility (EMC) - Part 4-16: Testing and measurement techniques - Test for immunity to conducted@ common mode disturbances in the frequency range 0 Hz to 150 kHz (IEC 61000-4-16:1998 + A1:2001 + A2:2009); German version EN 61000-4-16:1
简介:
信息:ICS:/ CCS:/ 发布:2011-09-01 实施:2016-09-29

DIN EN 61000-4-16-2011 电磁兼容性(EMC).第4-16部分:试验和测量技术.抗扰度试验,频段为0 Hz至150 kHz (IEC 61000-4-16-1998 + A1-2001 + A2-2009)中的通用模式干扰;德文版本EN 61000-4-16:1
简介:
信息:ICS:33.100.20 CCS:L06 发布:2011-09 实施:2011-09-01

DIN EN 61000-4-16-2011 电磁兼容性(EMC).第4-16部分:试验和测量技术.抗扰度试验,频段为0 Hz至150 kHz (IEC 61000-4-16-1998 + A1-2001 + A2-2009)中的通用模式干扰;德文版本EN 61000-4-16:1
简介:
信息:ICS:33.100.20 CCS:L06 发布:2011-09 实施:2011-09-01

DIN EN 61000-4-16-2011 电磁兼容性(EMC).第4-16部分:试验和测量技术.抗扰度试验,频段为0 Hz至150 kHz (IEC 61000-4-16-1998 + A1-2001 + A2-2009)中的通用模式干扰;德文版本EN 61000-4-16:1
简介:
信息:ICS:33.100.20 CCS:L06 发布:2011-09 实施:2011-09-01

IEC 61000-4-16:1998+AMD1:2001+AMD2:2009 CSV 电磁兼容性(EMC).第4-16部分:试验和测量技术.频率范围为0 Hz至150 kHz的传导共模干扰抗扰度试验
简介:
信息:ICS:33.100.20 CCS发布:2011-05-11 实施

IEC 61000-4-16:1998+AMD1:2001+AMD2:2009 CSV 电磁兼容性(EMC).第4-16部分:试验和测量技术.频率范围为0 Hz至150 kHz的传导共模干扰抗扰度试验
简介:
信息:ICS:33.100.20 CCS发布:2011-05-11 实施

IEC 61000-4-16:1998+AMD1:2001+AMD2:2009 CSV 电磁兼容性(EMC).第4-16部分:试验和测量技术.频率范围为0 Hz至150 kHz的传导共模干扰抗扰度试验
简介:
信息:ICS:33.100.20 CCS发布:2011-05-11 实施

IEC 61000-4-16-1998+AMD1-2001+AMD2-2009 CSV 电磁兼容性(EMC).第4-16部分:试验和测量技术.频率范围为0 Hz至150 kHz的传导共模干扰抗扰度试验
简介:
信息:ICS:33.100.20 CCS发布:2011-05-11 实施

IEC 61000-4-16-1998+AMD1-2001+AMD2-2009 CSV 电磁兼容性(EMC).第4-16部分:试验和测量技术.频率范围为0 Hz至150 kHz的传导共模干扰抗扰度试验
简介:
信息:ICS:33.100.20 CCS发布:2011-05-11 实施

IEC 61000-4-16-1998+AMD1-2001+AMD2-2009 CSV 电磁兼容性(EMC).第4-16部分:试验和测量技术.频率范围为0 Hz至150 kHz的传导共模干扰抗扰度试验
简介:
信息:ICS:33.100.20 CCS发布:2011-05-11 实施

IEC 61000-4-16-2011 Electromagnetic compatibility (EMC) – Part 4-16: Testing and measurement techniques – Test for immunity to conducted@ common mode disturbances in the frequency range 0 Hz to 150 kHz (Edition 1.2; Consolidated Reprint)
简介:This part of IEC 61000 relates to the immunity requirements and test methods for electrical and electronic equipment to conducted@ common mode disturbances in the range d.c. to 150 kHz. The object of this standard is to establish a common and reproducible basis for testing electrical and electronic equipment with the application of common mode disturbances to power supply@ control@ signal and communication ports. This standard defines ?C test voltage and current waveform; ?C range of test levels; ?C test equipment; ?C test set-up; ?C test procedures. For some types of ports@ for example ports intended to be used with highly balanced lines@ additional test provisions may be established by product committee specifications. The test is intended to demonstrate the immunity of electrical and electronic equipment when subjected to conducted@ common mode disturbances such as those originating from power line currents and return leakage currents in the earthing/grounding system. The disturbances produced by 400 Hz mains systems are not included in the scope of this standard. Actual interference due to these disturbance phenomena is relatively rare@ except in industrial plants. Product Committees should therefore consider whether there is a justification for applying this standard in their Product/Product Family standards (see also clause 3). This test is not relevant for equipment ports intended to be connected to short cables@ having a length less than 20 m or less. The immunity to harmonics and interharmonics@ including mains signalling@ on a.c. power ports (in differential mode) is not included in the scope of this standard and is covered by IEC 61000-4-13. The immunity to conducted disturbances generated by intentional radio-frequency transmitters is not included in the scope of this standard and is covered by IEC 61000-4-6.
信息:ICS:/ CCS:/ 发布:2011-05-01 实施:2015-12-11

IEC 61000-4-16-2011 Electromagnetic compatibility (EMC) – Part 4-16: Testing and measurement techniques – Test for immunity to conducted@ common mode disturbances in the frequency range 0 Hz to 150 kHz (Edition 1.2; Consolidated Reprint)
简介:This part of IEC 61000 relates to the immunity requirements and test methods for electrical and electronic equipment to conducted@ common mode disturbances in the range d.c. to 150 kHz. The object of this standard is to establish a common and reproducible basis for testing electrical and electronic equipment with the application of common mode disturbances to power supply@ control@ signal and communication ports. This standard defines ?C test voltage and current waveform; ?C range of test levels; ?C test equipment; ?C test set-up; ?C test procedures. For some types of ports@ for example ports intended to be used with highly balanced lines@ additional test provisions may be established by product committee specifications. The test is intended to demonstrate the immunity of electrical and electronic equipment when subjected to conducted@ common mode disturbances such as those originating from power line currents and return leakage currents in the earthing/grounding system. The disturbances produced by 400 Hz mains systems are not included in the scope of this standard. Actual interference due to these disturbance phenomena is relatively rare@ except in industrial plants. Product Committees should therefore consider whether there is a justification for applying this standard in their Product/Product Family standards (see also clause 3). This test is not relevant for equipment ports intended to be connected to short cables@ having a length less than 20 m or less. The immunity to harmonics and interharmonics@ including mains signalling@ on a.c. power ports (in differential mode) is not included in the scope of this standard and is covered by IEC 61000-4-13. The immunity to conducted disturbances generated by intentional radio-frequency transmitters is not included in the scope of this standard and is covered by IEC 61000-4-6.
信息:ICS:/ CCS:/ 发布:2011-05-01 实施:2015-12-11

IEC 61000-4-16-2011 Electromagnetic compatibility (EMC) – Part 4-16: Testing and measurement techniques – Test for immunity to conducted@ common mode disturbances in the frequency range 0 Hz to 150 kHz (Edition 1.2; Consolidated Reprint)
简介:This part of IEC 61000 relates to the immunity requirements and test methods for electrical and electronic equipment to conducted@ common mode disturbances in the range d.c. to 150 kHz. The object of this standard is to establish a common and reproducible basis for testing electrical and electronic equipment with the application of common mode disturbances to power supply@ control@ signal and communication ports. This standard defines ?C test voltage and current waveform; ?C range of test levels; ?C test equipment; ?C test set-up; ?C test procedures. For some types of ports@ for example ports intended to be used with highly balanced lines@ additional test provisions may be established by product committee specifications. The test is intended to demonstrate the immunity of electrical and electronic equipment when subjected to conducted@ common mode disturbances such as those originating from power line currents and return leakage currents in the earthing/grounding system. The disturbances produced by 400 Hz mains systems are not included in the scope of this standard. Actual interference due to these disturbance phenomena is relatively rare@ except in industrial plants. Product Committees should therefore consider whether there is a justification for applying this standard in their Product/Product Family standards (see also clause 3). This test is not relevant for equipment ports intended to be connected to short cables@ having a length less than 20 m or less. The immunity to harmonics and interharmonics@ including mains signalling@ on a.c. power ports (in differential mode) is not included in the scope of this standard and is covered by IEC 61000-4-13. The immunity to conducted disturbances generated by intentional radio-frequency transmitters is not included in the scope of this standard and is covered by IEC 61000-4-6.
信息:ICS:/ CCS:/ 发布:2011-05-01 实施:2015-12-11

IEC 61000-4-16 Edition 1.2-2011 电磁兼容性(EMC).第4-16部分:试验和测量技术.频率范围为0 Hz 至150 kKz内进行的共模干扰抗扰试验
简介:
信息:ICS:33.100.20 CCS:L06 发布:2011-05 实施

IEC 61000-4-16 Edition 1.2-2011 电磁兼容性(EMC).第4-16部分:试验和测量技术.频率范围为0 Hz 至150 kKz内进行的共模干扰抗扰试验
简介:
信息:ICS:33.100.20 CCS:L06 发布:2011-05 实施

IEC 61000-4-16 Edition 1.2-2011 电磁兼容性(EMC).第4-16部分:试验和测量技术.频率范围为0 Hz 至150 kKz内进行的共模干扰抗扰试验
简介:
信息:ICS:33.100.20 CCS:L06 发布:2011-05 实施

VDE 0847-4-14-2010 Electromagnetic compatibility (EMC) - Part 4-14: Testing and measurement techniques - Voltage fluctuation immunity test for equipment with input current not exceeding 16 A per phase (IEC 61000-4-14:1999 + A1:2001 + A2:2009); German version EN 61000-4-14:1
简介:
信息:ICS:/ CCS:/ 发布:2010-04-01 实施:2016-06-25

VDE 0847-4-14-2010 Electromagnetic compatibility (EMC) - Part 4-14: Testing and measurement techniques - Voltage fluctuation immunity test for equipment with input current not exceeding 16 A per phase (IEC 61000-4-14:1999 + A1:2001 + A2:2009); German version EN 61000-4-14:1
简介:
信息:ICS:/ CCS:/ 发布:2010-04-01 实施:2016-06-25

VDE 0847-4-14-2010 Electromagnetic compatibility (EMC) - Part 4-14: Testing and measurement techniques - Voltage fluctuation immunity test for equipment with input current not exceeding 16 A per phase (IEC 61000-4-14:1999 + A1:2001 + A2:2009); German version EN 61000-4-14:1
简介:
信息:ICS:/ CCS:/ 发布:2010-04-01 实施:2016-06-25

VDE 0847-4-34-2010 Electromagnetic compatibility (EMC) - Part 4-34: Testing and measurement techniques - Voltage dips@ short interruptions and voltage variations immunity tests for equipment with mains current more than 16 A per phase (IEC 61000-4-34:2005 + A1:2009 + Cor. :
简介:
信息:ICS:/ CCS:/ 发布:2010-04-01 实施:2016-06-25

VDE 0847-4-34-2010 Electromagnetic compatibility (EMC) - Part 4-34: Testing and measurement techniques - Voltage dips@ short interruptions and voltage variations immunity tests for equipment with mains current more than 16 A per phase (IEC 61000-4-34:2005 + A1:2009 + Cor. :
简介:
信息:ICS:/ CCS:/ 发布:2010-04-01 实施:2016-06-25

VDE 0847-4-34-2010 Electromagnetic compatibility (EMC) - Part 4-34: Testing and measurement techniques - Voltage dips@ short interruptions and voltage variations immunity tests for equipment with mains current more than 16 A per phase (IEC 61000-4-34:2005 + A1:2009 + Cor. :
简介:
信息:ICS:/ CCS:/ 发布:2010-04-01 实施:2016-06-25

VDE 0847-4-27-2009 Electromagnetic compatibility (EMC) - Part 4-27: Testing and measurement techniques - Unbalance@ immunity test for equipment with input current not exceeding 16 A per phase (IEC 61000-4-27:2000 + A1:2009); German version EN 61000-4-27:2000 + A1:2009
简介:
信息:ICS:/ CCS:/ 发布:2009-12-01 实施:2016-06-25

VDE 0847-4-27-2009 Electromagnetic compatibility (EMC) - Part 4-27: Testing and measurement techniques - Unbalance@ immunity test for equipment with input current not exceeding 16 A per phase (IEC 61000-4-27:2000 + A1:2009); German version EN 61000-4-27:2000 + A1:2009
简介:
信息:ICS:/ CCS:/ 发布:2009-12-01 实施:2016-06-25

VDE 0847-4-27-2009 Electromagnetic compatibility (EMC) - Part 4-27: Testing and measurement techniques - Unbalance@ immunity test for equipment with input current not exceeding 16 A per phase (IEC 61000-4-27:2000 + A1:2009); German version EN 61000-4-27:2000 + A1:2009
简介:
信息:ICS:/ CCS:/ 发布:2009-12-01 实施:2016-06-25

检测标准 IEC61000-4-16检测标准

检测资质

权威认证,确保检测数据的准确性和可靠性

CMA认证

CMA认证

中国计量认证

CNAS认证

CNAS认证

中国合格评定国家认可委员会

ISO认证

ISO认证

质量管理体系认证

行业资质

行业资质

多项行业权威认证

了解我们

专业团队,丰富经验,为您提供优质的检测服务

了解我们 了解我们 了解我们 了解我们 了解我们 了解我们 了解我们 了解我们 了解我们 了解我们

先进检测设备

引进国际先进仪器设备,确保检测数据的准确性和可靠性

精密检测仪器

精密光谱分析仪

用于材料成分分析和元素检测,精度可达ppm级别

色谱分析仪器

高效液相色谱仪

用于食品安全检测和化学成分分析,分离效率高

材料测试设备

万能材料试验机

用于材料力学性能测试,可进行拉伸、压缩等多种测试

热分析仪器

差示扫描量热仪

用于材料热性能分析,测量相变温度和热焓变化

显微镜设备

扫描电子显微镜

用于材料微观结构观察,分辨率可达纳米级别

环境检测设备

气相色谱质谱联用仪

用于复杂有机化合物的分离和鉴定,灵敏度高

我们的优势

选择中科光析,选择专业与信赖

权威资质

具备CMA、CNAS等多项国家级资质认证,检测报告具有法律效力

先进设备

引进国际先进检测设备,确保检测数据的准确性和可靠性

专业团队

拥有经验丰富的检测工程师和技术专家团队

快速响应

7×24小时服务热线,快速响应客户需求,及时出具检测报告

需要专业检测服务?

我们的专业技术团队随时为您提供咨询和服务支持,欢迎随时联系我们

在线咨询工程师

定制实验方案

24小时专业客服在线

需要检测服务?

专业工程师在线解答

400-640-9567

全国服务热线

查看报告模版